AS/NZS 1050.2:1994
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-08-1994
Specifies a gravimetric method for the determination of carbon content between 0.05 percent and 4.5 percent in all types of iron and steel.
| Committee |
CH/10
|
| DocumentType |
Standard
|
| ISBN |
0 7262 9003 3
|
| Pages |
7
|
| ProductNote |
Reconfirmed 16/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out a gravimetric method for the determination of the total carbon content of all types of iron and steel, after combustion in oxygen using a high temperature resistance furnace or high frequency induction heating. The method is applicable to all types of iron and steel with carbon contents in the range 0.05% to 4.5%.
First published as part of AS K1-1925.
Second edition 1926.
Revised and redesignated in part as AS K1.2-1951.
Second edition 1968.
AS K1.2-1968 withdrawn 1978.
Revised and redesignated AS 1050.2.-1984.
Jointly revised and designated as Joint Standard AS/NZS 1050.2:1994.
| AS 2850-1986 | Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct |
| AS 1213-1982 | Iron and steel - Methods of sampling |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1085.10-2002 | Railway track material Rail anchors (Reconfirmed 2013) |
| AS 2003-1991 | Carbon and low alloy steel - Measurement of decarburization (Reconfirmed 2016) |
| AS 2556-2000 | Electric resistance welded steel air heater tubes (Reconfirmed 2016) |
| AS 3600-2001 | Concrete structures |
| AS 1982-1993 | Methods for the measurement of case depth in steels (Reconfirmed 2016) |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS 1085.2-2002 | Railway track material Fishplates (Reconfirmed 2013) |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs (Reconfirmed 2016) |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 2875-1995 | Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg |
| AS 2266-2002 | Carbon steel spring wire for bedding and seating (Reconfirmed 2016) |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.