AS/NZS 4791:2006
Current
The latest, up-to-date edition.
Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
25-07-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces except cut ends, using an in-line process that utilizes specialized equipment.
| Committee |
MT-009
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7643 4
|
| Pages |
17
|
| ProductNote |
Reconfirmed 29/09/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 29/09/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces, using an in-line process that utilizes specialized equipment.Matters relating to the quality, properties, or dimensional requirements of the open sections are outside the scope of this Standard.NOTES:1 Advice and recommendations on information to be supplied by the purchaser to the hot-dip galvanizer at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.3 General information on factors that affect the corrosion of galvanized steel is given in Appendix C.4 For guidance on duplex protection systems below ground refer to Appendix G.5 Electroplated zinc coatings applied to steel strip for manufacture into open sections are not covered by this Standard. The application of this Standard to these coatings is subject to agreement between the purchaser and the supplier.
Originated as AS/NZS 4791:1999.
Second edition 2006.
| AS 2331.3.11-2004 | Methods of test for metallic and related coatings Corrosion and related property tests - Chemical residue tests |
| AS 2505.1-2004 | Metallic materials Sheet, strip and plate - Bend tests |
| AS 2331.2.3-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 2331.2.1-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 2331.1.3-2001 | Methods of test for metallic and related coatings Local thickness tests - Magnetic method (Reconfirmed 2017) |
| AS/NZS 2243.10:2004 | Safety in laboratories Storage of chemicals |
| AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
| AS 2331.1.4-2001 | Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 2243.2:2006 | Safety in laboratories Chemical aspects |
| AS 1684.3-2010 | Residential timber-framed construction Cyclonic areas |
| AS 1684.4-2010 | Residential timber-framed construction Simplified - Non-Cyclonic Areas |
| AS/NZS 2311:2009 | Guide to the painting of buildings |
| AS 1684.2-2010 | Residential timber-framed construction Non-cyclonic areas |
| AS 1657-2013 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 3700:2018 | Masonry Structures |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
| AS 1657:2018 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS/NZS 2311:2017 | Guide to the Painting of Buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.