ASTM C 1558 : 2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
Available format(s)
Hardcopy , PDF
Superseded date
28-03-2024
Superseded by
Language(s)
English
Published date
14-03-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This guide provides recommended formats for the recording of thermal transmission test data for thermal insulation and similar materials for inclusion in computerized material property databases.
| Committee |
C 16
|
| DocumentType |
Guide
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide provides recommended formats for the recording of thermal transmission test data for thermal insulation and similar materials for inclusion in computerized material property databases. From this information, the database designer is able to construct the database dictionary preparatory for development of a database schema.
1.2This guide is applicable to thermal transmission test data obtained from standard test methods that cover planar and radial specimen geometries.
1.3This guide is not intended for thermal transmission data obtained for thermal insulation assemblies or systems (that is, heat transmission coefficients for walls, roofs, ceilings, and floors).
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1014 : 2008 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1410 : 2010 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1534 : 2012 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1029 : 2007 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1728 : 2023 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1676 : 2008 | Standard Specification for Microporous Thermal Insulation |
| ASTM C 1126 : 2003 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1029 : 2005 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1289 : 2015 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1289 : 2011 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1534 : 2022 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1029 : 2010 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1289 : 2014 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 533 : 2017 | Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation |
| ASTM C 1482 : 2008 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 1045 : 2019 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1631 : 2005 | Standard Specification for Cellular Polypropylene Thermal Insulation |
| ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 208 : 2022 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 1114 : 2006 : R2013 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1114 : 2006 : R2019 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1534 : 2017 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1045 : 2007 : R2013 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 991 : 2023 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings |
| ASTM C 1534 : 2020 : REV A | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1029 : 1996 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1029 : 2009 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1289 : 2016 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1029 : 2002 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1149 : 2017 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 547 : 2022 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 1482 : 2002 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1014 : 2003 : EDT 1 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1290 : 2004 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 728 : 2017 : REV A : R2022 | Standard Specification for Perlite Thermal Insulation Board |
| ASTM C 1289 : 2012 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1594 : 2011 : R2017 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1427 : 2007 : EDT 1 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1484 : 2000 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1482 : 2010 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1290 : 2006 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1363 : 2019 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1427 : 2012 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1410 : 2017 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 552 : 2000 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 1290 : 2006 : EDT 1 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 592 : 2022 : REV A | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 1290 : 2016 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1071 : 1998 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1363 : 2005 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1086 : 2009 : R2016 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 1071 : 2016 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1363 : 1997 | Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1071 : 2005 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1289 : 2023 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1289 : 2008 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1728 : 2022 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 549 : 2018 | Standard Specification for Perlite Loose Fill Insulation |
| ASTM C 1594 : 2011 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1410 : 2012 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1410 : 2005 : REV A : EDT 1 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1728 : 2012 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1044 : 2012 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode |
| ASTM C 1482 : 2004 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1044 : 2007 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode |
| ASTM C 1427 : 1999 : REV A | Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1290 : 2016 : R2021 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1289 : 2022 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 547 : 2019 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 1290 : 2011 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1631 : 2008 | Standard Specification for Cellular Polypropylene Thermal Insulation |
| ASTM C 552 : 2021 : REV A | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 592 : 2008 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 547 : 2022 : REV A | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 1685 : 2008 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM C 1534 : 2007 : EDT 1 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1149 : 2002 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1114 : 2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1149 : 2011 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1045 : 2001 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1289 : 2006 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 518 : 2002 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1410 : 2005 : REV A | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1290 : 1995 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1086 : 2008 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 578 : 2019 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C 1071 : 2019 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 739 : 2017 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 1014 : 2003 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1044 : 1998 | Standard Practice for Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat Flux and Thermal Transmission Properties |
| ASTM C 1086 : 2020 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 1728 : 2020 : REV B | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1126 : 2000 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 739 : 2021 : REV A | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 1126 : 2010 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1427 : 2021 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1289 : 2008 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1410 : 2013 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1071 : 2005 : EDT 1 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 533 : 2017 : R2023 | Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation |
| ASTM C 1410 : 1998 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1126 : 2010 : REV A | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1534 : 2014 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1289 : 2005 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1289 : 2007 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 656 : 2017 : R2023 | Standard Specification for Structural Insulating Board, Calcium Silicate |
| ASTM C 1427 : 2016 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 552 : 2021 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 1482 : 2023 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1289 : 2012 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 665 : 2023 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 1289 : 2014 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1114 : 2000 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1594 : 2004 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1126 : 2012 : REV A | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1071 : 2012 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1482 : 2000 : EDT 1 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 549 : 2023 | Standard Specification for Perlite Loose Fill Insulation |
| ASTM C 1126 : 2014 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1482 : 2001 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1534 : 2019 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1289 : 2005 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 578 : 2022 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C 1149 : 2023 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 726 : 2017 | Standard Specification for Mineral Wool Roof Insulation Board |
| ASTM C 1363 : 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1534 : 2002 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1149 : 1997 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1289 : 2023 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1685 : 2015 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM C 592 : 2022 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 1126 : 2018 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1289 : 2001 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 552 : 2017 : EDT 1 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 1029 : 2008 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1149 : 2006 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1289 : 2013 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1410 : 2017 : R2023 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1289 : 2002 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1534 : 2004 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1484 : 2001 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1289 : 2022 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 610 : 2017 : R2023 | Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
| ASTM C 1126 : 2011 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1071 : 2000 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 739 : 2021 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 728 : 2017 : REV A | Standard Specification for Perlite Thermal Insulation Board |
| ASTM C 991 : 2016 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings |
| ASTM C 1086 : 2009 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1289 : 2010 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1086 : 1996 | Standard Specification for Glass Fiber Felt Thermal Insulation |
| ASTM C 1728 : 2013 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1114 : 2000 : R2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1290 : 2000 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1045 : 1997 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 610 : 2017 | Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
| ASTM C 1029 : 2013 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1685 : 2015 : R2021 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM C 1289 : 2020 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1289 : 2016 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1427 : 2004 | Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1289 : 2018 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1482 : 2011 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 177 : 2019 : EDT 1 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 1289 : 2012 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1014 : 1999 : REV A : EDT 1 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1126 : 1998 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1289 : 2021 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1484 : 2010 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1126 : 2013 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1728 : 2021 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 208 : 2012 : R2017 : EDT 2 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 1289 : 2004 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 578 : 2023 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C 1728 : 2020 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1482 : 2000 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1126 : 2012 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1427 : 2013 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1534 : 2007 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1126 : 2015 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1728 : 2020 : REV A | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1594 : 2007 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1044 : 2016 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode |
| ASTM C 665 : 2017 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 1149 : 2006 : EDT 1 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1482 : 2012 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1594 : 2010 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1126 : 2013 : REV A | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 1410 : 2014 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1594 : 2023 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1482 : 2009 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1289 : 2013 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1149 : 2008 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1289 : 2011 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1484 : 2010 : R2018 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1427 : 2007 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1029 : 2015 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1014 : 2008 : R2013 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1482 : 2017 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1289 : 2017 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1728 : 2017 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1534 : 2018 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1126 : 2011 : EDT 1 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1014 : 2017 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1126 : 2004 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 592 : 2016 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 552 : 2022 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 1045 : 2007 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1126 : 2019 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1484 : 2007 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 656 : 2017 | Standard Specification for Structural Insulating Board, Calcium Silicate |
| ASTM C 1289 : 2003 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1484 : 2009 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1289 : 1998 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 518 : 1998 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1289 : 2018 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 1029 : 2005 : REV A | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1290 : 2000 : EDT 1 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.