AS 2468-1989
Obsolescent
“Obsolescent” indicates that the Standard is not recommended for new equipment or as a current practice, but it is retained in order to provide for servicing of existing equipment or requirements.
Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-01-1989
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for brazed steel cylinders with no longitudinal joint and not more than two circumferential joints, of water capacity not less than 0.1 kg nor more than 11 kg, which have test pressures from 1750 kPa to 7000 kPa and are intended for the storage and transport of compressed gases in accordance with AS 2030.1.
| Committee |
ME-002
|
| DocumentType |
Standard
|
| ISBN |
0 7262 5298 0
|
| Pages |
15
|
| PublisherName |
Standards Australia
|
| Status |
Obsolescent
|
| Supersedes |
This Standard specifies requirements for brazed steel cylinders with no longitudinal joint and not more than two circumferential joints, of water capacity not less than 0.1 kg nor more than 11 kg, which have test pressures from 1750 kPa to 7000 kPa, and are intended for the storage and transport of compressed gases in accordance with AS 2030.1.NOTES:1. A gas cylinder manufactured by welding but which includes any brazing of or on the pressure-retaining portions is for the purpose of this Standard considered to be a brazed gas cylinder.2. Other Australian Standards for welded gas cylinders are AS 2469, AS 2470, and AS 35773. Appendix A lists the suggested minimum information that should be supplied by the purchaser when ordering gas cylinders to this Standard.
Status changed to obsolescent on 29-10-2004
| AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 2331.3.7-2004 | Methods of test for metallic and related coatings Corrosion and related property test - Corrodkote (Corr) test (ISO 4541:1978, MOD) (Reconfirmed 2017) |
| AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
| AS 2331.3.8-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Humidity test - 24 h cycle, damp heat |
| AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
| AS 2205.3.4-2003 | Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test |
| AS 2205.3.1-2003 | Methods for destructive testing of welds in metal Transverse guided bend test (Reconfirmed 2018) |
| AS 2105-1992 | Inorganic zinc silicate paint |
| AS 2331.3.9-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Metallic coatings - Porosity tests - Ferroxyl test |
| AS 2205.2.1-2003 | Methods for destructive testing of welds in metal Transverse butt tensile test |
| AS 2331.3.2-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Acetic acid salt spray test (ASS test) |
| AS 2337.1-2004 | Gas cylinder test stations General requirements, inspection and tests - Gas cylinders |
| AS 2331.3.6-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Electrographic porosity test |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS 2331.3.3-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Copper accelerated acetic acid salt spray test (CASS test) |
| AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
| AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
| AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
| AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
| AS 2204-1978 | Zinc-rich organic priming paint |
| AS 2470-1995 | Steel cylinders for compressed gases - Welded - 11 kg to 150 kg |
| AS 2469-1998 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg |
| AS 3577-1999 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
| AS/NZS 1596:1997 | Storage and handling of LP Gas |
| AS 2470-1998 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.