AS/NZS 3439.1:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
16-08-2023
SA/SNZ TR 61439.0:2016
AS/NZS 61439.2:2016
AS/NZS 61439.1:2016
English
11-12-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for type-tested and partially type-tested low-voltage switchgear and controlgear assemblies. Specifies service conditions, construction requirements, technical characteristics and tests. This Standard contains the full text of IEC 60439-1:1999 but has been modified for Australian/New Zealand conditions.
| Committee |
EL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 4877 5
|
| Pages |
130
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz, or 1 500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements will apply. This standard applies to stationary or movable ASSEMBLIES with or without enclosure. NOTE Additional requirements for certain specific types of ASSEMBLIES are given in supplementary IEC standards. This standard applies to ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment. It also applies to ASSEMBLIES designed for use under special service conditions, for example in ships, in rail vehicles, for machine tools, for hoisting equipment or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with. This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
| Standards | Relationship |
| IEC 60439-1:1999 | Identical |
| IEC 60439-1:1999+AMD1:2004 CSV | Identical |
First published as AS 1136-1974.
Second edition 1980.
Revised and redesignated AS 1136.1-1988.
Revised and redesignated AS 3439.1-1993.
Jointly revised and designated as AS/NZS 3439.1:2002.
| AS 1852.604-1988 | International electrotechnical vocabulary Generation, transmission and distribution of electricity - Operation |
| AS/NZS 3947.4.1:2001 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
| AS/NZS 60269.3.0:2000 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
| AS/NZS 61000.3.7:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD) |
| AS 1852.826-1983 | International electrotechnical vocabulary - Electrical installations of buildings |
| AS 2467-1981 | Maintenance of electrical switchgear |
| AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
| AS/NZS 60269.3.1:2002 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| AS/NZS 3947.3:2001 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
| AS/NZS 4695.112:1996 | Fire hazard testing of electrotechnical products Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions |
| AS/NZS 61000.3.6:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD) |
| AS/NZS CISPR 11:2004 | Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 61000.4.3:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| AS/NZS 5000.1:1999 | Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 kV |
| AS/NZS 60269.1:2000 | Low-voltage fuses General requirements |
| AS 1852.471-1988 | International electrotechnical vocabulary - Insulators |
| AS/NZS 60269.2.0:2000 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| AS 3702-1989 | Item designation in electrotechnology |
| AS 1104-1978 | Informative symbols for use on electrical and electronic equipment |
| AS 4388-1996 | A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear |
| AS 3865-1991 | Calculation of the effects of short-circuit currents |
| AS/NZS 60269.2.1:2001 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses |
| AS/NZS 3947.1:2001 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 61000.4.3:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test |
| AS/NZS 60269.4.0:2000 | Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS 4278-1995 | A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) |
| AS 60038-2000 | Standard voltages |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS 1852.441-1985 | International electrotechnical vocabulary - Switchgear, controlgear and fuses |
| AS/NZS 61000.4.5:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS/NZS 5000.1:2005 | Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017) |
| AS 62208-2006 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| AS/NZS 3010:2017 | Electrical installations - Generating sets |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 3439.4:2009 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) |
| AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
| AS 60947.4.2-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
| AS/NZS 3439.2:2002 | Low-voltage switchgear and controlgear assemblies Particular requirements for busbar trunking systems (busways) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3439.5:2009 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| AS 4278-1995 | A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS 3439.4-1995 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) |
| AS 1735.5-2003 | Lifts, escalators and moving walks Lifts, escalators and moving walks |
| AS 61330-2005 | High-voltage/low-voltage prefabricated substations |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS 60947.7.2-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| AS 4388-1996 | A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear |
| AS/NZS 3947.1:2001 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS 62040.1.2-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.