AS 2252.2-2009
Current
The latest, up-to-date edition.
Controlled environments Biological safety cabinets Class II - Design
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
02-11-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies basic requirements for Class II laminar flow biological safety cabinets that are intended to provide protection from hazardous biological agents for personnel and the environment and also to protect material use in the cabinet from exogenous contamination.
| Committee |
ME-060
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9290 1
|
| Pages |
15
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies basic requirements for Class II laminar flow biological safety cabinets that are intended to provide protection from hazardous biological agents for personnel and the environment and also to protect material used in the cabinet from exogenous contamination. The cabinets provide protection by inducing an inflow of room air through the work access opening, by delivering recirculated, high efficiency particulate air (HEPA) filtered, laminar flow air downwards through the work zone and by HEPA filtration of exhaust air.It is intended that this Standard be read in conjunction with AS 2252.4 which describes recommended practices for installation and use of these cabinets.NOTES:1 These cabinets are intended only for handling materials that can be inactivated or rendered safe by an effective decontamination procedure such as that described in AS 2252.4 .2 Additional design requirements may apply to cabinets that are required to afford protection against other hazards such as toxic materials not of biological origin or against radiation.3 For work with cytotoxic drugs the user is referred to AS 2252.5.4 Consideration of ergonomics for the design and selection of biological safety cabinets are addressed in Appendix A.
Originated as AS 2252.2-1980.
Previous edition 2004.
Fifth edition 2009.
Reissued incorporating Amendment No. 1 (June 2010).
| AS 1807.13-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of relative humidity in cleanrooms |
| AS 1807.23-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of intensity of radiation from germicidal ultraviolet lamps |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| AS 1807.10-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air pressure of cleanrooms and pharmaceutical isolators |
| AS 1807.26-2004 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air barrier containment of laminar flow safety cabinets - Potassium iodidediscus test |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4260-1997 | High efficiency particulate air (HEPA) filters - Classification, construction and performance (Reconfirmed 2018) |
| AS 1807.22-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air barrier containment of laminar flow safety cabinets |
| AS/NZS 2243.3:2002 | Safety in laboratories Microbiological aspects and containment facilities |
| AS 1807.20-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of sound level at installed workstations, safety cabinets and pharmaceutical isolators |
| AS 1807.12-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of temperature in work zones |
| AS 1807.11-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of airflow parallelism in laminar flow cleanrooms |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 1807.16-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of sound level in cleanrooms |
| AS 1807.1-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air velocity and uniformity of air velocity in clean workstations, laminar flow safety cabinets and pharmaceutical isolators |
| AS 1807.15-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of illuminance |
| AS/NZS 2107:2000 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
| AS 1807.5-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of work zone integrity |
| AS 1807.18-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of vibration in workstations, safety cabinets and pharmaceutical isolators |
| AS 1807.17-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of vibration in cleanrooms |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS 1807.6-2000 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of integrity of terminally mounted HEPA filter installations |
| AS/NZS 2982:2010 | Laboratory design and construction |
| AS/NZS 2243.8:2014 | Safety in laboratories Fume cupboards |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| AS 2252.6-2011 | Controlled environments Clean workstations - Design, installation and use |
| AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.