AS 4233.1:2013
Current
The latest, up-to-date edition.
High pressure water jetting systems Safe operation and maintenance
12-12-2013
This Standard provides requirements and guidance for the operation and maintenance of water jetting equipment. It describes methods for eliminating hazards or minimizing risks associated with high pressure water jetting. This Standard applies to high pressure water jetting systems with an output capability greater than 800 bar litres per minute and less than 5600 bar litres per minute (identified as Class A) and systems with an output capability in excess 5600 bar litres per minute (identified as Class B).
| Committee |
SF-043
|
| DocumentType |
Standard
|
| ProductNote |
Redesignated to AS 4233.1:2013 by Amendment 1.
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
This Standard provides requirements and guidance for the operation and maintenance of water jetting equipment. It describes methods for eliminating hazards or minimizing risks associated with high pressure water jetting.This Standard applies to high pressure water jetting systems with an output capability greater than 800 bar litres per minute and less than 5600 bar litres per minute (identified as Class A) and systems with an output capability in excess 5600 bar litres per minute (identified as Class B).This Standard applies to:(a)High pressure water jetting systems pressurized by positive displacement pumps with an output capability greater than 800 bar litres per minute.(b)High pressure water jetting operations carried out at pressures above 800 bar litres per minute and includes jetting operations involving the use of additives and abrasives.(c)Water jetting operations below 800 bar litres per minute where there is a foreseeable risk of injury to operators.NOTE: The guidance provided in this Standard may also be used for any water jetting operation.
Originated as AS/NZS 4233(Int):1994.
Previous edition AS/NZS 4233.1:1999.
Second edition 2013.
Reissued and redesignated incorporating Amendment No. 1 (September 2020) as AS 4233.1:2013.
| AS 2865-2009 | Confined spaces |
| AS/NZS 2161.2:2005 | Occupational protective gloves General requirements |
| AS/NZS 1715:2009 | Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024) |
| AS/NZS 2210.2:2009 | Occupational protective footwear Test methods (ISO 20344:2004, MOD) |
| AS 1885.1-1990 | Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease, known as the Workplace injury and disease recording standard |
| AS/NZS ISO 6529:2006 | Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases |
| AS 1939 SUPP 2-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 2 (Supplement 2 to AS 1939-1990) |
| AS 1939 SUPP 1-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 1 (Supplement 1 to AS 1939-1990) |
| AS/NZS 4801:2001 | Occupational health and safety management systems - Specification with guidance for use |
| AS/NZS 1270:2002 | Acoustics - Hearing protectors (Reconfirmed 2014) |
| AS 1742.3-2009 | Manual of uniform traffic control devices Traffic control for works on roads |
| AS/NZS 1337.0(Int):2010 | Personal eye protection - Eye and face protectors - Vocabulary |
| AS/NZS 2161.5:1998 | Occupational protective gloves Protection against cold |
| AS/NZS 2210.1:2010 | Safety, protective and occupational footwear Guide to selection, care and use |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 1337.6:2012 | Personal eye protection Prescription eye protectors against low and medium impact |
| AS/NZS 1801:1997 | Occupational protective helmets |
| AS 3765.2-1990 | Clothing for protection against hazardous chemicals Limited protection against specific chemicals |
| AS/NZS 2161.3:2005 | Occupational protective gloves Protection against mechanical risks (Reconfirmed 2016) |
| AS 1885.1 SUPP 1-1991 | Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease - Workplace injury and disease recording form (Supplement to AS 1885.1-1990) |
| AS/NZS 1337.5:2011 | Eye and face protection Eye protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| AS/NZS 1337.2:2012 | Personal eye protection Mesh eye and face protectors for occupational applications |
| AS/NZS 1337.4:2011 | Eye and face protection Filters and eye protectors against laser radiation (laser eye-protectors) |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS/NZS 1891.3:1997 | Industrial fall-arrest systems and devices - Fall-arrest devices |
| AS 3765.1-1990 | Clothing for protection against hazardous chemicals Protection against general or specific chemicals |
| AS 2801-1985 | Information processing - Conversion between the Australian Standard 7-bit coded character set (AS 1776) and the CCITT International Telegraph Alphabet No 2 (ITA 2) |
| AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.