Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM A 90/A90M : 2021

Current

Current

The latest, up-to-date edition.

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

17-05-2021

$103.13
Including GST where applicable

Committee
A 05
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This test method covers procedures for determining the weight [mass] of coating on iron or steel sheet, wire, and other articles in which the coating is zinc or a zinc alloy, such as zinc-5 % aluminum (including zinc-5 % aluminum-mischmetal and zinc-5 % aluminum-0.1 % magnesium), zinc-aluminum-magnesium (including zinc-5 to 9 % aluminum-magnesium and zinc-9 to 13 % aluminum-magnesium) or 55 % aluminum-zinc. In the body of this test method, reference to zinc coating shall be interpreted to also include zinc alloy coating except where specifically stated otherwise.

1.2Units—The final results determined by this test method shall be expressed in inch-pound units or SI units, depending on the units used in the material specification to which the results are to be compared. Certain portions of the procedure involving determination of specimen weight [mass] have traditionally been performed in SI units, and corresponding inch-pound units are not included.

1.3For sheet products, the final results are expressed as either coating weight [mass] total both sides, or coating weight [mass] separately on each side, depending on the specified requirements.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see 5.1.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F 1043 : 2018 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
ASTM A 1076/A1076M : 2020 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
ASTM A 603 : 2019 Standard Specification for Metallic-Coated Steel Structural Wire Rope
ASTM A 760/A760M : 2015 : R2020 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM A 390 : 2006 : R2021 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
ASTM G 198 : 2017 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
ASTM A 974 : 1997 : R2016 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ASTM B 802/B802M : 2019 Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM A 475 : 2003 : R2020 Standard Specification for Zinc-Coated Steel Wire Strand
ASTM F 668 : 2017 Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
ASTM A 1057/A1057M : 2008 : R2019 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A 641/A641M : 2019 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
ASTM A 1072/A1072M : 2011 : R2020 Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
ASTM A 925 : 2003 : R2020 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A 459 : 2008 : R2020 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
ASTM A 740 : 2021 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
ASTM A 1093/A1093M : 2015 : R2020 : EDT 1 Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
ASTM A 640 : 1997 : R2019 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
ASTM A 121 : 2019 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A 1063/A1063M : 2021 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A 792/A792M : 2021 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM F 2453/F2453M : 2014 : R2019 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.<sup>2</sup>  [3871 mm<sup>2</sup>] or Less, in Panels or Rolls, with Uniform Meshes
ASTM A 53/A53M : 2020 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A 653/A653M : 2020 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM F 680 : 2020 Standard Test Methods for Nails
ASTM A 854/A854M : 2008 : R2017 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM A 1007 : 2015 Standard Specification for Carbon Steel Wire for Wire Rope
ASTM A 741 : 2011 : R2016 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
ASTM A 111 : 1999 : REV A : R2020 Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
ASTM A 1059/A1059M : 2018 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
ASTM A 795/A795M : 2021 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
ASTM A 363 : 2003 : R2020 : EDT 1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
ASTM A 392 : 2011 : REV A : R2017 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
ASTM A 856/A856M : 2003 : R2020 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM F 1665 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM A 875/A875M : 2013 : R2021 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM B 957/B957M : 2019 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
ASTM F 1083 : 2018 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
ASTM A 123/A123M : 2017 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM F 2919/F2919M : 2012 : R2018 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels
ASTM B 803/B803M : 2019 Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM F 1345 : 2010 : REV A : R2019 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM A 879/A879M : 2012 : R2017 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A 767/A767M : 2019 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
ASTM F 1664 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM A 153/A153M : 2016 : REV A Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A 975 : 2020 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM A 810 : 2001 : R2019 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
ASTM B 606/B606M : 2019 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM A 411 : 2008 : R2017 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
ASTM B 767 : 1988 : R2016 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM A 924/A924M : 2020 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A 929/A929M : 2018 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
ASTM A 1094/A1094M : 2020 Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
ASTM A 817 : 2012 : R2017 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
ASTM A 1046/A1046M : 2019 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 761/A761M : 2018 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM E 3 : 2011 : R2017 Standard Guide for Preparation of Metallographic Specimens
ASTM A 764 : 2007 : R2017 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A 855/A855M : 2003 : R2020 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
ASTM A 762/A762M : 2019 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
ASTM B 498/B498M : 2019 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
ASTM A 586 : 2018 Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
ASTM G 33 : 1999 : R2020 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM B 958/B958M : 2019 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM A 917 : 2008 : R2020 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A 1060/A1060M : 2016 : REV B Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A 116 : 2011 : R2016 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
ASTM A 1079 : 2017 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

ASTM A 1063/A1063M : 2021 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM A 653/A653M : 2023 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A 653/A653M : 2022 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A 1079 : 2017 : R2023 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A 875/A875M : 2013 : R2021 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 792/A792M : 2022 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 875/A875M : 2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 875/A875M : 2022 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 1046/A1046M : 2024 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 1046/A1046M : 2022 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 1046/A1046M : 2023 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 792/A792M : 2023 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 875/A875M : 2021 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 792/A792M : 2021 : REV A Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 792/A792M : 2021 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 1063/A1063M : 2022 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A 1046/A1046M : 2019 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more