AS 4506-2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metal finishing - Thermoset powder coatings (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
16-06-2024
English
18-05-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies the relevant test procedures and performance requirements for thermoset powder coatings applied to metal substrates, with the exception of aluminium, for architectural applications.
| Committee |
MT-009
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6682 X
|
| Pages |
33
|
| ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard sets out relevant test procedures and specifies performance requirements for thermoset powder coatings applied to metal substrates, with the exception of aluminium for architectural applications (seeAS3715). It specifies six atmospheric categories.The requirements to be specified by the purchaser at the time of enquiry or order are shown in Appendix A. The means of demonstrating compliance with the Standard is shown in Appendix B.Information on the weathering of powder-coated metal products is given in AppendixC.Information on maintenance of coatings is given in AppendixD.Recommendations for the repair of powder coated metals are given in Appendix E.Advice on handling and temporary protection during transportation and installation is given in AppendixF.
Originated as AS/NZS 4506:1998.
Revised and designated as AS 4506-2005.
| AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
| AS 1672.1-1997 | Limes and limestones Limes for building |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.481.1.2:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing) (Reconfirmed 2013) |
| AS 3894.3-2002 | Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013) |
| AS 2483-2003 | Metal finishing - Recommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) |
| AS 1627.5-2003 | Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS 1627.4-2002 | Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning |
| AS 1627.1-2003 | Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017) |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
| AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 2633:1996 | Guide to the specification of colours (Reconfirmed 2013) |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS 2331.3.8-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Humidity test - 24 h cycle, damp heat |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 3754-1990 | Safe application of powder coatings by electrostatic spraying |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS 1745.1-1989 | Outdoor weathering of plastics in the Australian environment - Commercial products |
| AS 1627.0-1997 | Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017) |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
| AS 3972-1997 | Portland and blended cements |
| AS/NZS 1580.481.1.12:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change (Reconfirmed 2013) |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
| AS/NZS 1580.481.1.5:1999 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss (Reconfirmed 2013) |
| AS/NZS 1580.481.1.11:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of chalking (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS/NZS 2311:2009 | Guide to the painting of buildings |
| AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
| AS 1725.3-2010 | Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020) |
| AS/NZS 2130:1998 | Cots for day nursery, hospital and institutional use - Safety requirements |
| AS 1725-2003 | Chain-link fabric security fencing and gates |
| AS 1725.4-2010 | Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 1725.2-2010 | Chain link fabric fencing Tennis court fencing - Commercial (Reconfirmed 2020) |
| AS 1725.1-2010 | Chain link fabric fencing Security fences and gates - General requirements (Reconfirmed 2020) |
| AS 3996:2019 | Access covers and grates |
| AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
| AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
| AS/NZS 2311:2017 | Guide to the Painting of Buildings |
| AS 1725.5-2010 | Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.