ASTM A 493 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
Available format(s)
PDF
Language(s)
English
Published date
10-03-2016
Superseded date
09-11-2023
Superseded by
$122.78
Including GST where applicable
CONTAINED IN VOL. 01.03, 2017 Defines cold-finished and hot-finished stainless steel wire and wire rods for cold heading or cold forging for applications, such as fasteners, where corrosion resistance is a factor.
| Committee |
A 01
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification covers cold-finished and hot-finished stainless steel wire and wire rods for cold heading or cold forging for applications, such as fasteners, where corrosion resistance is a factor.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
| MIL-DTL-5423-14 Revision G:2009 | Boot, Dust and Water Seal, Type D (for Lever Operated Circuit Breakers), Style 2 (Panel Mounted Complete with Mounting Frame) |
| ASTM C 923 : 2008 : R2013 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
| ASTM F 2946 : 2012 : R2017 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
| ASTM C 923 : 2008 : R2013 : EDT 1 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
| ASTM F 594 : 2009 | Standard Specification for Stainless Steel Nuts |
| MIL-N-45938 Revision A:1995 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, GENERAL SPECIFICATION FOR (S/S BY NASM45938) |
| MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR (S/S BY NASM21472) |
| MIL-S-63540 Revision C:1995 | STUD, SELF-CLINCHING, GENERAL SPECIFICATION FOR (S/S BY NASM63540) |
| MIL-P-21143 Revision B:1984 | Pin, Straight, Headless (Dowel) General Specification for (S/S by NASM21143) |
| OO-K-220 Revision C:2015 | Key, Machine |
| MIL-DTL-28748-17 Revision B:2016 | Connectors, Electrical, Rectangular, Rack and Panel, Hardware for |
| MIL-S-82496 Revision A:1977 | Screws, Machine, Self Sealing, Integral O-Ring (S/S by NASM82496) |
| ASTM C 1173 : 2018 : REDLINE | Standard Specification for Flexible Transition Couplings for Underground Piping Systems |
| ASTM C 1478M : 2008 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
| ASTM A 762/A762M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
| ASTM F 594 : 2009 : R2015 | Standard Specification for Stainless Steel Nuts |
| ASTM C 923M : 2008 : REV B : R2013 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
| ASTM C 1478 : 2008 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
| ASTM F 2510/F2510M : 2017 : REDLINE | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
| NASA SSTD 8070 0035 : 2013 | ASME PROCEDURE FOR WELDING MONEL ALLOY TO STAINLESS STEEL |
| ASTM C 1478 : 2008 : R2013 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
| ACI 303.1 : 1997 | STANDARD SPECIFICATION FOR CAST-IN-PLACE ARCHITECTURAL CONCRETE |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
| MIL-DTL-24308-25 Revision K:2008 | Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Male |
| ASTM F 2281 : 2004 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| AWWA C708 : 2015 | COLD-WATER METERS - MULTIJET TYPE |
| AWWA C713 : 2015 | COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| ASTM F 2281 : 2004 : R2017 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM C 1478M : 2008 : REV A | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
| AWWA C712 : 2019 | COLD-WATER METERS - SINGLEJET TYPE |
| NASA SSTD 8070 0038 : 2013 | ASME PROCEDURE FOR WELDING NITRONIC 40 STAINLESS STEEL ALLOY TO AUSTENITIC STAINLESS STEEL |
| DOD HDBK 270 : 0 | METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| MIL-HDBK-270 Revision A:1991 | Metallic Materials for Low Magnetic Applications, Magnetic Permeability and Electrical Conductivity, Characteristics of (Metric) |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| ASTM C 1460 : 2012-12 | SPECIFICATION FOR SHIELDED TRANSITION COUPLINGS FOR USE WITH DISSIMILAR DWV PIPE AND FITTINGS ABOVE GROUND |
| ANSI/AWWA C710 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE |
| MIL-DTL-5423-13 Revision D:2009 | Boot, Dust and Water Seal, Type D (for Lever Operated Circuit Breakers), Style 1 (Panel Mounted Without Mounting Frame) |
| ASTM C 1540 : 2018 : REDLINE | Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| MIL-DTL-21617-29 Base Document:2003 | Connector, Receptacle Electrical, Rectangular, Polarized Shell, Miniature Type, Back Shells |
| AWWA C712 : 2015 | COLD-WATER METERS - SINGLEJET TYPE |
| ASTM C 923M : 200 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
| ASTM C 923M : 2008 | SPECIFICATION FOR RESILIENT CONNECTORS BETWEEN REINFORCED CONCRETE MANHOLE STRUCTURES, PIPES, AND LATERALS [METRIC] |
| ASTM C 923M : 2008 : REV B | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
| ASTM F 594 : 2009 : EDT 1 | Standard Specification for Stainless Steel Nuts |
| ASTM C 1541 : 2012 | Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings |
| AWWA C700 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE |
| MIL-R-24243 Revision C:1987 | RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR |
| ASTM F 2281 : 2004 : R2012 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| AASHTO M 245 : 2000 | SPECIFICATION FOR CORRUGATED STEEL PIPE, POLYMER-PRECOATED, FOR SEWERS AND DRAINS |
| ASTM C 1541 : 2012 : R2017 | Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings (Withdrawn 2022) |
| ASTM C 923 : 2008 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
| ASTM F 2946 :2012 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM C 923M : 2008 : REV A | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
| ASTM C 1478M : 2008 : REV A : R2013 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
| ASME B18.30.1M : 2000 : R2010 | OPEN-END BLIND RIVETS WITH BREAK MANDRELS (METRIC SERIES) |
| ASME B18.30.1M : 2000 : R2005 | OPEN-END BLIND RIVETS WITH BREAK MANDRELS (METRIC SERIES) |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.