AS/NZS 3718:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Tap ware (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
01-06-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, timed flow taps, mixing taps mechanical (non-thermostatic), and tapsets in a range of nominal sizes from DN 6 to DN 50, generally for continuous operating temperatures not exceeding 80 degrees Celsius. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria.
| Committee |
WS-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6738 9
|
| Pages |
71
|
| ProductNote |
Reconfirmed 23/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/12/2016
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, timed flow taps, mixing taps mechanical (non-thermostatic), and tapsets in a range of nominal sizes from DN6 to DN50, generally for continuous operating temperatures not exceeding 80°C. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria.The Standard also specifies requirements for outlets of a tap or mixing tap and the requirements for tapset breaching piece assemblies.Means for demonstrating compliance with this Standard are given in AppendixA.Certification under the Plumbing Code of Australia is mandatory in Australia but not in New Zealand.
Originated in part as part of AS B1-1928T and MP 52-2001.
Previous editions AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and MP 52-2001.
AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and part of MP 52-2001 jointly revised, amalgamated and redesignated as AS/NZS 3718:2003.
Second edition AS/NZS 3718:2005.
Reissued incorporating Amendment No. 1 (May 2006).
Reissued incorporating Amendment No. 2 (December 2008).
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
| AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS/NZS 3499:2006 | Water supply - Flexible hose assemblies (Reconfirmed 2016) |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 3501-1987 | Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS/NZS 3662:2005 | Performance of showers for bathing |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 3635-1990 | Unified (ISO inch) screw threads, associated gauges, and gauging practice (Reconfirmed 2017) |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
| AS/NZS 3499:1997 | Flexible tube connectors for water supply |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| AS/NZS 1730:1996 | Washbasins |
| AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
| AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 2023:1995 | Baths for ablutionary purposes |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
| ATS 5200.489-2009 | Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications |
| ATS 5200.037.1-2006 | |
| ATS 5200.030-2012 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS/NZS 6400:2016 | Water efficient products - Rating and labelling |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| ATS 5200.030-2007 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.