Preview

Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

30-08-2006

Publisher

Standards Australia

Preview

$119.17

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Specifies requirements and tests for hot-dip zinc coatings on fabrications, assembled steel products, tubular fabrications, fabricated wire work, steel forgings, steel stampings, ferrous castings, nails and small components.

Committee	MT-009
DocumentType	Standard
ISBN	0 7337 7697 3
Pages	23
ProductNote	Reconfirmed 29/09/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 29/09/2017
PublisherName	Standards Australia
Status	Current
Supersedes	DR 05584 AS/NZS 4680:1999

This Standard specifies requirements and tests for hot-dip zinc coatings on fabricated ferrous articles including structural steel, steel reinforcements, steel sheet fabrications, assembled steel products, tubular fabrications, fabricated wire work, steel forgings, steel stampings, ferrous castings, nails and other small components. This Standard applies to both centrifuged and non-centrifuged articles.This Standard does not apply to products such as wire and welded wire fabric (see AS/NZS 4534), sheet (see AS 1397) or open sections (see AS/NZS 4791) and tube hot-dip galvanized in continuous, semi-continuous or specialized plants (see AS/NZS 4792).NOTES:1 Advice and recommendations on information to be supplied by the purchaser to the hot-dip galvanizer at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Means for demonstrating compliance with this Standard are given in Appendix B.3 After-treatment of hot-dip galvanized articles is not covered by this Standard. Such treatment (if any) should be specified separately by the purchaser.

Originated as part of AS K53.1-1934.
Previous edition AS/NZS 4680:1999.
Second edition 2006.

AS/NZS 4792:2006	Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS 2331.2.1-2001	Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
AS 1817.3-2002	Metallic materials - Vickers hardness test Calibration of reference blocks
AS 1815.3-2002	Metallic materials - Rockwell hardness test Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
AS/NZS 4534:2006	Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017)
AS 1816.2-2002	Metallic materials - Brinell hardness test Verification and calibration of testing machines
AS 1199.1-2003	Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 3894.3-2002	Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013)
AS 1199.0-2003	Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1815.2-2002	Metallic materials - Rockwell hardness test Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
AS 1815.1-2002	Metallic materials - Rockwell hardness test Test method scales (A, B, C, D, E, F, G, H, K, N, T)
AS/NZS 4791:2006	Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS ISO 9004:2000	Quality management systems - Guidelines for performance improvements
AS 2331.1.3-2001	Methods of test for metallic and related coatings Local thickness tests - Magnetic method (Reconfirmed 2017)
AS 1816.1-2002	Metallic materials - Brinell hardness test Test method (ISO 6506-1:1999, MOD)
AS 1397-2001	Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 3750.15:1998	Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013)
AS/NZS 2243.1:2005	Safety in laboratories Planning and operational aspects
AS/NZS 3750.9:1994	Paints for steel structures - Organic zinc-rich primer
AS 1214-1983	Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS 2331.1.4-2001	Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
AS 2331.3.1-2001	Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS/NZS 2243.2:2006	Safety in laboratories Chemical aspects
AS 2331.2.3-2001	Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
AS 1627.4-2005	Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1817.1-2003	Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD)
HB 18.28-2005	Conformity assessment - Guidance on a third-party certification system for products
AS 1816.3-2002	Metallic materials - Brinell hardness test Calibration of reference blocks
AS 1817.2-2002	Metallic materials - Vickers hardness test Verification of testing machines
AS/NZS ISO 9001:2000	Quality management systems - Requirements

AS 2699.2:2020	Built-in components for masonry construction Connectors and accessories
AS 2419.3-2012	Fire hydrant installations Fire brigade booster connections
AS 2304:2019	Water storage tanks for fire protection systems
AS 3735-2001	Concrete structures for retaining liquids
AS/NZS 3845.2:2017	Road safety barrier systems and devices Road safety devices
AS 2470-2005	Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016)
AS/NZS 1576.1:2010	Scaffolding General requirements
AS 2118.1:2017	Automatic fire sprinkler systems General systems
AS 3585-2008	End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS/NZS 3500.2:2018	Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 2311:2009	Guide to the painting of buildings
AS 2740-2001	Wedge-type sockets
AS 2309-2008	Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric
AS/NZS 2041.6:2010	Buried corrugated metal structures Bolted plate structures
AS 1882-2002	Earth and bonding clamps (Reconfirmed 2020) (Reconfirmed 2013)
AS 2319-2001	Rigging screws and turnbuckles
AS/NZS 3500.1:2018	Plumbing and drainage Water Services
AS 2321-2006	Short-link chain for lifting purposes
AS 1410-2003	Sterilizers - Steam - Pre-vacuum
AS 2423-2002	Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021)
AS 1725.3-2010	Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020)
AS 1657-2013	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 5039-2008	Security screen doors and security window grilles
AS 2487-2002	Dry heat sterilizers
AS/NZS 7000:2016	Overhead line design
AS 5156-2010	Electronic speed limit signs
AS/NZS 4994.4:2018	Temporary edge protection Perimeter Protection Screens
AS 1154.1-2009	Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
AS/NZS 3500.2:2003	Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 4998:2009	Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022)
AS 2419.1:2017	Fire hydrant installations System design, installation and commissioning
AS/NZS 4065:2010	Concrete utility services poles
AS 3700:2018	Masonry Structures
AS/NZS 3500.3:2003	Plumbing and drainage Stormwater drainage
AS/NZS 2041.1:2011	Buried corrugated metal structures Design methods
AS/NZS 1252.1:2016	High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
AS 1397-2011	Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 3577-2006	Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS/NZS 2041.2:2011	Buried corrugated metal structures Installation
HB 331-2012	Overhead line design
AS 1725-2003	Chain-link fabric security fencing and gates
AS/NZS 1163:2009	Cold-formed structural steel hollow sections
AS 1725.4-2010	Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020)
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2089-2008	Sheave blocks for lifting purposes (Reconfirmed 2019)
AS 4773.1-2010	Masonry in small buildings Design
AS 1725.2-2010	Chain link fabric fencing Tennis court fencing - Commercial (Reconfirmed 2020)
AS/NZS 2041.4:2010	Buried corrugated metal structures Helically formed sinusoidal pipes
AS 2699.1:2020	Built-in components for masonry construction Wall ties
AS 4852.1-2009	Variable message signs Fixed signs
AS/NZS 3500.3:2018	Plumbing and drainage Stormwater drainage
AS 1154.1-2004	Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 3777-2008	Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 1085.7-2003	Railway track material Spring washers (Reconfirmed 2013)
AS 1789-2003	Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 4214:2018	Gaseous fire-extinguishing systems
AS 2699.3:2020	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 7000:2010	Overhead line design - Detailed procedures
AS/NZS 1577:2018	Scaffold decking components
AS 2318-2006	Swivels for lifting applications (Reconfirmed 2022)
AS 1138-2008	Thimbles for wire rope (Reconfirmed 2019)
AS 3996:2019	Access covers and grates
AS 2469-2005	Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg
AS 4398.2-2005	Insulators - Ceramic or glass - Station post for indoor or outdoor use - Voltages greater than 1000 V a.c. Tests (IEC 60168, Ed. 4.2 (2001) MOD)
AS 2339:2017	Traffic signal posts, mast arms and attachments
AS/NZS 3500.1:2003	Plumbing and drainage Water services
AS 2321:2014	Short-link chain for lifting purposes
AS/NZS 5131:2016	Structural steelwork - Fabrication and erection
AS 3660.1-2000	Termite management New building work
AS 4795.2-2011	Butterfly valves for waterworks purposes Double flanged
AS 4852.1:2019	Variable message signs Fixed signs
AS 1657:2018	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 2304-2011	Water storage tanks for fire protection systems
AS/NZS 3500.3:2015	Plumbing and drainage Stormwater drainage
AS/NZS 2311:2017	Guide to the Painting of Buildings
AS 3996-2006	Access covers and grates
AS 2741-2002	Shackles (Reconfirmed 2014)
AS 1725.5-2010	Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020)
AS/NZS 4994.1:2009	Temporary edge protection General requirements
AS 2419.1-2005	Fire hydrant installations System design, installation and commissioning

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

AS/NZS 4680:2006

Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory