AS/NZS 2053.2:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-07-2024
English
12-07-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for rigid plain conduits and fittings of insulating material used in electrical installations. To be read in conjunction with AS/NZS2053.1.
| Committee |
EL-004
|
| DocumentType |
Standard
|
| ISBN |
0 7337 3954 7
|
| Pages |
12
|
| ProductNote |
Reconfirmed 10/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for rigid plain non-threadable conduits and fittings that are made of insulating material and are used for the protection of cables in electrical installations.This Standard shall be read in conjunction with AS/NZS 2053.1. The requirements of Part 1 apply except where they are added to, or modified by, this Standard.
Originated in Australia in part as AS C154-1958, AS C173-1964, AS C175-1967 and AS C183-1970.
Originated in New Zealand in part as NZS 2250.1:1969.
Previous edition AS/NZS 2053.2:1995.
Second edition 2001.
| AS/NZS 2053.1:2001 | Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
| AS/NZS 1462.1:1996 | Methods of test for PVC pipes and fittings Method for determining the dimensions of pipes and fittings |
| AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings (Reconfirmed 2024) |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| AS/NZS 1768:2007 | Lightning protection |
| AS 4806.2-2006 | Closed circuit television (CCTV) Application guidelines (Reconfirmed 2015) |
| AS/NZS 61241.14:2005 | Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD) |
| AS 1735.1-2001 | Lifts, escalators and moving walks - General requirements |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 2430.3.2:2004 | Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars |
| AS 2809.5-2001 | Road tank vehicles for dangerous goods Tankers for bitumen-based products |
| AS 2809.2-1999 | Road tank vehicles for dangerous goods - Tankers for flammable liquids |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS 3124-2002 | Approval and test specification for overhead line connector boxes (Reconfirmed 2020) (Reconfirmed 2013) |
| AS 2809.3-2008 | Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gases |
| AS 2144:2014 | Traffic signal lanterns |
| AS/NZS 4026:2008 | Electric cables - For underground residential distribution systems |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 1735.2-2001 | Lifts, escalators and moving walks Passenger and goods lifts - Electric |
| AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS/NZS 3013:2005 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020) |
| AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
| AS 2809.3-1999 | Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases |
| AS 2832.3-2005 | Cathodic protection of metals Fixed immersed structures |
| AS/NZS 2430.3.3:2004 | Classification of hazardous areas Examples of area classification - Flammable liquids |
| AS 1735.1-2003 | Lifts, escalators and moving walks General requirements |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS 2832.4-2006 | Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
| AS 2809.3:2017 | Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.