ASME PV CODE SET : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BOILER AND PRESSURE VESSEL CODE - COMPLETE SET
Superseded date
21-03-2020
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
| DevelopmentNote |
Complete BVPC without binders. (04/2013) Pre-Order 2017 Edition. 2017 Edition will be available by first week of July. 2015 Edition is still available. (12/2016) Also available with Binders. (01/2017)
|
| DocumentType |
Standard
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| UFC 3-401-01 : Change 1 | UNIFIED FACILITIES CRITERIA - MECHANICAL ENGINEERING |
| NACE 5A171 : 2007 | MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ASME CSD1 : 2012 | CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS |
| AAMI ST24:1999(R2018) | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
| AAMI ST24 : 1999 : R2013 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
| CSA B140.12 : 2003 : R2013 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| CSA C22.2 No. 104 : 2011 : R2015 | HUMIDIFIERS |
| ASTM F 1076 : 1987 : R1997 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ASTM A 723/A723M : 2010 : R2015 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| CSA B140.7 : 2005 : R2010 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| ANSI/AAMI ST8:2013(R2018) | HOSPITAL STEAM STERILIZERS |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| UFC 1-202-01 : 2013 | UNIFIED FACILITIES CRITERIA - HOST NATION FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| ASTM F 1076 : 1987 | PRACTICE FOR EXPANDED WELDED AND SILVER BRAZED SOCKET JOINTS FOR PIPE AND TUBE |
| CSA N289.1 : 2008 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| CSA/ANSI Z21.40.1 : 1996 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| ASTM A 757/A757M : 2015 : REDLINE | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
| N285.0-17/N285.6 SERIES-17 | General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| ASTM A 765/A765M : 2007 : R2017 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| AWS WHC2.08 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 8: ELECTROGAS WELDING |
| UFC 4-826-10 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
| ASTM F 1076 : 1987 : R2004 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| CSA C22.2 No. 104:2011 | HUMIDIFIERS |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| CSA/ANSI NGV4.8 : 2012 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| IEC TS 60079-43:2017 | Explosive atmospheres - Part 43: Equipment in adverse service conditions |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| C22.2 NO. 165-17 | Electric boilers |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| ASTM A 765/A765M : 2007 : R2012 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
| CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| NFPA 68 : 2018 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| CSA Z245-12 : 2017 | STEEL FLANGES |
| CSA M424.1 : 2016 | FLAMEPROOF NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN GASSY UNDERGROUND COAL MINES |
| ACI 351.2R : 2010 | REPORT ON FOUNDATIONS FOR STATIC EQUIPMENT |
| NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| ASTM F 2509 : 2015-12 | SPECIFICATION FOR FIELD-ASSEMBLED ANODELESS RISER KITS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE AND TUBING |
| AAMI ST24 : 1999 : R2009 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
| CSA/ANSI NGV4.8 : 2012 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| CSA/ANSI NGV4.8 :2012 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| BS EN ISO 15551-1:2015 | Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
| BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
| CSA B140.12:2003 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
| BIS IS 2825 : 1969(R2017) | CODE FOR UNFIRED PRESSURE VESSELS |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 87 : 2018 | FLUID HEATERS |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ISO/PAS 15594:2004 | Airport hydrogen fuelling facility operations |
| CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
| ASTM A 372/A372M : 2016 : REDLINE | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| ASTM F 1076 : 1987 : R2010 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ASTM A 1049/A1049M : 2010 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
| CSA M424.2 : 2016 | NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN NON-GASSY UNDERGROUND MINES |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| ASTM B 369 : 2009 : R2016 | Standard Specification for Copper-Nickel Alloy Castings |
| ASTM F 1076 : 1987 : R2015 : EDT 1 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
| EN ISO 15551-1:2015 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
| CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 414 : 2017 | AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES |
| ASTM A 1049/A1049M : 2010 : R2015 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| AWS WHC4.09 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 9: MAINTENANCE AND REPAIR WELDING |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| API RP 75:2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| ANSI/AAMI ST55:2016 | TABLE-TOP STEAM STERILIZERS |
| Z245.15-17 | Steel valves |
| CSA/ANSI Z21.40.1 : 1996 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| AAMI ST24 : 1999 : R2005 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
| ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 | 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
| AWS WHC4.08 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 8: CAST IRONS |
| ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
| ASTM F 1973 : 2013 : R2018 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| ASTM B 369 : 2009 | Standard Specification for Copper-Nickel Alloy Castings |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM A 723/A723M : 2010 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| NACE SP 01 78 : 2007 | DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE |
| ASTM A 765/A765M : 2007 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| CSA B140.7:2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| CSA B625 : 2013 | PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| API 75 : 2019 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| CSA B140.7 : 2005 : R2010 : FR | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| CSA/ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| ASTM B 395/B395M : 2018 : REDLINE | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 | HUMIDIFIERS |
| IEEE 317-2013 REDLINE | IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ISO 21028-2:2018 | Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C |
| CAN/CSA-Z767-17 | Process safety management |
| MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
| ASTM F 1973 : 2013 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| CSA N285.8 : 2015 | TECHNICAL REQUIREMENTS FOR IN-SERVICE EVALUATION OF ZIRCONIUM ALLOY PRESSURE TUBES IN CANDU REACTORS |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
| ASTM E 2542 : 2008 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| CSA C22.2 No. 60335-2-89 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR |
| ASTM E 2542 : 2008 : R2014 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
| CSA Z245.1 : 2014 | STEEL PIPE |
| CSA C22.2 No. 140.3 : 2015 | REFRIGERANT-CONTAINING COMPONENTS FOR USE IN ELECTRICAL EQUIPMENT |
| ASTM F 1973 : 2013 : EDT 1 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| CSA/ANSI NGV 4.1-2018 | Natural gas vehicle (NGV) dispensing systems |
| API 75 : 2004 : R2013 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| CSA B140.7 : 2005 : R2014 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| API 75L : 2007 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ASME STP-PT-007 : 2006 | Comparison of Pressure Vessel Codes: ASME Section VIII & EN13445 (Technical, Commercial, & Usage Comparison Design Fatigue Life Comparison) (STP-PT-007 - 2006)<br> |
| ANSI B11.5 : 1988 | IRONWORKERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
| ASME PVHO 2 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES |
| IEEE 1277-2010 | IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission |
| CSA/ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| NASA JSC 08080-2 : 2015 | JSC DESIGN AND PROCEDURAL STANDARDS |
| API RP 75 CHINESE : 2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| CSA Z245-11 : 2017 | STEEL FITTINGS |
| CSA/ANSI Z21-10-3 : 2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| CSA/ANSI NGV2 : 2016 | COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS |
| API 75 CHINESE : 2004 : R2008 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 5C7 : 1996 : R2007 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
| I.S. EN ISO 15551-1:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
| ANSI B11.7 : 1995 | COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
| API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| NASA SSTD 8070 0097 : 2014 | RELIEF DEVICES - INSPECTION AND RECERTIFICATION |
| API 5C7:1996 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
| ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| PD IEC/TS 60079-43:2017 | Explosive atmospheres Equipment in adverse service conditions |
| API 75L : 2007 : R2013 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.