AS/NZS 2638.2:2011
Current
The latest, up-to-date edition.
Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
27-05-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for PN 16 and PN 25 metal-bodied resilient-seated gate valves for waterworks purposes.
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9868 9
|
| Pages |
34
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for PN 16 and PN 25 metal-bodied resilient-seated gate valves for waterworks purposes, with a maximum operating temperature of 40°C. This Standard is applicable to the following versions: Valves of nominal sizes DN 80 to DN 750 with inside screw and non-rising spindle design, operated by a removable key, with or without a gearbox, for buried applications.Valves of nominal size DN 80 to DN 750 with inside screw and non-rising spindle design, operated by a handwheel, with or without a gearbox, for above-ground applications.Valves of nominal size DN 80 to DN 300 with outside screw and rising spindle design, operated by a handwheel, for above-ground applications where the position of the gate is required to be visible.Valves of nominal sizes DN 450 to DN 750 with an integral bypass arrangement.The design criteria of the valve and fasteners should be based on a minimum life expectancy of 50 years.Purchasing guidelines are given in Appendix B.
Originated as AS 2638-1983.
Third edition 1991.
AS 2638-1991 revised and redesignated in part as AS 2638.2-1999.
Third edition 2006.
AS 2638.2-2006 revised and redesignated as AS/NZS 2638.2:2011.
Reissued incorporating Amendment No. 1 (August 2017).
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 3894.12-2002 | Site testing of protective coatings Inspection report - Coating (Reconfirmed 2019) |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2317-1998 | Collared eyebolts |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 3894.10-2002 | Site testing of protective coatings Inspection report - Daily surface and ambient conditions (Reconfirmed 2019) |
| AS 1111.2-2000 | ISO metric hexagon bolts and screws - Product grade C - Screws |
| AS 1683.15.1-2000 | Methods of test for elastomers International rubber hardness (Reconfirmed 2018) |
| AS 1545-1976 | Methods for the calibration and grading of extensometers (Reconfirmed 2017) |
| AS 3894.14-2002 | Site testing of protective coatings Inspection report - Daily painting (Reconfirmed 2019) |
| AS 3894.13-2002 | Site testing of protective coatings Inspection report - Daily (Reconfirmed 2019) |
| AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 3894.11-2002 | Site testing of protective coatings Equipment report (Reconfirmed 2019) |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS 3996:2019 | Access covers and grates |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.