ASTM C 114 : 2009
NA
Status of Standard is Unknown
Standard Test Methods for Chemical Analysis of Hydraulic Cement
Hardcopy , PDF
English
31-12-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 01
|
| DocumentType |
Test Method
|
| Pages |
32
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.
1.2 Contents:
| Section | Subject |
| 2 | Referenced Documents |
| 3 | Number of Determinations and Permissible Variations |
| 3.1 | Referee Analyses |
| 3.2 | Optional Analyses |
| 3.3 | Performance Requirements for Rapid Test Methods |
| 3.4 | Precision and Bias |
| 4 | General |
| 4.1 | Interferences and Limitations |
| 4.2 | Apparatus and Materials |
| 4.3 | Reagents |
| 4.4 | Sample Preparation |
| 4.5 | General Procedures |
| 4.6 | Recommended Order for Reporting Analyses |
| Reference Test Methods | |
| 5 | Insoluble Residue |
| 6 | Silicon Dioxide |
| 6.2 | Cements with Insoluble Residue Less Than 1 % |
| 6.3 | Cements with Insoluble Residue Greater Than 1 % |
| 7 | Ammonium Hydroxide Group |
| 8 | Ferric Oxide |
| 9 | Phosphorus Pentoxide |
| 10 | Titanium Dioxide |
| 11 | Zinc Oxide |
| 12 | Aluminum Oxide |
| 13 | Calcium Oxide |
| 14 | Magnesium Oxide |
| 15 | Sulfur |
| 15.1 | Sulfur Trioxide |
| 15.2 | Sulfide |
| 16 | Loss On Ignition |
| 16.1 | Portland Cement |
| 16.2 | Portland Blast-Furnace Slag Cement and Slag Cement |
| 17 | Sodium and Potassium Oxides |
| 17.1 | Total Alkalis |
| 17.2 | Water-Soluble Alkalis |
| 18 | Manganic Oxide |
| 19 | Chloride |
| 20 | Chloroform-Soluble Organic Substances |
| Alternative Test Methods | |
| 21 | Calcium Oxide |
| 22 | Carbon Dioxide |
| 23 | Magnesium Oxide |
| 24 | Loss on Ignition |
| 24.1 | Portland Blast-Furnace Slag Cement and Slag Cement |
| 25 | Titanium Dioxide |
| 26 | Phosphorus Pentoxide |
| 27 | Manganic Oxide |
| 28 | Free Calcium Oxide |
| Appendices | Title |
| Appendix X1 | Example of Determination of Equivalence Point for the Chloride Determination |
| Appendix X2 | CO2 Determinations in Hydraulic Cements |
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 6.3.2.1 and 14.4.1 for specific caution statements.
| ASTM C 465 : 2019 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 1580 : 2020 | Standard Test Method for Water-Soluble Sulfate in Soil |
| ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 1524 : 2020 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM C 219 : 2020 : REV A | Standard Terminology Relating to Hydraulic and Other Inorganic Cements |
| ASTM C 1872 : 2018 : EDT 2 | Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement |
| ASTM C 331/C331M : 2017 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C 458/C458M : 1998 : R2019 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products (Withdrawn 2022) |
| ASTM C 1778 : 2020 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
| ASTM C 1084 : 2019 | Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete |
| ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 330/C330M : 2017 : REV A | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C 1038/C1038M : 2019 | Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water |
| ASTM E 2060 : 2006 : R2014 | Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
| ASTM C 989/C989M : 2018 : REV A | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 1709 : 2018 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
| ASTM C 1012/C1012M : 2018 : REV B | Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
| ASTM F 412 : 2020 : REV A | Standard Terminology Relating to Plastic Piping Systems |
| ASTM C 1761/C1761M : 2017 | Standard Specification for Lightweight Aggregate for Internal Curing of Concrete |
| ASTM C 595/C595M : 2020 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 1875 : 2018 | Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) |
| ASTM C 311/C311M : 2018 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 1707 : 2018 | Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes |
| ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1218/C1218M : 2020 | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
| ASTM D 806 : 2019 | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM C 10/C10M : 2019 | Standard Specification for Natural Cement |
| ASTM C 1005 : 2020 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements |
| ASTM C 183/C183M : 2016 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 1697 : 2018 | Standard Specification for Blended Supplementary Cementitious Materials |
| ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM C 1096/C1096M : 2007 : R2019 | Standard Test Method for Determination of Wood Fiber in Asbestos Cement (Withdrawn 2022) |
| ASTM C 226 : 2019 | Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement |
| ASTM C 1240 : 2020 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 563 : 2020 | Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement |
| ASTM C 188 : 2017 | Standard Test Method for Density of Hydraulic Cement |
| ASTM C 786/C786M : 2017 | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
| ASTM C 1600/C1600M : 2019 | Standard Specification for Rapid Hardening Hydraulic Cement |
| ASTM C 1365 : 2018 | Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
| ASTM C 1152/C1152M : 2020 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 1608 : 2017 | Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste |
| ASTM C 1324 : 2020 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 845/C845M : 2018 | Standard Specification for Expansive Hydraulic Cement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.