ASTM C 1660 : 2010 : R2018
Current
Current
The latest, up-to-date edition.
Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
04-01-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification applies to thin-bed mortar for autoclaved aerated concrete (AAC) masonry.
| Committee |
C 15
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2018
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification applies to thin-bed mortar for autoclaved aerated concrete (AAC) masonry.
1.2The testing laboratory performing these test methods shall be evaluated in accordance with Practice C1093.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1692 : 2018 | Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry |
| ASTM C 1093 : 2013 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2009 : REV B | Standard Terminology of Masonry |
| ASTM C 1600/C1600M : 2023 | Standard Specification for Rapid Hardening Hydraulic Cement |
| ASTM C 1180 : 2010 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1180 : 2003 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 : REV A | Standard Terminology of Masonry |
| ASTM C 1180 : 2024 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1384 : 2017 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1384 : 2000 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1384 : 2002 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM C 1180 : 2002 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1600/C1600M : 2019 | Standard Specification for Rapid Hardening Hydraulic Cement |
| ASTM C 1093 : 2019 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2013 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1006 : 1984 : R2001 | Standard Test Method for Splitting Tensile Strength of Masonry Units |
| ASTM C 1093 : 1995 | Standard Practice for Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 1329 : 2003 : REV A | Standard Specification for Mortar Cement |
| ASTM C 1386 : 1998 | Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units |
| ASTM C 91 : 2005 | Standard Specification for Masonry Cement |
| ASTM C 1232 : 2005 | Standard Terminology of Masonry |
| ASTM C 1384 : 2012 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1093 : 2015-06 | PRACTICE FOR ACCREDITATION OF TESTING AGENCIES FOR MASONRY |
| ASTM C 1329 : 2000 | Standard Specification for Mortar Cement |
| ASTM C 1384 : 2012 : REV A | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1384 : 2002 : REV A | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1157 : 2002 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1329 : 2004 | Standard Specification for Mortar Cement |
| ASTM C 1157 : 2003 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1093 : 2013 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2015 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2015 | Standard Terminology of Masonry |
| ASTM C 1232 : 2008 | Standard Terminology of Masonry |
| ASTM C 1180 : 2003 : REV A : EDT 1 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1384 : 2001 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2017 : REDLINE | Standard Terminology for Masonry |
| ASTM C 1384 : 2023 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1093 : 2006 | Standard Practice for Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1093 : 2015 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 207 : 2018 | Standard Specification for Hydrated Lime for Masonry Purposes |
| ASTM C 1384 : 2003 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2023 | Standard Terminology for Masonry |
| ASTM C 1180 : 2003 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV C | Standard Terminology of Masonry |
| ASTM C 1180 : 2022 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1386 : 2007 | Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units (Withdrawn 2013) |
| ASTM C 1093 : 2007 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2001 | Standard Terminology of Masonry |
| ASTM C 1093 : 2012 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1006 : 2007 : R2013 | Standard Test Method for Splitting Tensile Strength of Masonry Units |
| ASTM C 1232 : 2010 | Standard Terminology of Masonry |
| ASTM C 1232 : 2009 | Standard Terminology of Masonry |
| ASTM C 1384 : 2018 : EDT 1 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1180 : 2007 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1093 : 2023 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1157 : 2000 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 207 : 2024 | Standard Specification for Hydrated Lime for Masonry Purposes |
| ASTM C 1232 : 2010 : REV B | Standard Terminology of Masonry |
| ASTM C 1006 : 2007 | Standard Test Method for Splitting Tensile Strength of Masonry Units |
| ASTM C 1157 : 2008 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1006 : 1984 : R1996 : EDT 1 | Standard Test Method for Splitting Tensile Strength of Masonry Units |
| ASTM C 1232 : 2024 | Standard Terminology for Masonry |
| ASTM C 1384 : 2006 : REV A | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1093 : 2022 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1384 : 2006 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2021 | Standard Terminology for Masonry |
| ASTM C 1232 : 2002 | Standard Terminology of Masonry |
| ASTM C 1093 : 2008 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1452 : 2000 : R2006 | Standard Specification for Reinforced Autoclaved Aerated Concrete Elements (Withdrawn 2013) |
| ASTM C 1329 : 2005 | Standard Specification for Mortar Cement |
| ASTM C 1600/C1600M : 2017-05 | SPECIFICATION FOR RAPID HARDENING HYDRAULIC CEMENT |
| ASTM C 1384 : 2005 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2000 | Standard Terminology of Masonry |
| ASTM C 1232 : 2009 : REV A | Standard Terminology of Masonry |
| ASTM C 1232 : 2012 | Standard Terminology of Masonry |
| ASTM C 144 : 2018 | Standard Specification for Aggregate for Masonry Mortar |
| ASTM C 1157 : 2008 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 150 : 2002 : REV A : EDT 1 | Standard Specification for Portland Cement |
| ASTM C 1384 : 2018 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1452 : 2000 | Standard Specification for Reinforced Autoclaved Aerated Concrete Elements |
| ASTM C 1232 : 2010 : REV A | Standard Terminology of Masonry |
| ASTM C 1093 : 2009 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2011 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1329 : 2003 | Standard Specification for Mortar Cement |
| ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
| ASTM C 1093 : 2015 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.