AS/NZS 1841.1:2007

1 - AS/NZS 1841.1:2007 PORTABLE FIRE EXTINGUISHERS - GENERAL REQUIREMENTS
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 NEW DESIGNS AND INNOVATIONS
7 - 1.3 REFERENCED DOCUMENTS
8 - 1.4 DEFINITIONS
8 - 1.4.1 Anti-discharge device
8 - 1.4.2 Anti-tamper seal
8 - 1.4.3 Cap
8 - 1.4.4 Carry handle
8 - 1.4.5 Compressed gas container
8 - 1.4.6 Control nozzle
8 - 1.4.7 Cylinder
9 - 1.4.8 Discharge fittings
9 - 1.4.9 Effective discharge time
9 - 1.4.10 Extinguishant
9 - 1.4.11 Extinguisher size
9 - 1.4.12 Gas point
9 - 1.4.13 Hanging bracket
9 - 1.4.14 Interstitial space
9 - 1.4.15 Maximum developed pressure
9 - 1.4.16 Maximum service temperature
9 - 1.4.17 Neck ring
9 - 1.4.18 Operating mechanism
9 - 1.4.19 Periodic test pressure
9 - 1.4.20 Portable fire extinguisher
9 - 1.4.21 Pressure indicator
9 - 1.4.22 Quick release bracket
10 - 1.4.23 Rechargeable
10 - 1.4.24 Siphon tube
10 - 1.4.25 Skirt
10 - 1.4.26 Strainer
10 - 1.4.27 Support fitting
10 - 1.4.28 Valve
10 - 1.4.29 Visible length
10 - 1.4.30 Working pressure
10 - 1.5 CLASSIFICATION AND RATING
12 - SECTION 2 MATERIALS OF CONSTRUCTION
12 - 2.1 GENERAL
12 - 2.2 CYLINDER
12 - 2.3 COMPRESSED GAS CONTAINERS
12 - 2.4 VALVE OR CAP
12 - 2.5 STABILITY
12 - 2.6 EXPOSED NON-METALLIC COMPONENTS
12 - 2.7 CORROSION TEST
13 - SECTION 3 DESIGN
13 - 3.1 GENERAL
13 - 3.2 MAXIMUM DEVELOPED PRESSURE
13 - 3.3 CYLINDERS
13 - 3.3.1 General
13 - 3.3.2 Shape
14 - 3.3.3 Wall thickness
14 - 3.3.4 Neck ring opening
14 - 3.4 METHOD OF OPERATION
14 - 3.4.1 General
14 - 3.4.2 Operating mechanism
16 - 3.5 LIQUID LEVEL INDICATION
16 - 3.6 EXPANSION DEVICE
16 - 3.7 PRESSURE-INDICATING DEVICE
16 - 3.7.1 General
16 - 3.7.2 Rechargeable type extinguishers
17 - 3.7.3 Non-rechargeable type extinguishers
17 - 3.8 DISCHARGE FITTINGS
17 - 3.8.1 Siphon tube
17 - 3.8.2 Strainer
17 - 3.8.3 Discharge hose and fitting
18 - 3.9 FILLING (CHARGING)
18 - 3.10 FILLING TOLERANCE
18 - 3.11 SUPPORT FITTING
18 - 3.11.1 General
19 - 3.11.2 Quick-release brackets
20 - SECTION 4 CONSTRUCTION
20 - 4.1 CYLINDER
20 - 4.1.1 General
20 - 4.1.2 Joints
20 - 4.1.3 Neck ring
20 - 4.1.4 Anti-corrosion treatment of internal surfaces
20 - 4.1.5 Anti-corrosion treatment of external surfaces
20 - 4.2 ORGANIC LININGS
20 - 4.2.1 General
21 - 4.2.2 Adhesion test
21 - 4.2.3 Continuity test
21 - 4.3 SKIRTS
21 - 4.4 VALVE OR CAP
22 - 4.5 HANDLE AND HANGING BRACKET
22 - 4.5.1 General
22 - 4.5.2 Carry handle or grip
23 - SECTION 5 PERFORMANCE REQUIREMENTS
23 - 5.1 FIRE RATING
23 - 5.2 INTERMITTENT DISCHARGE
23 - 5.3 EFFECTIVE DISCHARGE
23 - 5.3.1 General
24 - 5.3.2 Test procedure
24 - 5.4 ELECTRICAL CAPABILITY
24 - 5.4.1 Suitability
24 - 5.4.2 Water-based extinguishants
25 - SECTION 6 TESTING
25 - 6.1 VAPORIZING LIQUID EXTINGUISHERS
25 - 6.2 PRESSURE TESTS FOR EXTINGUISHERS OTHER THAN CARBON DIOXIDE TYPE
25 - 6.2.1 Strength test
25 - 6.2.2 Proof test
25 - 6.3 PRESSURE TESTS FOR CARBON DIOXIDE TYPE EXTINGUISHERS
25 - 6.3.1 Extinguisher body
25 - 6.3.2 Valves and fittings
25 - 6.4 CLEAR PASSAGE TEST
26 - 6.5 COMPONENT MATERIALS TEST
26 - 6.6 GAS LEAKAGE TESTS
26 - 6.6.1 General
26 - 6.6.2 Test by electronic leak detection
26 - 6.6.3 Test by immersion
27 - 6.6.4 Test by weighing
27 - 6.6.5 Alternative methods
27 - 6.7 EXTERNAL CORROSION TEST
27 - 6.8 PULSATION TEST
27 - 6.9 SUPPORT FITTING TEST
28 - 6.10 EXTINGUISHER DROP TEST
28 - 6.11 VALVE IMPACT TEST
28 - 6.12 SIPHON TUBE TEST
28 - 6.13 TESTS FOR PLASTICS MATERIALS
29 - SECTION 7 DETERMINATION OF COMPLIANCE
29 - 7.1 SCOPE
29 - 7.2 GENERAL
31 - SECTION 8 IDENTIFICATION COLOURS
31 - 8.1 GENERAL
31 - 8.2 BODY COLOUR
31 - 8.3 IDENTIFICATION COLOUR
32 - SECTION 9 INSTRUCTIONS AND MARKING
32 - 9.1 GENERAL
32 - 9.2 PERMANENT MARKING
33 - 9.3 MAIN LABEL
33 - 9.3.1 General
33 - 9.3.2 Instructions
33 - 9.3.3 Use code pictographs
34 - 9.4 IDENTIFICATION
35 - 9.5 SERVICING INFORMATION
36 - 9.6 POLYCARBONATE CAUTION
36 - 9.7 SERVICE INFORMATION
36 - 9.8 EXTINGUISHERS INTENDED FOR SALE IN OTHER COUNTRIES
37 - SECTION 10 PACKING AND SHIPMENT
37 - 10.1 GENERAL
37 - 10.2 WATER, WET CHEMICAL AND FOAM FIRE EXTINGUISHERS
37 - 10.3 POWDER, CARBON DIOXIDE AND VAPORIZING LIQUID EXTINGUISHERS
38 - SECTION 11 COMPRESSED GAS CONTAINERS
38 - 11.1 GENERAL
38 - 11.1.1 Rechargeable compressed gas containers
38 - 11.1.2 Non-rechargeable compressed gas containers
38 - 11.2 HIGH-PRESSURE COMPRESSED GAS CONTAINERS
38 - 11.2.1 General
38 - 11.2.2 Materials
38 - 11.2.3 Design
38 - 11.2.4 Tests
39 - 11.3 CHECKING FOR LEAKAGE OF GAS
39 - 11.4 PROTECTIVE FINISHES
39 - 11.5 MARKING OF COMPRESSED GAS CONTAINERS
39 - 11.5.1 Rechargeable compressed gas containers
40 - 11.5.2 Non-rechargeable compressed gas containers
40 - 11.6 ALUMINIUM ALLOY CONTAINERS-CHEMICAL COMPOSITION
41 - APPENDIX A - ADHESION TEST
41 - A1 SCOPE
41 - A2 PRINCIPLE
41 - A3 APPARATUS
41 - A4 PROCEDURE
41 - A5 RESULTS
42 - APPENDIX B - EXTERNAL CORROSION TEST
42 - B1 SCOPE
42 - B2 PRINCIPLE
42 - B3 APPARATUS
42 - B4 PROCEDURE
42 - B5 ASSESSMENT
43 - APPENDIX C - VALVE IMPACT TEST
43 - C1 SCOPE
43 - C2 PRINCIPLE
43 - C3 APPARATUS
43 - C4 PROCEDURE
44 - C5 RESULTS

Provides general requirements for portable fire extinguishers, including the materials, design, construction, methods of manufacture, performance of the extinguisher and any associated gas container, including requirements for instructions and markings.

This Standard specifies requirements for portable fire extinguishers. It covers materials, methods of manufacture and performance of the extinguisher and any associated compressed gas container, instructions and markings.Specific requirements for individual types of fire extinguishers are given in AS/NZS 1841.2, AS/NZS 1841.3, AS/NZS 1841.4, AS/NZS 1841.5, AS/NZS 1841.6, AS/NZS 1841.7 and AS/NZS 1841.8A portable fire extinguisher is generally referred to in this Standard as an extinguisher or the extinguisher and typical components used in portable fire extinguishers are illustrated in Figure 1.1.Manufacturers making a statement of compliance with this Australian/New Zealand Standard on a product, or on packaging or promotional material related to that product, should ensure that such compliance is capable of being verified.

Originated in Australia in part as part of AS A31-1937.
Final Australian edition AS 1841.1-1992.
Originated in New Zealand in part as part of NZSS 1241-44:1962.
Final New Zealand editions NZS 4506:1978 and NZS 4551:1974.
AS 1841.1-1992 and part of NZS 4506:1978 and NZS 4551:1974 jointly revised and designated AS/NZS 1841.1:1997.
Second edition 2007.