Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 633 : 2023

Current

Current

The latest, up-to-date edition.

Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-01-2023

$103.13
Including GST where applicable

Committee
B 08
DocumentType
Standard
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers material and process requirements for electrodeposited zinc coatings applied to iron or steel articles to protect them from corrosion.

1.2This specification is not intended to provide the design activity with all the background needed to properly specify their zinc coating requirements. The users of Specification B633 are encouraged to review this specification in its entirety including the appendices, and access the supplementary papers, other standards, and published literature referenced herein and within other related references.

1.3The coatings are provided in four standard thickness classes (4.1), in the as-plated condition or with one of five types of supplementary finishes (4.2).

1.4High strength metals, including high strength steels having a tensile strength greater than 1700 MPa (247 ksi, 46 HRC) should not be zinc electroplated in accordance with this specification.

1.5It does not cover continuous processes for electrodeposited zinc coated steel wire or sheets (see Specification A591/A591M for sheets).

1.6For zinc electroplating of mechanical fasteners, the purchaser is encouraged to consider Specification F1941/F1941M.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This standard has been revised to address RoHS requirements that seek to limit the exposure of workers and the public from exposure to toxic metals. Additional types V and VI have been added to permit non-chromate passivate treatments to be used in replacement of hexavalent chromium.

1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 6255/D6255M : 2018 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM A 760/A760M : 2015 : R2020 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM F 1548 : 2001 : R2018 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM B 745/B745M : 2015 : R2021 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM F 1387 : 2019 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM A 762/A762M : 2019 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
ASTM A 193/A193M : 2022 : REV A Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM D 5363 : 2016 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM F 1476 : 2007 : R2019 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM A 1105 : 2017 : R2022 Standard Specification for Corrugated Steel Manhole Assemblies
ASTM A 1107/A1107M : 2017 : R2022 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
ASTM F 1941/F1941M : 2016 Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
ASTM A 194/A194M : 2022 : REV A Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM F 1145 : 2005 : R2022 Standard Specification for Turnbuckles, Swaged, Welded, Forged
ANSI/AWWA C509:2023 Resilient-Seated Gate Valves for Water Supply Service
SAE AS40401:2000(R2023) Solenoid, Electrical, General Specification for AS40401

ASTM B 201 : 1980 : R2019 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
ASTM B 571 : 2018 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
ASTM B 571 : 2023 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
ASTM B 849 : 2002 : R2023 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
ASTM B 117 : 2019 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B 504 : 1990 : R2017 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
ASTM B 504 : 1990 : R2023 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
ASTM B 849 : 2002 : R2019 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
ASTM F 1470 : 2019 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1470 : 2024 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 1940 : 2007 : REV A : R2024 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM B 201 : 1980 : R2024 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more