ASTM C 1587/C1587M : 2021 : REV A
Current
The latest, up-to-date edition.
Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
Hardcopy , PDF
English
29-06-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 15
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1The purpose of this practice is to standardize the preparation of manufactured masonry units and masonry specimens extracted from the field for compressive and flexural bond strength testing in a laboratory environment.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 67/C67M : 2021 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 140/C140M : 2022 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 67/C67M : 2023 : REV A | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1072 : 2019 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 140/C140M : 2023 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1180 : 2024 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 140/C140M : 2022 : REV B | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1314 : 2023 : REV B | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 1314 : 2022 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2021 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 140/C140M : 2018 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 67/C67M : 2023 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1232 : 2023 | Standard Terminology for Masonry |
| ASTM C 1532/C1532M : 2021 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 1180 : 2022 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 140/C140M : 2022 : REV C | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1072 : 2022 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2022 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 140/C140M : 2020 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1232 : 2024 | Standard Terminology for Masonry |
| ASTM C 140/C140M : 2024 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1232 : 2021 | Standard Terminology for Masonry |
| ASTM C 1532/C1532M : 2022 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 140/C140M : 2020 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1314 : 2023 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 140/C140M : 2023 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 140/C140M : 2022 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
| ASTM C 140/C140M : 2021 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1314 : 2023 | Standard Test Method for Compressive Strength of Masonry Prisms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.