ASTM C 330 : 2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Lightweight Aggregates for Structural Concrete
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
15-12-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.02, 2006 Covers lightweight aggregates intended for use in structural concrete in which prime considerations are reducing the density while maintaining the compressive strength of the concrete.
| Committee |
C 09
|
| DevelopmentNote |
Supersedes ASTM C 130 (01/2002)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers lightweight aggregates intended for use in structural concrete in which prime considerations are reducing the density while maintaining the compressive strength of the concrete. Procedures covered in this specification are not intended for job control of concrete.
1.2 The values stated in SI units are to be regarded as the standard. The values shown in parentheses are for information purposes only.
1.2.1 With regard to other units of measure, the values stated in inch-pound units are to be regarded as standard.
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Note 1—This specification is regarded as adequate to ensure satisfactory lightweight aggregates for most concrete. It is recognized that it may be either more or less restrictive than needed for some conditions and for special purposes, such as fire resistance, fill, and concrete constructions, the use of which is based on load tests rather than conventional design procedures.
| ACI 506.5R : 2009 | GUIDE FOR SPECIFYING UNDERGROUND SHOTCRETE |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| CSA S474 :2004 | CONCRETE STRUCTURES |
| API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| AISC 350 : 99 ERRATA 2001 | LOAD AND RESISTANCE FACTOR DESIGN SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
| AASHTO M 241M/M 241 : 2013 | SPECIFICATION FOR CONCRETE MADE BY VOLUMETRIC BATCHING AND CONTINUOUS MIXING |
| ASTM C 913 : 2016-07 | SPECIFICATION FOR PRECAST CONCRETE WATER AND WASTEWATER STRUCTURES |
| ASTM C 294 : 2012 | Standard Descriptive Nomenclature for Constituents of Concrete Aggregates |
| ASTM D 5539 : 2014 : REDLINE | SPECIFICATION FOR SEED STARTER MIX |
| ASTM C 915 : 1979 : R1995 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| 17/30298929 DC : DRAFT SEP 2017 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ASTM C 915 : 1979 : R2002 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ACI 304.5R : 91(R1997) | BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| CSA ISO 19906 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| UNI EN ISO 19906 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| CTI ESG 123 : 2012 | RECOMMENDED GUIDELINES FOR CONCRETE RESTORATION AND REPAIRS TO NATURAL AND MECHANICAL DRAFT COOLING TOWERS |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| ASTM C 1670 : 2013 | Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units |
| ASTM C 1613 : 2017 : REDLINE | Standard Specification for Precast Concrete Grease Interceptor Tanks |
| ASTM C 825 : 2006 : R2011 | Standard Specification for Precast Concrete Barriers |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| CSA A23.4-A251 : 0 | PRECAST CONCRETE - MATERIALS AND CONSTRUCTION/QUALIFICATION CODE FOR ARCHITECTURAL AND STRUCTURAL PRECAST CONCRETE PRODUCTS |
| CSA ISO 19906 : 2011 : R2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ASTM C 387/C387M : 2017 : REDLINE | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASCE 20 96 : 1997 | STANDARD GUIDELINES FOR THE DESIGN AND INSTALLATION OF PILE FOUNDATIONS |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI PRC-357 : 1984 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF FIXED OFFSHORE CONCRETE STRUCTURES |
| BS EN ISO 19906:2010 | Petroleum and natural gas industries. Arctic offshore structures |
| ACI 213 : 1987(R1999) | GUIDE FOR STRUCTURAL LIGHTWEIGHT-AGGREGATE CONCRETE |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ASTM C 1227 : 2013 : REDLINE | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 294 : 2019 | Standard Descriptive Nomenclature for Constituents of Concrete Aggregates |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| ACI 517.2R : 1992 | ACCELERATED CURING OF CONCRETE AT ATMOSPHERIC PRESSURE |
| ASTM C 1436 : 2013 : REDLINE | Standard Specification for Materials for Shotcrete |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 09/19984091 DC : DRAFT JAN 2009 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ASTM C 1127/C1127M : 2015 : REDLINE | Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| CSA A23.4 : 2016 | PRECAST CONCRETE - MATERIALS AND CONSTRUCTION |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| ACI 303.1 : 1997 | STANDARD SPECIFICATION FOR CAST-IN-PLACE ARCHITECTURAL CONCRETE |
| ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 549.1R : 1993 | GUIDE FOR THE DESIGN, CONSTRUCTION AND REPAIR OF FERROCEMENT |
| ASTM C 685/C685M : 2017 : REDLINE | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 915 : 1979 : R2010 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM E 2788 : 2011 | Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems |
| EN ISO 19906:2010 | Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010) |
| AISC 335 : 89 SUPP 1 1999 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS - ALLOWABLE STRESS DESIGN, PLASTIC DESIGN |
| CSA S474 : 2004 : R2014 | CONCRETE STRUCTURES |
| ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
| NACE RP 01 87 : 2005 | DESIGN CONSIDERATIONS FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
| I.S. EN ISO 19906:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ASTM C 825 : 2006 | Standard Specification for Precast Concrete Barriers |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM C 294 : 2012 : R2017 | Standard Descriptive Nomenclature for Constituents of Concrete Aggregates |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ASME NQA 2 : 89 SPECIAL NOTICE | QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |
| ASTM C 151 : 2005 | Standard Test Method for Autoclave Expansion of Hydraulic Cement |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM C 142 : 1997 | Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C 641 : 2017 : REDLINE | Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates |
| ASTM C 702 : 1998 | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 496/C496M : 2017 : REDLINE | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
| ASTM C 157/C157M : 2017 : REDLINE | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
| ASTM C 40 : 2004 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.