ASTM C 169 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
Hardcopy , PDF
20-07-2022
English
01-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis.
| Committee |
C 14
|
| DocumentType |
Test Method
|
| Pages |
24
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis. This would be for the usual constituents present in glasses of the following types: (1) soda-lime silicate glass, (2) soda-lime fluoride opal glass, and (3) borosilicate glass. The following common oxides, when present in concentrations greater than indicated, are known to interfere with some of the determinations in this method: 2 % barium oxide (BaO), 0.2 % phosphorous pentoxide (P2O5), 0.05 % zinc oxide (ZnO), 0.05 % antimony oxide (Sb2O3), 0.05 % lead oxide (PbO).
1.2The analytical procedures, divided into two general groups, those for referee analysis, and those for routine analysis, appear in the following order:
| Sections | ||
| Procedures for Referee Analysis: | ||
| Silica | 10 | |
| BaO, R2O2 (Al2O3 + P2O5), CaO, and MgO | 11 – 15 | |
| Fe2O3, TiO2, ZrO2 by Photometry and Al2O3 by Com- | 16 – 22 | |
| Cr2O3 by Volumetric and Photometric Methods | 23 – 25 | |
| MnO by the Periodate Oxidation Method | 26 – 29 | |
| Na2O by the Zinc Uranyl Acetate Method and K2O by | 30 – 33 | |
| SO3 (Total Sulfur) | 34 – 35 | |
| As2O3 by Volumetric Method | 36 – 40 | |
| Procedures for Routine Analysis: | ||
| Silica by the Single Dehydration Method | 42 – 44 | |
| Al2O3, CaO, and MgO by Complexiometric Titration, | 45 – 51 | |
| BaO, Al2O3, CaO, and MgO by Atomic Absorption; and | 52 – 59 | |
| SO3 (Total Sulfur) | 60 | |
| B2O3 | 61 – 62 | |
| Fluorine by Pyrohydrolysis Separation and Specific Ion | 63 – 66 | |
| P2O5 by the Molybdo-Vanadate Method | 67 – 70 | |
| Colorimetric Determination of Ferrous Iron Using 1,10 | 71 – 76 | |
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 1463 : 2019 | Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis |
| ASTM F 561 : 2019 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM E 708 : 1979 : R2017 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| ASTM C 146 : 2021 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM F 1538 : 2003 : R2017 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
| ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM E 60 : 2011 : R2016 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM C 146 : 1994 : REV A : R2014 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM C 146 : 2021 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM E 60 : 2011 : R2022 : EDT 1 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.