AS/NZS 61000.3.2:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
29-05-2024
Superseded by
Published date
11-09-2007
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Proposes harmonic requirements for equipment with a current input less than or equal to 16 A intended for connection to an electrical network.
| Committee |
EL-034
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8382 1
|
| Pages |
22
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 61000-3-2:2005 | Identical |
Originated in Australia as AS 2279.1-1979.
Jointly revised and redesignated as AS/NZS 61000.3.2:1998.
Previous edition 2003.
Third edition 2007.
| AS/NZS 61000.3.4:2007 | Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018) |
| AS/NZS 61000.2.2:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013) |
| AS/NZS 61000.3.12:2006 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase |
| AS/NZS 61000.4.7:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| AS/NZS 61000.6.3:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
| AS/NZS 4847.2(INT):2008 | Self-ballasted lamps for general lighting services Minimum Energy Performance Standards (MEPS) requirements |
| AS/NZS 61058.1:2008 | Switches for appliances General requirements (IEC 61058-1, Ed. 3.1 (2000), MOD) |
| AS 2703-2008 | Vehicle loop detector sensors |
| TR IEC 61000.1.4:2012 | Electromagnetic compatibility (EMC) General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz |
| AS/NZS ISO 10535:2011 | Hoists for the transfer of disabled persons - Requirements and test methods |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 60745.1:2009 | Hand-held motor-operated electric tools-Safety General requirements (IEC 60745-1 Ed 4, MOD) (Reconfirmed 2020) |
| AS/NZS 61000.4.13:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
| AS/NZS 61000.4.7:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023) |
| AS IEC 62040.3-2012 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| AS/NZS 3200.1.2:2005 | Medical electrical equipment General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 61000.3.3:2012 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
| AS/NZS 4847.1(INT):2008 | Self-ballasted lamps for general lighting services Test methods - Energy performance |
| AS/NZS IEC 61000.3.12:2013 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase |
| AS/NZS 60669.2.1:2013 | Switches for household and similar fixed electrical installations Particular requirements - Electronic switches (IEC 60669-2-1, Ed.4.1 (2009) MOD) |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 4847.1:2010 | Selfballasted lamps for general lighting services Test methods - Energy performance (Reconfirmed 2020) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS/NZS 4847.2:2010 | Self ballasted lamps for general lighting services Minimum Energy Performance Standards (MEPS) requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.