ASME B16.10 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
Available format(s)
Hardcopy , PDF
Superseded date
26-07-2022
Superseded by
Language(s)
English
Published date
02-06-2017
Publisher
Foreword
Committee Roster
Correspondence With the B16 Committee
1 Scope
2 Definitions
3 Facings of Flanged Valves
4 Variations of Length Within a Class of Valves
5 Tolerances
Mandatory Appendix
I - Face-to-Face and End-to-End Dimensions: U.S.
Customary Units
Nonmandatory Appendix
A - References
This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves.
| DocumentType |
Standard
|
| ISBN |
9780791871478
|
| Pages |
56
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ISA 75.03 : 1992 | FACE-TO-FACE DIMENSIONS FOR INTEGRAL FLANGED GLOBE-STYLE CONTROL VALVE BODIES (ANSI CLASSES 125, 150, 250, 300 AND 600) |
| BS ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| MSS SP 92 : 2012 | MSS VALVE USER GUIDE |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| DIN EN 558:2017-05 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| BS EN ISO 14723:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
| UNI EN 13942 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| MIL-PRF-13803 Revision F:1996 | VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
| MSS SP 68 : 2017 | HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| API 621 REDLINE : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| ISA 75.16 : 1994 | FACE-TO-FACE DIMENSIONS FOR FLANGED GLOBE-STYLE CONTROL VALVE BODIES (ANSI CLASS 900, 1500, AND 2500) |
| I.S. EN ISO 10434:2004 | BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| I.S. EN 12982:2009 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| I.S. EN ISO 15761:2003 | STEEL GATE, GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER, FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| API 6DSS REDLINE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| ASME B31.1 : 2016 | POWER PIPING |
| MIL V 24569 : 0 | VALVE, QUICK CLOSING, FOR FUEL OIL AND AUXILIARY STEAM EMERGENCY SHUTDOWN |
| BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
| BS EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| API 608 RUSSIAN : 2012 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| DIN EN ISO 10434:2005-01 | BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| DIN EN 16722:2015-12 | INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| BS EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| API 621 : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| BS EN 12982:2009 | Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves |
| ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
| API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| ISA 75.08.06 : 2002 | FACE-TO-FACE DIMENSIONS FOR FLANGED GLOBE-STYLE CONTROL VALVE BODIES (CLASSES 900, 1500, AND 2500) |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| API 591 RUSSIAN : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| API 6DSS CHINESE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| EN 13942:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
| API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
| BS EN ISO 13703 : 2001 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
| API 608 CHINESE : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| API 602 REDLINE : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| API STD 602 : 2015+ERR 1 : 2016 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| BS ISO 18139:2017 | Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
| MSS SP 136 : 2014 | DUCTILE IRON SWING CHECK VALVES |
| BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
| API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| API 600 REDLINE : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| API 594 REDLINE : 2010 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) |
| API 594 RUSSIAN : 2004 | CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
| NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| API 603 RUSSIAN : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
| API 600 CHINESE : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| API 608 REDLINE : 2008 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| ISA 75.08.06 : 2002 : R2007 | FACE-TO-FACE DIMENSIONS FOR FLANGED GLOBE-STYLE CONTROL VALVE BODIES (CLASSES 900, 1500, AND 2500) |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ASME B16.38 : 2012 : R2017 | LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
| API 621 RUSSIAN : 2010 | PIPELINE VALVES - RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| AWWA C500 : 2019 | Metal-Seated Gate Valves for Water Supply Service |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| API 623 : 2013 | STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| MSS SP 71 : 2011 | GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| UNE-EN 12982:2010 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| EN ISO 14723:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
| DIN EN 12982:2009-11 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| ASME B16.38 : 2012 | LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
| ANSI/AWWA E200:2023 | Progressive Cavity Chemical Metering Pumps |
| ISO 18139:2017 | Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
| ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
| API 602 RUSSIAN : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
| MSS SP 70 : 2011 | GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
| I.S. EN 558:2017 | INDUSTRIAL VALVES - FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS OF METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - PN AND CLASS DESIGNATED VALVES |
| I.S. EN ISO 14723:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
| MSS SP 131 : 2017 | METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES |
| ASME B31.3:2016 | PROCESS PIPING |
| MSS SP 128 : 2012 | DUCTILE IRON GATE VALVES |
| MSS SP 85 : 2011 | GRAY IRON GLOBE & ANGLE VALVES, FLANGED AND THREADED ENDS |
| ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
| MSS SP 72 : 2010 | BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE |
| MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| MSS SP 141 : 2012 | MULTI-TURN AND CHECK VALVE MODIFICATIONS |
| API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| API 591 REDLINE : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| API 600 RUSSIAN : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| UNE-EN 558:2008 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| BS 2080:1989 | Specification for face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| BS EN 558:2017 | Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves |
| ISA 75.08 : 0 | INSTALLED FACE-TO-FACE DIMENSIONS FOR FLANGED CLAMP OR PINCH VALVES |
| ASTM A 727/A727M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
| MSS SP 135 : 2016 | HIGH PRESSURE KNIFE GATE VALVES |
| AWWA C517 : 2016 | RESILIENT-SEATED CAST-IRON ECCENTRIC PLUG VALVES |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| MSS SP 67 : 2017 | BUTTERFLY VALVES |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| MSS SP 68 : 2017 | HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN |
| MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| AWWA C508 : 2009 | SWING-CHECK VALVES FOR WATERWORKS SERVICE, 2-IN. THROUGH 48-IN. (50-MM THROUGH 1,200-MM) NPS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.