ASTM C 1184 : 2018 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Structural Silicone Sealants
Hardcopy , PDF
09-06-2023
English
08-08-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.1.1This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant.
| Committee |
C 24
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.
1.2Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.
1.3The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.
1.4Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1193 : 2016 | Standard Guide for Use of Joint Sealants |
| ASTM C 1021 : 2008 : R2019 | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
| ASTM C 1564 : 2015 | Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
| ASTM C 1369 : 2019 | Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
| ASTM C 1564 : 2020 | Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
| ASTM C 1193 : 2016 : R2023 | Standard Guide for Use of Joint Sealants |
| ASTM C 1249 : 2018 : R2023 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
| ASTM C 1021 : 2008 : R2023 | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
| ASTM C 1249 : 2018 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
| ASTM C 792 : 2023 | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
| ASTM C 1401 : 1998 | Standard Guide for Structural Sealant Glazing |
| ASTM C 1401 : 2009 | Standard Guide for Structural Sealant Glazing |
| ASTM C 794 : 2018 | Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
| ASTM C 1442 : 2011 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM C 1401 : 2009 : REV A | Standard Guide for Structural Sealant Glazing |
| ASTM C 661 : 2015 : R2022 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
| ASTM C 1401 : 2014 : R2022 | Standard Guide for Structural Sealant Glazing |
| ASTM C 1087 : 2023 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM G 154 : 2016 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM C 1135 : 2000 : R2011 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
| ASTM C 1087 : 2000 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 661 : 2015 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
| ASTM G 154 : 2023 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials |
| ASTM C 1135 : 2019 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 1442 : 2014 : R2021 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM C 1135 : 2000 : R2005 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 1442 : 2014 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
| ASTM C 1442 : 2006 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM C 1135 : 2000 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 794 : 2018 : R2022 | Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
| ASTM C 1135 : 2015 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 1087 : 2016 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 1087 : 2000 : R2011 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 679 : 2015 : R2022 | Standard Test Method for Tack-Free Time of Elastomeric Sealants |
| ASTM C 1442 : 2003 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM C 792 : 2015 : R2020 | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
| ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM C 1401 : 2002 | Standard Guide for Structural Sealant Glazing |
| ASTM C 1401 : 2007 | Standard Guide for Structural Sealant Glazing |
| ASTM C 679 : 2015 | Standard Test Method for Tack-Free Time of Elastomeric Sealants |
| ASTM C 1442 : 1999 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
| ASTM C 1087 : 2000 : R2006 : EDT 1 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 1087 : 2000 : R2006 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.