AS 2714-2008
Current
The latest, up-to-date edition.
The storage and handling of organic peroxides (Reconfirmed 2021)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
21-10-2008
Sets out requirements and recommendations for the safe storage, handling, dispensing and disposal of packaged organic peroxides of Division 5.2. Includes safe separation distances, fire protection and emergency management.
Committee |
CH-009
|
DocumentType |
Standard
|
ISBN |
0 7337 8877 7
|
Pages |
45
|
ProductNote |
Reconfirmed 05/02/2021.
This standard has been reconfirmed in Australia in 2021 and remains current in New Zealand. |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard provides requirements and recommendations for the storage, handling, dispensing and disposal of dangerous goods of Division 5.2 (i.e. organic peroxides of Types B, C, D, E and F), as classified in the UN Recommendations on the Transport of Dangerous Goods-Model Regulations and listed in the ADG Code.This Standard provides requirements for organic peroxides of Types B, C, D, E, and F. Organic peroxides of Types A and G are outside the scope of this Standard. Type A organic peroxides are not accepted by the ADG Code for transport in the packaging in which they are tested, because of their hazardous nature: specific requirements for the storage of such substances should be sought from the supplier and the regulatory authority. Type G organic peroxides are exempted from Division 5.2 in the ADG Code, due to their relatively low level of hazard.NOTES:1 Advice supplementary to that provided in this Standard should be sought from the supplier of the goods.2 A discussion of the general properties and hazards presented by organic peroxides is provided in Appendix A.This Standard provides minimum safety requirements for storage facilities, operating procedures, emergency planning and fire protection. It provides technical guidance that may assist in the storage and handling of organic peroxides in accordance with the risk management principles of NOHSC:1015 and legislation that draws upon that document.
Originated as AS 2714-1984.
Previous edition 1993.
Third edition 2008.
AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
AS 2359.12-1996 | Powered industrial trucks Hazardous areas |
AS 2118.10-1995 | Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013) |
AS/NZS 2865:2001 | Safe working in a confined space |
AS/NZS 2430.3.9:2004 | Classification of hazardous areas Examples of area classification - Miscellaneous |
AS 2359.14-2005 | Powered industrial trucks Fork arms - Technical characteristics and testing (Reconfirmed 2016) (Reconfirmed 2023) |
AS 2359.17-2008 | Powered industrial trucks Stability tests for rough terrain trucks (ISO 8379:1998, MOD) |
AS/NZS 2430.3.4:2004 | Classification of hazardous areas Examples of area classification - Flammable gases |
AS/NZS 2161.7.3:2005 | Occupational protective gloves Protection against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials |
AS/NZS 1850:1997 | Portable fire extinguishers - Classification, rating and performance testing |
AS 2359.16-2005 | Powered industrial trucks Safety signs and hazard pictorials - General principles (Reconfirmed 2016) (Reconfirmed 2023) |
AS/NZS 2430.3.1:2004 | Classification of hazardous areas Examples of area classification - General |
AS 2359.15-2005 | Powered industrial trucks Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements (Reconfirmed 2016) (Reconfirmed 2023) |
AS 2118.6-1995 | Automatic fire sprinkler systems - Combined sprinkler and hydrant |
AS 3846-2005 | The handling and transport of dangerous cargoes in port areas |
AS 2118.3-1997 | Automatic fire sprinkler systems - Deluge |
AS/NZS 2210.1:1994 | Occupational protective footwear - Guide to selection, care and use |
AS/NZS 2161.2:2005 | Occupational protective gloves General requirements |
AS/NZS 2161.10.2:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration |
AS 2118.8-1997 | Automatic fire sprinkler systems Minor modifications (Reconfirmed 2013) |
AS/NZS 2161.1:2000 | Occupational protective gloves Selection, use and maintenance |
AS 1530.4-2005 | Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction |
AS/NZS 2161.10.3:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals (Reconfirmed 2016) |
AS 2359.13-2005 | Powered industrial trucks Brake performance and component strength |
AS 1530.1-1994 | Methods for fire tests on building materials, components and structures Combustibility test for materials (Reconfirmed 2016) |
AS/NZS 2161.3:2005 | Occupational protective gloves Protection against mechanical risks (Reconfirmed 2016) |
AS 2359.19-2008 | Powered industrial trucks Additional stability tests for industrial variable-reach trucks handling freight containers of length 6 m and above |
AS 2359.1-1995 | Powered industrial trucks - General requirements |
AS/NZS 2161.8:2002 | Occupational protective gloves Protection against ionizing radiation and radioactive contamination (Reconfirmed 2016) |
AS/NZS 2161.7.2:2005 | Occupational protective gloves Protection against cuts and stabs by hand knives - Gloves and arm guards made of material other than chainmail (Reconfirmed 2017) |
AS/NZS 2430.3.6:2004 | Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents |
AS/NZS 2161.4:1999 | Occupational protective gloves Protection against thermal risks (heat and fire) (Reconfirmed 2016) |
AS/NZS 2161.10.1:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Terminology and performance requirements (Reconfirmed 2016) |
AS 1915-1992 | Electrical equipment for explosive atmospheres - Battery-operated vehicles (Reconfirmed 2013) |
AS/NZS 2161.7.1:1998 | Occupational protective gloves Protection against cuts and stabs by hand knives - Chainmail gloves and arm guards (Reconfirmed 2016) |
AS/NZS 2161.5:1998 | Occupational protective gloves Protection against cold |
AS/NZS 1020:1995 | The control of undesirable static electricity |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
AS 2359.11-1995 | Powered industrial trucks Fork-lift trucks - Hook-on type fork arms and fork carriers - Mounting dimensions |
AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
AS 2359.18-2008 | Powered industrial trucks Stability tests for industrial variable-reach trucks |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 1337.6:2007 | Personal eye protection Prescription eye protectors against low and medium impact |
AS/NZS 2161.9:2002 | Occupational protective gloves Method of measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
AS/NZS 2430.3.2:2004 | Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS/NZS 1337.4:2004 | Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors) |
AS/NZS 2430.3.5:2004 | Classification of hazardous areas Examples of area classification - Refineries and major processing plants |
AS 2118.1-1999 | Automatic fire sprinkler systems General requirements |
AS 1674.1-1997 | Safety in welding and allied processes Fire precautions (Reconfirmed 2016) |
AS/NZS 1337.5:2004 | Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
AS/NZS 2430.3.8:2004 | Classification of hazardous areas Examples of area classification - Surface coatings and adhesives |
AS/NZS 1716:2003 | Respiratory protective devices |
AS 2359.10-1995 | Powered industrial trucks Fork-lift trucks - Hook-on type fork arms - Vocabulary |
AS/NZS 2430.3.7:2004 | Classification of hazardous areas Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants |
AS/NZS 2430.3.3:2004 | Classification of hazardous areas Examples of area classification - Flammable liquids |
AS 1216-2006 | Class labels for dangerous goods |
AS 2118.2-1995 | Automatic fire sprinkler systems - Wall wetting sprinklers (Drenchers) |
AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
AS/NZS 2982:2010 | Laboratory design and construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.