AS/NZS 60079.0:2008
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Explosive atmospheres Equipment - General requirements
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
19-05-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies the general requirements for construction, testing and marking of electrical apparatus, Ex cable glands and Ex components, intended for use in explosive gas atmospheres. This Standard does not specify requirements for safety, other than those directly related to the explosion risk.
| Committee |
EL-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8708 8
|
| Pages |
88
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 60079-0:2007 | Identical |
Originated as AS/NZS 60079.0:2000.
Previous edition 2005.
Third edition 2008.
| AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
| AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
| AS/NZS 61241.10:2005 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
| AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
| AS/NZS 60079.11:2006 | Explosive atmospheres Equipment protection by intrinsic safety 'i' |
| AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
| AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| AS/NZS 62013.1:2001 | Caplights for use in mines susceptible to firedamp General requirements - Construction and testing in relation to the risk of explosion |
| AS/NZS 61241.11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD |
| AS/NZS 61241.14:2005 | Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD) |
| AS 1420-2001 | ISO metric hexagon socket head cap screws |
| AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
| AS/NZS 60079.30.1:2007 | Explosive atmospheres Electrical resistance trace heating - General and testing requirements |
| AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
| AS 3731.2-1995 | Stationary batteries - Nickel-cadmium Valve-regulated type |
| AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
| AS 1683.23-2000 | Methods of test for elastomers Rubber - Vulcanized - Determination of resistance to liquids (Reconfirmed 2018) |
| AS/NZS 60079.10:2004 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD) |
| AS/NZS 61241.1:2005 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
| AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 61241.18:2005 | Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD' |
| AS 1145.2-2001 | Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics |
| AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
| AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
| AS/NZS 61241.4:2002 | Electrical apparatus for use in the presence of combustible dust Type of protection 'pD' |
| AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
| AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
| AS 1359.101-1997 | Rotating electrical machines - General requirements Rating and performance |
| AS 3731.1-1995 | Stationary batteries - Nickel-cadmium Vented type |
| AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
| AS/NZS 60079.4:2000 | Electrical apparatus for explosive gas atmospheres Method of test for ignition temperature |
| AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 60079.27(INT):2006 | Electrical apparatus for explosive gas atmospheres Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO) |
| AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
| AS 1110.2-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Screws |
| AS 4647-2011 | Diaphragm gas meters |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS/NZS 60335.2.11:2009 | Household and similar electrical appliances - Safety Particular requirements for tumble dryers (IEC 60335-2-11 Ed 7.1, MOD) |
| AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS 2865-2009 | Confined spaces |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 3004.2:2008 | Electrical installations - Marinas and recreational boats Recreational boats installations |
| AS/NZS 60079.29.4:2011 | Explosive atmospheres Gas detectors - Performance requirements of open path detectors for flammable gases (Reconfirmed 2022) |
| AS/NZS 60079.0:2012 | Explosive atmospheres Equipment - General requirements |
| HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
| AS/NZS 60079.31:2011 | Explosive atmospheres Equipment dust ignition protection by enclosure 't' |
| AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods (Reconfirmed 2024) |
| AS 4995-2009 | Greywater treatment systems for vessels operated on inland waters |
| MP 87.1:2008 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Product Certification Program - Basic rules and procedures |
| AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
| AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
| AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS 60034.12-2009 | Rotating electrical machines Starting performance of single-speed three-phase cage induction motors |
| AS/NZS 80079.34:2012 | Explosive atmospheres Application of quality systems for equipment manufacture |
| AS/NZS 1826:2008 | Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’ |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.