Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1767 : 2021

Current

Current

The latest, up-to-date edition.

Standard Specification for Stainless Steel Jacketing for Insulation

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

26-03-2021

$103.13
Including GST where applicable

Committee
C 16
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers stainless steel jacketing for thermal, acoustical, and fire protective insulation operating at either above or below ambient temperatures and in both indoor and outdoor locations. It does not cover insulation jacketing made from other materials such as mastics, fiber reinforced plastic, PVC, aluminum, or coated carbon steel (for example, aluminum-zinc, galvanized steel, or aluminized steel) nor does it cover the details of thermal, acoustical, or fire protective insulation systems.

1.2While not intended to cover use inside the containment buildings of nuclear power plants, this standard does not preclude use of Class E material which does not have a moisture barrier in this containment building application.

1.3This specification provides physical requirements for stainless steel jacketing for thermal and acoustical insulation. Guide C1423 provides guidance in selecting jacketing materials and their safe use.

1.4This is a material specification and does not imply any performance of the installed system using the materials specified herein. For information about installation of stainless steel jacketing, see (1).2

1.5The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.6A version of this standard in SI units is available as Specification C1767M.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 1767M : 2021 Standard Specification for Stainless Steel Jacketing for Insulation
ASTM C 1785 : 2017 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM C 1423 : 2016 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM F 3319 : 2020 Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships

ASTM D 3363 : 2022 Standard Test Method for Film Hardness by Pencil Test
ASTM A 240/A240M : 2024 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 585 : 2022 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 480/A480M : 2022 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A 480/A480M : 2023 : REV B Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A 480/A480M : 2023 : REV A Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 3363 : 2020 Standard Test Method for Film Hardness by Pencil Test
ASTM C 1423 : 2021 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 168 : 2024 Standard Terminology Relating to Thermal Insulation
ASTM E 84 : 2024 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 240/A240M : 2022 : REV B Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A 240/A240M : 2023 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 240/A240M : 2022 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 1785 : 2024 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM A 480/A480M : 2024 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM C 1371 : 2015 : R2022 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM A 240/A240M : 2024 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 1423 : 2016 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM C 585 : 2010 : R2016 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
ASTM A 240/A240M : 2022 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 240/A240M : 2020 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 168 : 2022 Standard Terminology Relating to Thermal Insulation
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 480/A480M : 2023 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A 480/A480M : 2020 : REV A Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A 240/A240M : 2023 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 1371 : 2015 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM A 480/A480M : 2022 : REV A Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more