AS/NZS 4067:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Firefighters' helmets
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
25-07-2024
27-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies performance requirements for the materials, design and construction of helmets intended for use by persons involved in fighting structural fires in city and urban areas.
| Committee |
SF-049
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5644 1
|
| Pages |
46
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for helmets designed to protect the head from a blowby a heavy or sharp object, as well as adverse environmental conditions likely to beencountered in structural firefighting.This Standard specifies performance criteria for faceshields, ear and neck protectors wherethese are fitted to the helmet. Other accessories are not covered by this Standard.Those organizations having responsibility for other specialist functions, e.g. bushfirefighting, are urged to use protective equipment specifically designed for these activities e.g. Type 3 helmets specified in AS/NZS 1801.
First published as AS 4067-1992.
Second edition 1994.
Jointly revised and designated as AS/NZS 4067:2004.
| AS/NZS 2512.6:1998 | Methods of testing protective helmets Measurement of horizontal peripheral vision clearance |
| AS 1815.1-2007 | Metallic materials - Rockwell hardness test Test method (scales A, B, C, D, E, F, G, H, K, N, T) (Reconfirmed 2017) |
| AS/NZS 2512.2:1998 | Methods of testing protective helmets General requirements for the conditioning and preparation of test specimens and laboratory conditions |
| AS/NZS 1906.1:2007 | Retroreflective materials and devices for road traffic control purposes Retroreflective sheeting |
| AS/NZS 2512.2:2006 | Methods of testing protective helmets General requirements for the conditioning and preparation of test specimens and laboratory conditions |
| AS/NZS 2512.1:1998 | Methods of testing protective helmets Definitions and headforms |
| AS/NZS 2512.7.1:1998 | Methods of testing protective helmets Determination of stability of protective helmets - Static stability |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 2755.1-1985 | Textile fabrics - Burning behaviour Determination of ease of ignition of vertically oriented specimens |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS/NZS 1906.1:1993 | Retroreflective materials and devices for road traffic control purposes Retroreflective materials |
| AS/NZS 2512.7.1:2006 | Methods of testing protective helmets Determination of stability of protective helmets - Static stability |
| AS 2755.2-1985 | Textile fabrics - Burning behaviour Measurement of flame spread properties of vertically oriented specimens |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS/NZS 2512.6:2006 | Methods of testing protective helmets Measurement of horizontal peripheral vision clearance |
| AS/NZS 2512.3.1:1999 | Methods of testing protective helmets - Determination of impact energy attenuation - Helmet drop test |
| AS 1815.1-2002 | Metallic materials - Rockwell hardness test Test method scales (A, B, C, D, E, F, G, H, K, N, T) |
| AS/NZS 2512.9:1996 | Methods of testing protective helmets Determination of load distribution |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 2512.3.1:2007 | Methods of testing protective helmets Determination of impact energy attenuation - Helmet drop test |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 1337:1992 | Eye protectors for industrial applications |
| AS/NZS 1801:1997 | Occupational protective helmets |
| AS/NZS 2512.9:2006 | Methods of testing protective helmets Determination of load distribution |
| AS/NZS 2512.5.1:1998 | Methods of testing protective helmets - Determination of strength of retention system - Static strength |
| AS/NZS 1716:2012 | Respiratory protective devices (Reconfirmed 2024) |
| AS/NZS 1716:2003 | Respiratory protective devices |
| SAA HB 9-1994 | Occupational personal protection |
| AS/NZS 1800:1998 | Occupational protective helmets - Selection, care and use |
| HB 37.5-1995 | Handbook of Australian fire Standards Textiles - Materials and products |
| AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
| AS/NZS 1801:1997 | Occupational protective helmets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.