ASTM C 1180 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology of Mortar and Grout for Unit Masonry
Hardcopy , PDF
08-07-2024
English
16-01-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 12
|
| DocumentType |
Reference Material
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology covers terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations, acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C12 on Mortars and Grouts for Unit Masonry.
1.2The definitions and descriptions of terms in this terminology pertain to Test Methods C780, C1019, C1148, C1324, and C1403; Specifications C144, C270, C404, C476, C887, and C1384; Practice C946; and Guide C1586.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1384 : 2018 : EDT 1 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 887 : 2019 : REV A | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ASTM C 1825 : 2019 | Standard Guide for Developing Specifications for Masonry Units |
| ASTM C 1532/C1532M : 2019 : REV A | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 1660 : 2010 : R2018 | Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry |
| ASTM C 1531 : 2016 | Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index |
| ASTM C 1780 : 2018 : REV A | Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer |
| ASTM C 1196 : 2014 : REV A | Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements |
| ASTM C 144 : 2018 | Standard Specification for Aggregate for Masonry Mortar |
| ASTM C 1324 : 2015 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 1722 : 2018 | Standard Guide for Repair and Restoration of Dimension Stone |
| ASTM C 1714/C1714M : 2019 : REV A | Standard Specification for Preblended Dry Mortar Mix for Unit Masonry |
| ASTM E 2266 : 2011 : R2019 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM C 780 : 2019 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1197 : 2014 : REV A | Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method |
| ASTM C 1791 : 2016 | Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems |
| ASTM C 1713 : 2017 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 901 : 2018 | Standard Specification for Prefabricated Masonry Panels |
| ASTM C 1400 : 2011 : R2017 | Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls |
| ASTM C 1403 : 2015 | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM C 1587/C1587M : 2015 | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 404 : 2018 | Standard Specification for Aggregates for Masonry Grout |
| ASTM E 2266 : 2022 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM C 780 : 2020 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1780 : 2020 | Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer |
| ASTM C 887 : 2020 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ASTM C 1324 : 2020 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 1892/C1892M : 2020 : REV A | Standard Test Methods for Strength of Anchors in Masonry |
| ASTM C 1196 : 2020 | Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements |
| ASTM C 1197 : 2020 : EDT 1 | Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method |
| ASTM C 1791 : 2016 : R2021 | Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems |
| ASTM C 1587/C1587M : 2021 : REV A | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 1532/C1532M : 2021 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 1314 : 2021 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
| ASTM C 1324 : 2015 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 1384 : 2002 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 1324 : 1996 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 946 : 1991 : R1996 : EDT 1 | Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls |
| ASTM C 1324 : 2020 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 887 : 1979 : REV A : R1996 : EDT 1 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ASTM C 1232 : 2021 | Standard Terminology for Masonry |
| ASTM C 404 : 1997 | Standard Specification for Aggregates for Masonry Grout |
| ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
| ASTM C 780 : 2000 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.