Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1602/C1602M : 2022

Current

Current

The latest, up-to-date edition.

Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-07-2022

$103.13
Including GST where applicable

Committee
C 09
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers the compositional and performance requirements for water used as mixing water in hydraulic cement concrete. It defines sources of water and provides requirements and testing frequencies for qualifying individual or combined water sources. In any case where the requirements of the purchaser differ from these in this specification, the purchaser’s specification shall govern.

1.2This specification does not purport to cover methods of storage, transportation, or blending of water, or to address the development and maintenance of quality control programs sponsored or managed by the manufacturer.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 118 : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage
ASTM C 412M : 2019 Standard Specification for Concrete Drain Tile (Metric)
ASTM C 1577 : 2020 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C 1116/C1116M : 2010 : REV A : R2015 Standard Specification for Fiber-Reinforced Concrete
ASTM C 1504M : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
ASTM C 1874 : 2020 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
ASTM C 1731 : 2021 Standard Specification for Concrete Floor Tile
ASTM C 76M : 2022 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 1837 : 2022 Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
ASTM C 1417 : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM C 1433 : 2020 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
ASTM C 412 : 2019 Standard Specification for Concrete Drain Tile
ASTM C 476 : 2020 Standard Specification for Grout for Masonry
ASTM C 506 : 2020 : EDT 1 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
ASTM C 94/C94M : 2021 : REV B Standard Specification for Ready-Mixed Concrete
ASTM C 655 : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM C 1810/C1810M : 2021 : REV A Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
ASTM C 118M : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric) (Withdrawn 2024)
ASTM C 507M : 2020 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 654 : 2019 Standard Specification for Porous Concrete Pipe
ASTM C 1417M : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C 1786 : 2019 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C 1679 : 2017 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C 1603 : 2016 Standard Test Method for Measurement of Solids in Water
ASTM C 655M : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 685/C685M : 2017 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
ASTM C 505M : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM C 1613 : 2022 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
ASTM C 1436 : 2013 Standard Specification for Materials for Shotcrete (Withdrawn 2022)
ASTM C 1903 : 2021 Standard Specification for Precast Concrete Duct Bank
ASTM C 654M : 2019 Standard Specification for Porous Concrete Pipe (Metric)
ASTM C 76 : 2022 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 1433M : 2020 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
ASTM C 505 : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C 1504 : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
ASTM C 985 : 2019 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
ASTM C 361 : 2019 : REV A Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
ASTM C 14 : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
ASTM C 507 : 2020 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM C 1846/C1846M : 2019 Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 14M : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
ASTM C 506M : 2020 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

ASTM C 39/C39M : 2024 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 31/C31M : 2024 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 1603 : 2023 Standard Test Method for Measurement of Solids in Water
ASTM C 31/C31M : 2019 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 33/C33M : 2023 Standard Specification for Concrete Aggregates
ASTM C 94/C94M : 2021 : REV B Standard Specification for Ready-Mixed Concrete
ASTM C 31/C31M : 2022 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 109/C109M : 2020 : REV B Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 305 : 2014 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
ASTM C 31/C31M : 2021 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 33/C33M : 2018 Standard Specification for Concrete Aggregates
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 125 : 2024 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 39/C39M : 2023 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 31/C31M : 2023 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 192/C192M : 2024 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C 31/C31M : 2024 : REV B Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 33/C33M : 2024 Standard Specification for Concrete Aggregates
ASTM C 31/C31M : 2024 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 39/C39M : 2015 : REV A Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 109/C109M : 2020 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 109/C109M : 2023 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50mm [2 in.] Cube Specimens)
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 114 : 2024 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 94/C94M : 2022 : REV A Standard Specification for Ready-Mixed Concrete
ASTM C 94/C94M : 2024 : REV C Standard Specification for Ready-Mixed Concrete
ASTM C 403/C403M : 2023 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 94/C94M : 2024 Standard Specification for Ready-Mixed Concrete
ASTM C 94/C94M : 2024 : REV A Standard Specification for Ready-Mixed Concrete
ASTM C 31/C31M : 2021 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 114 : 2023 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 109/C109M : 2016 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 31/C31M : 2017 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 31/C31M : 2015 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 39/C39M : 2018 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 31/C31M : 2019 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 192/C192M : 2019 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C 94/C94M : 2022 Standard Specification for Ready-Mixed Concrete
ASTM C 403/C403M : 2016 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 94/C94M : 2024 : REV B Standard Specification for Ready-Mixed Concrete
ASTM C 114 : 2018 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 114 : 2022 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 94/C94M : 2023 Standard Specification for Ready-Mixed Concrete

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more