ASTM B 320 : 1960 : R2019
Current
The latest, up-to-date edition.
Standard Practice for Preparation of Iron Castings for Electroplating
Hardcopy , PDF
English
01-04-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice is intended to assist electroplaters in establishing and maintaining a satisfactory pre-electroplating cycle for malleable iron, gray iron, nodular iron, and white iron castings.
| Committee |
B 08
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice is intended to assist electroplaters in establishing and maintaining a satisfactory pre-electroplating cycle for malleable iron, gray iron, nodular iron, and white iron castings. It is also intended to indicate certain foundry practices which will facilitate subsequent finishing. Most of the practices that follow have been based on experience with malleable and gray iron. However, since they are related to the other forms, the same practices will probably apply. Nodular iron is also known as spheroidal or ductile iron, which is defined as cast iron with the graphite substantially in spherical shape and substantially free of flake graphite.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 2.1.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 177/B177M : 2011 : R2017 | Standard Guide for Engineering Chromium Electroplating |
| BS ISO 12686:1999 | Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| ASTM B 734 : 1997 : R2008 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 689 : 1997 : R2003 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 689 : 1997 : R2013 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 456 : 2017 : REDLINE | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASTM B 851 : 2004 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM B 699 : 1986 : R2008 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM A 1074 : 2011 : R2015 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM B 841 : 1999 : R2010 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 999 : 2015 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM B 842 : 1999 : R2011 | Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 734 : 1997 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 816 : 2000 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 699 : 1986 : R1998 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 842 : 1999 : R2005 | Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 650 : 1995 : R2002 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 766 : 1986 : R1998 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 699 : 1986 : R2015 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 851 : 2004 : R2009 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM B 734 : 1997 : R2013 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 904 : 2000 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM B 905 : 2000 : R2010 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM B 177 : 2001 : R2006 : EDT 1 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 650 : 1995 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 200 : 1985 : R2004 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 177/B177M : 2011 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 650 : 1995 : R2013 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 905 : 2000 : R2016 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM B 766 : 1986 : R2003 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 699 : 1986 : R2003 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 904 : 2000 : R2004 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM B 200 : 1985 : R2009 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 841 :1999 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 842 : 1999 : R2016 | Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits |
| ASTM B 177 : 2001 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 840 : 2015 : REDLINE | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| ASTM B 816 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 650 : 1995 : R2008 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 689 : 1997 : R2008 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 200 : 1985 : R2015 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 816 : 2000 : R2009 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 200 : 1985 : R1999 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 905:2000 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM B 841 : 1999 : R2004 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 842 : 1999 | Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 766 : 1986 : R2015 | Standard Specification for Electrodeposited Coatings of Cadmium |
| SAE J 447 : 2016 | PREVENTION OF CORROSION OF MOTOR VEHICLE BODY AND CHASSIS COMPONENTS |
| ASTM B 905 : 2000 : R2005 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM B 766 : 1986 : R2008 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 851 : 2004 : R2014 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM B 689 : 1997 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 816 : 2000 : R2004 : EDT 1 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 994/B994M : 2015 | Standard Specification for Nickel-Cobalt Alloy Coating |
| ASTM B 904 : 2000 : R2009 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM A 1074 : 2011 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM B 734 : 1997 : R2003 : EDT 1 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 904 : 2000 : R2014 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.