ASTM B 62 : 2017 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Specification for Composition Bronze or Ounce Metal Castings
Available format(s)
PDF
Language(s)
English
Published date
01-04-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.01, 2017 Defines requirements for an alloy having a composition of copper, tin, lead, and zinc, used for component castings of valves, flanges, and fittings.
| Committee |
B 05
|
| DevelopmentNote |
Supersedes QQ C 390 (B). (07/2004)
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification2 establishes requirements for an alloy having a composition of copper, tin, lead, and zinc, used for component castings of valves, flanges, and fittings. The common trade name of this alloy is 85-5-5-5; the correct identification is Copper Alloy UNS No. C83600.3
1.2The castings covered are used in products that may be manufactured in advance and supplied from stock from the manufacturer or other dealer.
1.3Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| A-A-59440-17 Base Document:2012 | Valve, Trap, Strainer, Water, Oil, and Gas (WOG) |
| MIL-W-19044 Revision E:1993 | WASHER-EXTRACTOR MACHINE, LAUNDRY, COMMERCIAL (NAVAL SHIPBOARD) |
| MSS SP 125 : 2010 | GRAY IRON AND DUCTILE IRON IN-LINE, SPRING-LOADED, CENTER-GUIDED CHECK VALVES |
| A-A-59440-1 Revision B:2012 | COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| A-A-59440-2 Revision B:2012 | COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM F 721 : 1981 : R2014 | Standard Specification for Gage Piping Assemblies |
| CSA 6.32:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| A-A-59440-7 Revision B:2012 | Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
| MIL V 13612 : E | VALVE, RELIEF, PRESSURE AND TEMPERATURE (FOR HOT WATER SUPPLY SYSTEMS) |
| A-A-59006 Base Document:1996 | INDICATORS, PIPELINE, FLOW, SIGHT |
| MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| ASTM F 1380 : 1995 : REV A | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-S-24686 Revision A:1992 | Sprinkler, Automatic, Quick Response |
| A-A-59469 Base Document:1999 | Washer-Extractor, Laundry, 35 to 200 Pound Capacity (Naval Shipboard) |
| OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
| MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-20064 Revision F:2014 | Valve, Nonferrous, for Use with Halogenated Refrigerants |
| A-A-59440-13 Base Document:2012 | Valve, Relief, Angle, Steam |
| MS35759 Revision C:2008 | CUPS, GREASE, AUTOMATIC FEED |
| MIL V 24624 : 0 | VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE |
| MIL-P-24589 Revision A:1992 | Proportioner Systems, Balanced Pressure, Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| MIL V 18436 : F | VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY |
| A-A-59440-11 Base Document:2012 | Valve, Swing, Check-Valve, Steam |
| A-A-59440-4 Revision B:2012 | COCK-VALVE, DRAIN, GROUND KEY, 150 PSI, BRASS, STEAM PRESSURE, NPTF-1 THREADS |
| MIL-DTL-16556 Revision F:2017 | Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use ) |
| A-A-59440-5 Revision B:2012 | Cock-Valve, Drain, Ground Key, Bib Nozzle 150 PSI, Steam Pressure, Brass, NPTF-1 Threads |
| A-A-59440-18 Base Document:2012 | Valve, Trap, Strainer, Steam |
| MIL-DTL-23554 Revision E:2009 | WASHER-EXTRACTOR, LAUNDRY, 16- TO 20-POUND CAPACITY (SUBMARINE SERVICE) |
| A-A-59440-8 Revision B:2012 | Cock-Valve, Shut-Off, Screw Stem, Threaded Type, 50 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
| MSS SP 123 : 2013 | NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASTM F 3226/F3226M : 2016 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| A-A-59440-3 Revision B:2012 | COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| A-A-59440-9 Revision B:2012 | Cock-Valve, Plug, Ground Key, Threaded Type, Brass, 125 PSI Steam, NPTF-1 Threads |
| AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| A-A-59440-14 Base Document:2012 | Valve, Flapper, Check-Swing, Water |
| AWWA C700 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE |
| AWWA C518 : 2013 | DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM F 1508 : 1996 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 3226/F3226M : 2016 : EDT 1 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| ASTM F 1974:2009 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
| ASTM F 1245 : 1989 | SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD |
| ASTM F 1380 : 1995 : REV A : R2002 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 721 : 1981 : R1998 | Standard Specification for Gage Piping Assemblies |
| ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
| ASTM F 721 : 1981 : R2008 | Standard Specification for Gage Piping Assemblies |
| ASTM F 1508 : 1996 : R2010 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.3:2016 | PROCESS PIPING |
| ASTM F 1370 : 1992 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| MIL V 16271 : F | VALVE, TANK FLOAT, ANGLE AND GLOBE PATTERN |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| MSS SP 81 : 2017 | STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS |
| A-A-59440-10 Base Document:2012 | Valve, Inline Check-Valve, Water, Oil, and Gas (WOG) |
| AWWA C507 : 2015 | BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
| A-A-59440-15 Base Document:2012 | Valve, Relief, Angle, Water, Oil, and Gas (WOG) |
| ASTM F 1370 : 1992 : R2011 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ANSI/AWWA C710 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| CSA B137 COMPENDIUM : 2017 | THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
| AWWA C713 : 2015 | COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE |
| MIL-PRF-12125 Revision H:2011 | VALVE, GATE: QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL-A-17204 Revision D:1982 | ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD |
| ASTM F 721 : 1981 : R2004 | Standard Specification for Gage Piping Assemblies |
| A-A-59471 Base Document:1999 | Dry Cleaning Presses and Finishing Equipment (Naval Shipboard) |
| MIL V 12125 : F | VALVE, GATE, QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
| A-A-59440-16 Base Document:2012 | Valve, Angle, Shutoff, Water, Oil, and Gas (WOG) |
| BS 1560-3.3:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for copper alloy and composite flanges |
| MIL-R-24414 Revision D:1991 | Reels and Guides, Hose, Firefighting, Manually Operated |
| MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM F 1508 : 1996 : R2004 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
| A-A-2622 Revision A:1998 | ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING |
| MIL-V-15020 Revision F:1968 | VALVE, FLUSH (SHIPBOARD) |
| AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
| CSA 6.32 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| MIL-C-1203 Revision C:1973 | COCKS, DRAIN, COCKS PLUG, AND COCKS, SHUTOFF, SCREW STEM |
| MIL-S-16293 Revision G:1980 | STRAINER, SEDIMENT, PIPELINE, WATER, AIR, GAS, OIL, OR STEAM |
| MIL-I-20037 Revision B:1984 | INDICATORS, SIGHT, LIQUID LEVEL, DIRECT INDIRECT READING, TUBULAR GLASS PLASTIC |
| WW-T-696 Revision E:1984 | TRAPS, STEAM |
| MIL-G-24748 Revision A:1994 | GASKETS, METALLIC & RUBBER, FOR USE IN UNION PIPE FITTINGS 1/4 TO 2 INCH NPS WITH VARIOUS FLUIDS FROM MINUS 30 DEGREES F (MINUS 34 DEGREES C) TO 425 DEGREES F (218 DEGREES C) |
| A-A-59440-6 Revision B:2012 | Cock-Valve, Plug, Three-Way, Threaded Type, Brass, 125 PSI, NPTF-1 Threads, Water, Oil and Gas (WOG) |
| ASTM F 1370 : 1992 : R2005 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM F 1508 : 1996 : R2016 : EDT 1 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ASTM E 310 : 2015 : REDLINE | Standard Reference Radiographs for Tin Bronze Castings |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| MSS SP 88 : 2015 | DIAPHRAGM VALVES |
| ASTM B 30 : 2016 : REDLINE | Standard Specification for Copper Alloys in Ingot Form |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| CSA/ANSI LC 4 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
| CSA/ANSI LC 4:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| CSA/ANSI LC 4-2012 (R2017)/CSA 6.32-2012 (R2016) | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
| ASME B16.51 : 2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME B16.23 : 2016 | CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASTM B 208 : 2014 : REDLINE | Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM B 846 : 2011-07 | TERMINOLOGY FOR COPPER AND COPPER ALLOYS |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.