ASTM B 584 : 2014 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Copper Alloy Sand Castings for General Applications
Available format(s)
PDF
Superseded date
08-11-2022
Superseded by
Language(s)
English
Published date
14-06-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.01, 2017 Defines the requirements for copper alloy sand castings for general applications.
| Committee |
B 05
|
| DevelopmentNote |
Supersedes ASTM B 119, ASTM B 132, ASTM B 143, ASTM B 144, ASTM B 145, ASTM B 146, ASTM B 147, ASTM B 149, ASTM B 198 and ASTM B 292 (01/2002) Supersedes MIL C 11866 (C). (06/2004) Supersedes QQ C 390 (B). (07/2004)
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers requirements for copper alloy sand castings for general applications. Nominal compositions of the alloys defined by this specification are shown in Table 1.2 This is a composite specification replacing former documents as shown in Table 1.
Note 1—Other copper alloy castings are included in the following ASTM Specifications: B22/B22M, B61, B62, B66, B67, B148, B176, B271/B271M, B369, B427, B505/B505M, B763/B763M, B770, and B806.
1.2Component part castings produced to this specification may be manufactured in advance and supplied from stock. In such cases the manufacturer shall maintain a general quality certification of all castings without specific record or date of casting for a specific casting.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
| Standards | Relationship |
| SAE AMS4862F | Identical |
| MIL-DTL-29210-2 Base Document:2010 | HOSE ASSEMBLY, IRON, BRASS, AND CRES CONNECTORS, RUBBER, METAL LINED, WIRE REINFORCED, 1.250, 1.500, AND 2.000 INCH HOSE, 250 PSIG, SATURATED STEAM SERVICE |
| A-A-59440-17 Base Document:2012 | Valve, Trap, Strainer, Water, Oil, and Gas (WOG) |
| ASTM F 1987 : 2001 | Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| MIL V 1189 : D | VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE] |
| MIL-DTL-52404 Revision C:2010 | CONNECTIONS: HOSE, FIRE AND WATER |
| MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MSS SP 125 : 2010 | GRAY IRON AND DUCTILE IRON IN-LINE, SPRING-LOADED, CENTER-GUIDED CHECK VALVES |
| A-A-59440-1 Revision B:2012 | COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| A-A-59440-2 Revision B:2012 | COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| MIL-DTL-15743-10 Revision C:2007 | Switch, Rotary, Enclosed, Submersible (15 Feet), Snap Action, 500 Volts Alternating Current/250 Volts Direct Current, 30 Ampere, Symbol 852 (4PDT) |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| MIL-DTL-15743-9 Revision C:2007 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 839.1 (4PDT), 848.1 (TPDT), AND 2752.1 (SPECIAL) |
| AWWA C800 : 2014 | UNDERGROUND SERVICE LINE VALVES AND FITTINGS |
| MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
| MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
| A-A-59440-7 Revision B:2012 | Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
| MS14308 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 125 |
| MIL V 13612 : E | VALVE, RELIEF, PRESSURE AND TEMPERATURE (FOR HOT WATER SUPPLY SYSTEMS) |
| ASTM F 998 : 2012 | Standard Specification for Centrifugal Pump, Shipboard Use |
| MS14314 Revision E:2015 | PLUGS, PIPE, BRASS OR BRONZE, THREADED (SQUARE HEAD AND SQUARE SOCKET), CLASSES 250 AND 125 |
| MIL-H-24580 Base Document:1974 | HOSE ASSEMBLIES, SYNTHETIC RUBBER, NON-COLLAPSIBLE, FIRE FIGHTING |
| AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM B 30 : 2016 : REDLINE | Standard Specification for Copper Alloys in Ingot Form |
| ANSI/AWWA C561 : 2014 | FABRICATED STAINLESS-STEEL SLIDE GATES |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| ASTM F 3226/F3226M : 2016 : EDT 1 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| ASTM F 1986 : 2001 : R2006 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASTM F 2798 : 2009 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| ASTM E 272 : 2015 : REDLINE | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1986 : 2001 : R2011 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) |
| ASTM F 2798 : 2009 : R2018 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| MIL-L-15596 Revision G:1988 | LOCK, COMBINATION (SAFE AND SAFE LOCKER) |
| NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-B-44037 Revision A:1986 | BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-S-24686 Revision A:1992 | Sprinkler, Automatic, Quick Response |
| OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
| MIL-P-53065 Base Document:1986 | PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-24646 Revision C:2015 | FUSE BOXES, GENERAL SPECIFICATION FOR |
| MIL-DTL-20064 Revision F:2014 | Valve, Nonferrous, for Use with Halogenated Refrigerants |
| A-A-59440-13 Base Document:2012 | Valve, Relief, Angle, Steam |
| MS35759 Revision C:2008 | CUPS, GREASE, AUTOMATIC FEED |
| MIL V 18436 : F | VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY |
| A-A-59440-11 Base Document:2012 | Valve, Swing, Check-Valve, Steam |
| A-A-59440-4 Revision B:2012 | COCK-VALVE, DRAIN, GROUND KEY, 150 PSI, BRASS, STEAM PRESSURE, NPTF-1 THREADS |
| A-A-59440-5 Revision B:2012 | Cock-Valve, Drain, Ground Key, Bib Nozzle 150 PSI, Steam Pressure, Brass, NPTF-1 Threads |
| ASTM F 1380 : 1995 : REV A : R2002 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| A-A-59440-18 Base Document:2012 | Valve, Trap, Strainer, Steam |
| MS14305 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 125 |
| CSA 6.32:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| A-A-59440-8 Revision B:2012 | Cock-Valve, Shut-Off, Screw Stem, Threaded Type, 50 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
| MIL-DTL-15743-3 Revision C:2007 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 801.2 (DPST), 804.1 (TPST), 829.1 (DPDT), AND 879.1 (DPTT) |
| MIL V 12125 : F | VALVE, GATE, QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
| MSS SP 123 : 2013 | NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
| MIL-I-24783 Base Document:1993 | ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE |
| MIL-P-10360 Revision G:1993 | PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| MS14309 Revision E:2015 | TEES, PIPE, BRASS OR BRONZE, THREADED, REDUCING, CLASS 125 |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
| A-A-59440-3 Revision B:2012 | COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
| ASTM F 956 : 1991 : R2012 | Standard Specification for Bell, Cast, Sound Signalling |
| A-A-59440-9 Revision B:2012 | Cock-Valve, Plug, Ground Key, Threaded Type, Brass, 125 PSI Steam, NPTF-1 Threads |
| MIL-DTL-24127 Revision A:2016 | EDUCTORS, GASOLINE, OIL, OR WATER |
| WW-C-633 Revision D:1980 | COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
| A-A-59440-14 Base Document:2012 | Valve, Flapper, Check-Swing, Water |
| ANSI/AWWA C702 : 2015 | COLD-WATER METERS - COMPOUND TYPE |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| AWWA C701 : 2015 | COLD-WATER METERS - TURBINE TYPE, FOR CUSTOMER SERVICE |
| AWWA C518 : 2013 | DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE |
| AWWA E103 : 2015 | HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
| AWWA C703 : 2015 | COLD-WATER METERS - FIRE-SERVICE TYPE |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| ASTM F 1380 : 1995 : REV A | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM F 1245 : 1989 | SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| ASME B31.1 : 2016 | POWER PIPING |
| BS 5150:1990 | Specification for cast iron gate valves |
| BS 1414:1975 | Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| MS51952 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STREET, CLASS 125 |
| ASTM F 956 : 1991 : R2001 | Standard Specification for Bell, Cast, Sound Signalling |
| MIL-P-52405 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER) |
| CSA 6.32 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| A-A-59440-10 Base Document:2012 | Valve, Inline Check-Valve, Water, Oil, and Gas (WOG) |
| A-A-59440-15 Base Document:2012 | Valve, Relief, Angle, Water, Oil, and Gas (WOG) |
| MIL-PRF-20042 Revision F:2015 | FLANGES, PIPE, BRONZE (SILVER BRAZING) |
| MIL-C-11866 Revision C:1980 | CASTINGS, PRECISION, NONFERROUS |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| ASTM F 3226/F3226M : 2016 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| MS14311 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 250 |
| MS14312 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 250 |
| CSA B137 COMPENDIUM : 2017 | THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASTM F 1475 : 1993 | Specification for Dispensing Tanks, 250 Liter Maximum (Withdrawn 1998) |
| ASTM F 998 : 2012 : R2018 | Standard Specification for Centrifugal Pump, Shipboard Use |
| ASTM F 956 : 1991 : R1996 | Standard Specification for Bell, Cast, Sound Signalling |
| AWWA C708 : 2015 | COLD-WATER METERS - MULTIJET TYPE |
| AWWA C562 : 2014 | FABRICATED ALUMINUM SLIDE GATES |
| AWWA C713 : 2015 | COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| AWWA C501 : 1992 | CAST-IRON SLUICE GATES |
| ANSI/AWWA C714 : 2013 | COLD-WATER METERS FOR RESIDENTIAL FIRE SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| ASTM F 2798 : 2009 : R2014 : EDT 1 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 956 : 1991 : R2006 | Standard Specification for Bell, Cast, Sound Signalling |
| AWWA C712 : 2019 | COLD-WATER METERS - SINGLEJET TYPE |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| AWWA C560:2014 | CAST-IRON SLIDE GATES |
| MIL-DTL-15743-8 Revision C:2007 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 838.1 (DPDT), 840.1 (DPDT), AND 851 (TPST) |
| DOD HDBK 270 : 0 | METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| MIL-DTL-15743-5 Revision D:2014 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 827.1 (SPECIAL), 850.1 (TPDT), AND 863 (4PDT) |
| MIL-PRF-12125 Revision H:2011 | VALVE, GATE: QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
| MIL-PRF-24176 Revision C:2004 | CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC) |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-DTL-15743-7 Revision C:2007 | SWITCH, ROTARY, ENCLOSED, SPLASHPROOF, SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOL 814 (DPST) |
| MIL-S-24660 Base Document:1985 | Sprinkler Head, 180 Degrees Full Cone |
| MIL-DTL-1183 Revision K:2016 | Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification for |
| MS14310 Revision D:2015 | CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125 |
| MIL-DTL-3155 Revision D:2013 | Valve, Temperature-Regulating Ventilation Heater, Steam Control, Naval Shipboard Use |
| ANSI/AWWA C710 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE |
| ASTM F 1510 : 2007 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| MSS SP 131 : 2017 | METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES |
| MIL-A-17204 Revision D:1982 | ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD |
| WW-C-621 Revision G:1990 | COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED) |
| MS14315 Revision D:2015 | BUSHINGS, PIPE, BRASS OR BRONZE, THREADED (OUTSIDE HEAD, INSIDE HEAD, AND FACE) CLASS 250 |
| MIL-DTL-29210-1 Base Document:2010 | HOSE ASSEMBLY, IRON, BRASS, AND CRES CONNECTORS, RUBBER, METAL LINED, WIRE REINFORCED, .750 AND 1.00 INCH HOSE, 250 PSIG, SATURATED STEAM SERVICE |
| AWWA C520 : 2014 | KNIFE GATE VALVES, SIZES 2 IN. (50 MM) THROUGH 96 IN. (2,400 MM) |
| WW-P-460 Revision F:2015 | PIPE FITTINGS; BRASS OR BRONZE (THREADED), CLASSES 125 AND 250 POUND |
| MS14307 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEGREE, STREET, CLASS 125 |
| MIL C 11053 : F | COUPLING ASSEMBLIES, HOSE (CHEMICAL, 3/4 AND 1-INCH) |
| MS14306 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (REDUCERS, CLOSE AND OPEN RETURN BENDS, AND 45-DEGREE Y-BRANCHES), CLASS 125 |
| MSS SP 129 : 2014 | COPPER-NICKEL SOCKET-WELDING, FITTINGS, AND UNIONS |
| A-A-59440-16 Base Document:2012 | Valve, Angle, Shutoff, Water, Oil, and Gas (WOG) |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| MIL V 18500 : B | VALVE, REDUCING, COMPRESSED GAS |
| MIL-DTL-17840 Revision D:2018 | Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application) |
| MSS SP 107 : 1991 | TRANSITION UNION FITTINGS FOR JOINING METAL AND PLASTIC PRODUCTS |
| MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
| ASTM F 1974:2009 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| AWWA C563 : 2014 | FABRICATED COMPOSITE SLIDE GATES |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| AWWA C712 : 2015 | COLD-WATER METERS - SINGLEJET TYPE |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM F 1987 : 2001 : R2011 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020) |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| MIL-DTL-17901 Revision C:2005 | Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
| MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
| MIL-PRF-43001 Revision G:2016 | WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| MIL-DTL-24227 Revision A:2018 | Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| MIL-B-18558 Revision B:1988 | Bearing, Propulsion Line Shaft, Oil Disc Lubricated |
| MIL-DTL-24044 Revision C:2013 | FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL C 52404 : B | CONNECTIONS: HOSE, FIRE AND WATER |
| A-A-2622 Revision A:1998 | ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING |
| AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
| AWWA C513 : 2005 | OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES |
| MIL-DTL-3390 Revision H:2011 | RINGS, DEE |
| AWWA C700 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE |
| MIL-DTL-1189 Revision E:2018 | VALVE, GATE, BRONZE |
| MIL-DTL-17505 Revision G:2014 | Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge |
| WW-T-696 Revision E:1984 | TRAPS, STEAM |
| A-A-59553 Revision A:2012 | COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| MIL-T-11372 Revision F:1991 | TRIVET, SURVEYING INSTRUMENT |
| SAE J462_201801 | CAST COPPER ALLOYS |
| MIL-DTL-15743-4 Revision C:2007 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 805.1 (4PST), 857 (TPDT) |
| A-A-59440-6 Revision B:2012 | Cock-Valve, Plug, Three-Way, Threaded Type, Brass, 125 PSI, NPTF-1 Threads, Water, Oil and Gas (WOG) |
| MIL-DTL-15743-1 Revision C:2007 | SWITCH, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOL 801.1 (DPST) |
| MS51845 Revision E:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STRAIGHT, CLASS 125 |
| CSA B79 : 2008 : R2013 | COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
| B79-08 (R2018) | Commercial and residential drains and cleanouts |
| CSA B 79 : 2008 | COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM F 1986 : 2001 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASTM F 1987 : 2001 : R2006 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNI EN ISO 4126-2 : 2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASTM E 310 : 2015 : REDLINE | Standard Reference Radiographs for Tin Bronze Castings |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| CSA/ANSI LC 4 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
| CSA/ANSI LC 4:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASME A112.6.1M : 1997 : R2008 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME A112.6.1M : 1997 : R2012 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME A112.6.1M : 1997 : R2002 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME A112.14.1 : 2003 | BACKWATER VALVES |
| CSA/ANSI LC 4-2012 (R2017)/CSA 6.32-2012 (R2016) | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASME A112.14.1 : 2003 : R2008 | BACKWATER VALVES |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
| ASME B16.51 : 2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME B16.23 : 2016 | CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
| ASME A112.6.3 : 2016 | FLOOR AND TRENCH DRAINS |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME A112.14.1 : 2003 : R2017 | BACKWATER VALVES |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASME A112.14.1 : 2003 : R2012 | BACKWATER VALVES |
| ASME A112.6.1M : 1997 : R2017 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASTM B 66 : 2015 : REDLINE | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM B 770 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications |
| ASTM B 208 : 2014 : REDLINE | Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM B 806 : 2014 : REDLINE | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM B 22/B22M : 2017 : REDLINE | Standard Specification for Bronze Castings for Bridges and Turntables |
| ASTM B 846 : 2011-07 | TERMINOLOGY FOR COPPER AND COPPER ALLOYS |
| ASTM B 67 : 2014 : REDLINE | Standard Specification for Car and Tender Journal Bearings, Lined |
| ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.