AS/NZS 1580.205.1:1997
Current
Current
The latest, up-to-date edition.
Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
05-12-1997
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This Standard sets out a procedure for determining the suitability of a paint for application by brushing. It provides for the assessment of defects observed during and after application of the paint.
| Committee |
CH/3
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1593 1
|
| Pages |
2
|
| ProductNote | |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out a procedure for determining the suitability of a paint for application by brushing. It provides for the assessment of defects observed during and after application of the paint.
Originated in Australia as AS K41.205.1-1957.
Previous Australian edition AS 1580.205.1-1981.
Jointly revised and designated AS/NZS 1580.205.1:1997.
| AS 1580.101.4-1986 | Paints and related materials - Methods of test Conditions of test, temperature controlled |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS 1580.107.3-1980 | Paints and related materials - Methods of test Determination of wet film thickness by wheel gauge |
| AS 1580.102.1-2002 | Paints and related materials - Methods of test Sampling procedure |
| AS/NZS 1580.101.4:1999 | Paints and related materials - Methods of test Conditions of test - Temperature control (Reconfirmed 2013) |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS/NZS 1580.107.3:1997 | Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013) |
| AS 1580.102.1-1992 | Paints and related materials - Methods of test Sampling procedure |
| AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
| AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
| AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
| AS 3730.3-2006 | Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016) |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 4025.2-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat |
| AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
| AS/NZS 3750.11:2009 | Paints for steel structures Chlorinated rubber - High-build and gloss |
| AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
| AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
| AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
| AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
| AS 3730.13-2006 | Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.22:2008 | Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
| AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
| AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
| AS 3730.26-1993 | Guide to the properties of paints for buildings Floor varnish - Moisture cured |
| AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
| AS 3730.25-2006 | Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016) |
| AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
| AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
| AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
| AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
| AS 3730.17-2006 | Guide to the properties of paints for buildings Primer - Wood - Latex - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
| AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
| AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
| AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
| AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
| AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
| AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
| AS/NZS 3750.16:1998 | Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013) |
| AS 1580.409.3-2002 | Paints and related materials - Methods of test Blocking resistance of latex paint finishes (Reconfirmed 2013) |
| AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
| AS 3730.27-2006 | Guide to the properties of paints for buildings Clear coatings for interior timber floors |
| AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
| AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
| AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
| AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
| AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
| AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
| AS 4089-1993 | Priming paint for steel - Single component - General purpose |
| AS 3730.0-2006 | Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints |
| AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.