AS 3500.1-1992
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
National Plumbing and Drainage Code Water supply
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
English
01-01-1992
Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com.
This publication is a copy of the physical archived hardcopy. Some pages may be stamped or contain handwriting. SAI Global has endeavoured to reproduce this document to the best possible standard of quality. Please utilise the preview feature to sample the quality before purchasing.
Specifies uniform requirements for the installation of water services and takes account of regulations stipulated by the Authorities responsible for the administration of water supply legislation in each State and Territory of Australia. The requirements of this Standard apply to that part of the cold water service from the point of connection to the water main up to the outlet points within the property. This Standard applies to new installations as well as alterations, additions and repairs to existing installations.
Committee |
WS-014
|
DocumentType |
Standard
|
ISBN |
0 7262 7945 5
|
Pages |
71
|
ProductNote |
(In Rul PL/1)
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
First published as AS 3500.1-1990.
Second edition 1992.
AS 1726-1993 | Geotechnical site investigations |
AS 2634-1983 | Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins |
AS 3600-1994 | Concrete structures |
AS 1477.1-1988 | Unplasticized PVC (UPVC) pipes and fittings for pressure applications Pipes |
AS 1428 SUPP 1-1988 | Design for access and mobility - Extracts - Design rules for access by the disabled (Supplement to AS 1428-1977) |
AS 2941-1995 | Fixed fire protection installations - Pumpset systems |
AS 2845.1-1991 | Water supply - Mechanical backflow prevention devices - Materials, design and performance requirements |
AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 1379-1997 | Specification and supply of concrete |
AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
AS 3500.0-1990 | National Plumbing and Drainage Code Glossary of terms |
AS 2544-1982 | Grey iron pressure pipes and fittings |
AS 2441-1988 | Installation of fire hose reels |
AS 2118-1982 | Automatic fire sprinkler systems (known as the SAA Code for Automatic Fire Sprinkler Systems) |
AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
AS 2280-1988 | Ductile iron pressure pipes and fittings |
AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
AS 1218-1990 | Flushing cisterns |
AS 2878-1986 | Timber - Classification into strength groups |
AS 1478-1992 | Chemical admixtures for concrete |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 2129-1994 | Flanges for pipes, valves and fittings |
AS 1734-1986 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate |
AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 2642.2-1989 | Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications |
AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 1830-1986 | Iron castings - Grey cast iron |
AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
AS 1397-1993 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 2642.3-1983 | Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
AS 1302-1991 | Steel reinforcing bars for concrete |
AS 1415.1-1984 | Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Pipes |
AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 1446-1981 | Carbon steels and carbon-manganese steels - Hot-rolled slab, plate and strip based on chemical composition |
AS 2032-1977 | Code of practice for installation of UPVC pipe systems |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS 1604-1997 | Timber - Preservative-treated - Sawn and round |
AS 2419.1-1994 | Fire hydrant installations System design, installation and commissioning |
AS 1304-1991 | Welded wire reinforcing fabric for concrete |
AS 3735-1991 | Concrete structures for retaining liquids |
AS 3500.4-1994 | National Plumbing and Drainage Code Hot water supply systems |
AS 2977.1-1988 | Unplasticized PVC (UPVC) pipes for pressure applications - Compatible with cast iron pipe outside diameters - Pipes |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS 1724.2-1983 | Grey iron pressure pipes and fittings with bolted gland joints - Soft metric series for maintenance purposes |
AS 1159-1988 | Polyethylene pipes for pressure applications |
AS 3972-1997 | Portland and blended cements |
AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
AS 2033-1980 | Installation of polyethylene pipe systems |
AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
AS 1646-1992 | Elastomeric seals for waterworks purposes |
AS 2845.2-1994 | Water supply - Backflow prevention devices - Air gaps and break tanks |
AS 2610.2-1993 | Spa pools - Private spas |
AS/NZS 3666.2:1995 | Air-handling and water systems of buildings - Microbial control Operation and maintenance |
AS 2118.3-1997 | Automatic fire sprinkler systems - Deluge |
AS 1718-1992 | Water supply - Copper alloy screw-down pattern taps - Specified by dimensions |
AS 3982-1991 | Urinals |
AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
AS 3718-1992 | Water supply - Metal-bodied taps - Specified by performance |
ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
AS 1172.2-1993 | Water closets of 6/3 L capacity - Cisterns |
AS 2845.2-1996 | Water supply - Backflow prevention devices Air gaps and break tanks |
AS 1910-1994 | Water supply - Float control valves for use in hot and cold water |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 3497-1994 | Authorization requirements for plumbing products - Domestic type water treatment appliances |
AS/NZS 3982:1996 | Urinals |
SAA/SNZ HB32:1995 | Control of microbial growth in air-handling and water systems in buildings (Reconfirmed 2016) |
AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
AS 2610.1-1993 | Spa pools - Public spas |
AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
AS 3500.4-1994 | National Plumbing and Drainage Code Hot water supply systems |
AS 3565.1-1994 | Meters for cold potable water Volumetric chamber and turbine meters |
AS 2845.3-1993 | Water supply - Backflow prevention devices Field testing and maintenance |
AS 3496-1995 | Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps |
AS 4118.2.1-1995 | Fire sprinkler systems Piping - General (Reconfirmed 2013) |
AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
AS/NZS 3666.1:1995 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
AS 4032-1992 | Thermostatic mixing valves - Materials, design and performance requirements |
AS 4032-1995 | Thermostatic mixing valves - Materials, design and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.