ASME B18.24 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS
Hardcopy , PDF
29-12-2020
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committee Roster
Correspondence With the B18 Committee
1 Introductory Notes
2 General Guidance
3 PIN Code Structure
Nonmandatory Appendices
A - B18.24.1, B18.24.2, and B18.24.3 PIN
Succession Instructions
B - B18.24.1, B18.24.2, and B18.24.3 PIN
Succession Tables
C - Part Identifying Number System for Bent
Bolts per ASME B18.31.5
Gives all users (manufacturers, distributors, design and configuration, parts control, inventory control, test and maintenance functions) with the capability to identify externally threaded, internally threaded, and nonthreaded fastener products by a preselected order of coding as specified herein.
| DevelopmentNote |
Supersedes and redesignates ASME B18.24.1, ASME B18.24.2 & ASME B18.24.3 (07/2005)
|
| DocumentType |
Standard
|
| ISBN |
9780791870174
|
| Pages |
186
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 2882 : 2012 | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength |
| ASTM F 2882M : 2012 | Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric] (Withdrawn 2017) |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| ASTM F 541 : 2012 : REDLINE | Standard Specification for Alloy Steel Eyebolts |
| ASME B18.21.3 : 2008 | DOUBLE COIL HELICAL SPRING LOCK WASHERS FOR WOOD STRUCTURES |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASME B18.21.3 : 2008 : R2013 | DOUBLE COIL HELICAL SPRING LOCK WASHERS FOR WOOD STRUCTURES |
| ASTM A 394 : 2008 : EDT 1 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASME B18.6.8 : 2010 : R2017 | THUMB SCREWS AND WING SCREWS (INCH SERIES) |
| ASTM F 844 : 2007 : REV A | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| ASTM F 2882/F2882M : 2017 : REDLINE | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) |
| ASTM A 394 : 2008 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM F 844 : 2007 : REV A : R2013 | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| ASME B18.7 : 2007 : R2017 | GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS |
| ASME B18.7 : 2007 | GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| MIL-DTL-83513-5 Revision H:2007 | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE |
| ASTM F 912 : 2011 | Standard Specification for Alloy Steel Socket Set Screws |
| ASTM F 912 : 2011 : R2017 | Standard Specification for Alloy Steel Socket Set Screws |
| ASME B18.7 : 2007 : R2012 | GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS |
| ASME B18.6.8:2010 | THUMB SCREWS AND WING SCREWS (INCH SERIES) |
| ASTM A 394 : 2008 : R2015 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASME B18.16M : 2004 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
| ASME B18.16M : 2004 : R2009 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
| ASME B18.2.6 : 2010 | FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| ASME B18.9 : 2012 : R2017 | PLOW BOLTS |
| ASME B18.2.4.5M : 2008 | METRIC HEX JAM NUTS |
| ASM E B18.21.1 : 2009 | WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES) |
| ASME B18.2.3.3M : 2007 : R2014 | METRIC HEAVY HEX SCREWS |
| ASME B18.5.2.1M :2006 | METRIC ROUND HEAD SHORT SQUARE NECK BOLTS |
| ASME B18.5.2.1M : 2006 : R2011 | METRIC ROUND HEAD SHORT SQUARE NECK BOLTS |
| ASME B18.13.1M : 2011 : R2016 | SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES) |
| ASME B18.13.1M : 2011 | SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES) |
| ASME B18.16M : 2004 : R2016 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
| ASME B18.29.2M:2005 | HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES) |
| ASME B18.29.2M : 2005 : R2017 | HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES) |
| ASME B18.2.3.3M : 2007 | METRIC HEAVY HEX SCREWS |
| ASME B18.2.6M : 2012 | METRIC FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| ASME B18.2.5M : 2013 | METRIC 12-POINT FLANGE HEAD SCREWS |
| ASME B18.2.4.6M : 2010 | METRIC HEAVY HEX NUTS |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| ASME B18.9 : 2012 | PLOW BOLTS |
| ASME B18.21.1 : 2009 : R2016 | WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.