AS 4049.1-2005
Current
The latest, up-to-date edition.
Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
21-01-2005
Specifies requirements for solvent-borne paints used for markings on pavement surfaces. The Standard applies to paints suitable for use with glass beads complying with AS/NZS2009, and intended for use by spray application, brush or a roller.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7337 6432 0
|
Pages |
31
|
ProductNote |
Reconfirmed 27/05/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out requirements for solvent-borne paints as used for markings on pavement surfaces. The Standard is applicable to paints intended for use by spray application. It is also applicable to slower drying paints which may be applied by brush or roller. All paints are suitable for use with glass beads complying with AS/NZS2009.Alternative means for determining compliance with this Standard are given in AppendixA.Spraying may be by air-atomizing or airless application processes.
Originated as K146-1967.
Revised and redesignated AS 4049.1-1992.
Second edition 2005.
AS 2905-2005 | Steel drums |
AS 1199.2-2003 | Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016) |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
AS 2905-1986 | Steel drums |
AS 2378-1996 | Density bottles |
AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
AS 2854-2004 | Tinplate cans for general use |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS/NZS 1580.401.8:1997 | Paints and related materials - Methods of test No-pick-up time of road marking paints (Reconfirmed 2013) |
AS/NZS 2009:2002 | Glass beads for pavement-marking materials |
AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
AS/NZS 2904:1995 | Damp-proof courses and flashings |
AS 1199.3-2003 | Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016) |
AS 1742.3-2002 | Manual of uniform traffic control devices - Traffic control devices for works on roads |
AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
AS 2700-1996 | Colour Standards for general purposes - Swatches |
AS 2758.2-1996 | Aggregates and rock for engineering purposes - Aggregate for sprayed bituminous surfacing |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS/NZS ISO 9000:2000 | Quality management systems - Fundamentals and vocabulary |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS 1152-1993 | Specification for test sieves |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS/NZS ISO 9000:2006 | Quality management systems - Fundamentals and vocabulary |
AS/NZS 1580.107.2:1995 | Paints and related materials - Methods of test Determination of wet film thickness from wet film mass (Reconfirmed 2013) |
AS/NZS 2009:2006 | Glass beads for pavement-marking materials (Reconfirmed 2016) |
AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
AS/NZS 1580.107.3:1997 | Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013) |
AS 1199.4-2003 | Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016) |
AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
AS 1580.107.1-2004 | Paints and related materials - Methods of test Determination of wet film thickness from dry film mass |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
AS 1742.2-2009 | Manual of uniform traffic control devices Traffic control devices for general use |
AS 1742.2-1994 | Manual of uniform traffic control devices Traffic control devices for general use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.