AS/NZS 3750.7:1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints for steel structures - Aluminium paint
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
18-05-2018
English
01-01-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Provides requirements for aluminium coloured finishing paints that are intended to protect iron and steel against atmospheric corrosion.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7262 9355 5
|
| Pages |
13
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for a bright, aluminium coloured finish paint based on alkyd, phenolic or coumarone-indene resins intended to protect iron and steel against corrosion. Paint specified in the Standard is referred to in AS 2312 as Paint Reference No. 19. It may be suitable for application by brush, roller or spray. This paint will provide heat reflectance and medium-term protection from corrosion to suitably primed steelwork located in an industrial atmospheric environment.NOTES:1 This paint may be used as described for systems SP4-B, SP5-B, MP3-B, MP7-B and MSALP-A in AS 2312.2 Some paints may comply with Paint Reference No. 28 and be used for system HR2 in AS 2312.3 Alkyd aluminium paint may be provided with the aluminium paste as a second component, to be mixed prior to use.4 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.5 Care should be taken that aluminium paint is not used in an acidic or caustic environment. Additional information on the use and application of aluminium paint is provided in Appendix B.6 Alternative methods for determining compliance with this Standard are contained in Appendix C.
First published as Joint Standard AS/NZS 3750.7:1994.
| AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS 1580.455.1-1982 | Paints and related materials - Methods of test Resistance to water at room temperature |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS 1580.601.1-1975 | Paints and related materials - Methods of test Colour - Visual comparison |
| AS 2312-1984 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
| AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
| AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 2854-1986 | Tinplate cans for general use |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS 1580.403.1-1981 | Paints and related materials - Methods of test Scratch resistance |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
| AS 4089-1993 | Priming paint for steel - Single component - General purpose |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
| AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
| AS 2310-1980 | Glossary of paint and painting terms |
| AS 3904.1-1987 | Quality management and quality system elements Guidelines |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 2905-1986 | Steel drums |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
| AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS 2905-2005 | Steel drums |
| AS 1580.211.1-1980 | Paints and related materials - Methods of test Degree of settling |
| AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
| AS/NZS 1580.455.1:1997 | Paints and related materials - Methods of test Resistance to water at room temperature (Reconfirmed 2013) |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS 1580.211.2-1980 | Paints and related materials - Methods of test Ease of manual re-incorporation |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.