ASTM A 902 : 2018 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Metallic Coated Steel Products
Available format(s)
Hardcopy , PDF
Superseded date
03-12-2023
Superseded by
Language(s)
English
Published date
10-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied.
| Committee |
A 05
|
| DocumentType |
Reference Material
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included.
1.2When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term.
1.3Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization.
1.4A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 460 : 2011 : R2021 | Standard Specification for Copper-Clad Steel Wire Strand |
| ASTM A 975 : 2021 | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM F 2453/F2453M : 2014 : R2019 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.<sup>2</sup> [3871 mm<sup>2</sup>] or Less, in Panels or Rolls, with Uniform Meshes |
| ASTM A 979/A979M : 2003(R2019) | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
| ASTM A 998/A998M : 2018 | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications |
| ASTM A 1003/A1003M : 2015 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM A 796/A796M : 2021 | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
| ASTM A 463/A463M : 2022 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
| ASTM A 798/A798M : 2022 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
| ASTM A 807/A807M : 2019 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| ASTM A 929/A929M : 2018 | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM A 1007 : 2022 | Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM A 1046/A1046M : 2022 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 792/A792M : 2022 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM A 817 : 2012 : R2017 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| ASTM A 761/A761M : 2018 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM A 475 : 2022 | Standard Specification for Metallic-Coated Steel Wire Strand |
| ASTM A 123/A123M : 2017 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM F 2919/F2919M : 2012 : R2018 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels |
| ASTM A 1087/A1087M : 2021 | Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet |
| ASTM A 121 : 2022 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 1004/A1004M : 1999 : R2018 | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM A 810 : 2001 : R2019 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
| ASTM A 855/A855M : 2003 : R2020 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
| ASTM A 875/A875M : 2022 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| ASTM A 586 : 2018 | Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand |
| ASTM A 917 : 2008 : R2020 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
| ASTM A 1079 : 2017 : R2023 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM A 780/A780M : 2020 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| ASTM A 1076/A1076M : 2020 | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel |
| ASTM A 603 : 2019 | Standard Specification for Metallic-Coated Steel Structural Wire Rope |
| ASTM A 1122/A1122M : 2022 | Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion |
| ASTM A 390 : 2006 : R2021 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 964/A964M : 2023 | Standard Specification for Corrugated Steel Box Culverts |
| ASTM A 153/A153M : 2023 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM A 653/A653M : 2023 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM A 116 : 2022 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| ASTM A 1057/A1057M : 2008 : R2019 | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process |
| ASTM A 1072/A1072M : 2011 : R2020 | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products |
| ASTM A 925 : 2003 : R2020 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
| ASTM A 459 : 2008 : R2020 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
| ASTM A 974 : 1997 : R2021 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM A 1063/A1063M : 2022 | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process |
| ASTM A 640 : 1997 : R2019 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
| ASTM A 1073/A1073M : 2021 | Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet |
| ASTM A 754/A754M : 2021 | Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence |
| ASTM B 1022 : 2022 | Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process |
| ASTM A 856/A856M : 2003 : R2020 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 741 : 2011 : R2016 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| ASTM A 111 : 1999 : REV A : R2020 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire |
| ASTM A 1074 : 2011 : R2020 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM A 1059/A1059M : 2018 | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products |
| ASTM A 1108 : 2017 : R2022 | Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams |
| ASTM A 824 : 2001 : R2022 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM A 363 : 2003 : R2020 : EDT 1 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| ASTM D 6386 : 2022 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM A 924/A924M : 2022 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM A 924/A924M : 2020 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM D 6386 : 2016 : REV A | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM A 924/A924M : 2022 : REV A | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM D 6386 : 2016 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 7396 : 2014 | Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting |
| ASTM D 6386 : 1999 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 7396 : 2007 | Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting |
| ASTM D 7396 : 2008 | Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting |
| ASTM B 374 : 2006 : R2019 | Standard Terminology Relating to Electroplating |
| ASTM D 6386 : 2010 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM A 924/A924M : 2009 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM B 374 : 2021 | Standard Terminology Relating to Electroplating |
| ASTM D 7396 : 2014 : R2020 | Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.