AS 2030 SUPP 1-1986

1 - SUPP. NO. 1 (JUNE 1986) TO AS 2030 FOREIGN GAS CYLINDER SPECIFICATIONS
3 - PREFACE
4 - CONTENTS
5 - 1 SCOPE.
5 - 2 APPLICATION.
5 - 3 DEFINITIONS.
5 - 4 RESTRICTIONS ON USE OF CYLINDERS.
5 - 5 DESIGN.
5 - 6 COMPLIANCE WITH AS 2030.1.
5 - 7 TEST CERTIFICATES.
5 - 8 HYDROSTATIC STRETCH TEST.
5 - 9 ADDITIONAL INSPECTION.
6 - 10 MARKING OF CYLINDERS.
6 - 11 FILLING CONDITIONS.
6 - 12 FITTINGS.
6 - 12.1 General.
6 - 12.2 Valves.
6 - 12.3 Safety Relief Devices.
6 - 13 PROTECTION OF VALVES.
6 - 14 PROTECTIVE FINISH.
6 - 15 PERIODIC INSPECTION.
6 - 16 MAXIMUM LIFE.
6 - 17 REPORTS.
7 - APPENDIX A - SPECIFICATION HOAL 1 FOR SEAMLESS ALUMINIUM ALLOY CYLINDERS FOR THE CONVEYANCE OF COMPRESSED GASES
7 - QUALITY OF MATERIAL
7 - CHEMICAL COMPOSITION
7 - MARKING OF ALUMINIUM ALLOY
7 - MANUFACTURE OF CYLINDERS.
7 - THICKNESS OF CYLINDER WALLS
8 - THICKNESS OF BASE OF CYLINDER
8 - EXAMINATION OF CYLINDER BEFORE CLOSING-IN
8 - TENSILE TEST
8 - BEND TEST
8 - EXAMINATION OF NECK AND SHOULDER OF CYLINDER
8 - HYDRAULIC STRETCH TEST
9 - RESULTS OF TESTS
9 - PROTECTIVE FINISH
9 - MARKING OF CYLINDERS
9 - FITTINGS
9 - MAINTENANCE
9 - WITHDRAWAL OF CYLINDERS FOR EXAMINATION
10 - APPENDIX B - SPECIFICATION HOAL 2 FOR SEAMLESS ALUMINIUM ALLOY CONTAINERS FOR THE CONVEYANCE OF COMPRESSED GASES
10 - PREAMBLE
10 - SCOPE
10 - QUALITY OF MATERIAL
10 - CHEMICAL COMPOSITION
10 - MARKING OF THE ALUMINIUM ALLOY
10 - MANUFACTURE OF CYLINDERS
10 - THICKNESS OF CYLINDER WALLS
11 - EXAMINATION OF CYLINDER BEFORE CLOSING-IN
11 - TENSILE TEST
11 - BEND TEST
11 - EXAMINATION OF NECK AND SHOULDER OF CYLINDER
11 - HYDRAULIC STRETCH TEST
11 - RESULTS OF TEST
11 - PROTECTIVE FINISH
11 - MARKING OF CYLINDERS
12 - FITTINGS
12 - MAINTENANCE
12 - WITHDRAWAL OF CYLINDERS FOR EXAMINATION
13 - APPENDIX C - SPECIFICATION HOAL 3 FOR SEAMLESS ALUMINIUM ALLOY CONTAINERS FOR THE CONVEYANCE OF COMPRESSED GASES
13 - SCOPE
13 - QUALITY OF MATERIAL
13 - CHEMICAL COMPOSITION
13 - ALUMINIUM ALLOY MAKER'S CERTIFICATE
13 - MARKING OF ALUMINIUM ALLOY
13 - MANUFACTURE OF CONTAINERS
13 - THICKNESS OF CONTAINER WALLS
14 - EXAMINATION OF CONTAINER BEFORE CLOSING-IN
14 - TENSILE TEST
15 - BEND TEST
15 - EXAMINATION OF DEPTH OF FOLDING AT NECK
15 - HYDRAULIC STRETCH TEST
16 - HYDRAULIC TESTING OF PROTOTYPE CONTAINERS
16 - RESULTS OF TESTS
16 - OIL, GREASE, WATER AND OTHER DEPOSITS
16 - PROTECTIVE FINISH
16 - MARKING OF CONTAINERS
17 - FITTINGS
17 - MAINTENANCE
17 - WITHDRAWAL OF CONTAINERS FOR EXAMINATION
18 - APPENDIX D - SPECIFICATION HOAL 4 FOR SEAMLESS ALUMINIUM ALLOY CONTAINERS FOR THE CONVEYANCE OF COMPRESSED GASES
23 - APPENDIX E - SPECIFICATION HOT FOR ALLOY SEAMLESS STEEL CYLINDERS FOR THE CONVEYANCE OF COMPRESSED GASES
23 - SCOPE
23 - QUALITY OF MATERIAL
23 - CHEMICAL COMPOSITION
24 - STEEL MAKER' S CERTIFICATE
24 - MARKING OF STEEL
24 - MANUFACTURE OF CYLINDERS
24 - THICKNESS OF CYLINDER WALLS
24 - EXAMINATION OF CYLINDER BEFORE CLOSING-IN
24 - HEAT TREATMENT
24 - TENSILE TESTS
25 - NOTCHED BAR IMPACT TEST
25 - BEND TEST
25 - HYDRAULIC STRETCH TEST
25 - RESULTS OF TESTS
25 - RE-HEAT TREATMENT
25 - MARKING
18 - QUALITY OF MATERIAL
18 - CHEMICAL COMPOSITION
18 - ALUMINIUM ALLOY MAKER'S CERTIFICATE
18 - MARKING OF ALUMINIUM ALLOY
18 - MANUFACTURE OF CONTAINERS
18 - THICKNESS OF CONTAINER WALLS
19 - EXAMINATION OF CONTAINER BEFORE CLOSING-IN
19 - TENSILE TEST
20 - BEND TEST
20 - EXAMINATION OF DEPTH OF FOLDING AT NECK
20 - HYDRAULIC STRETCH TEST
20 - HYDRAULIC TESTING OF PROTOTYPE CONTAINERS
21 - RESULTS OF TESTS
21 - OIL, GREASE, WATER AND OTHER DEPOSITS
21 - PROTECTIVE FINISH
21 - MARKING OF CONTAINERS
21 - FITTINGS
22 - MAINTENANCE
22 - WITHDRAWAL OF CONTAINERS FOR EXAMINATION
27 - APPENDIX F - SPECIFICATION HOLASW 1 FOR LIGHT WEIGHT ALLOY STEEL WELDED CONTAINERS FOR THE CONVEYANCE OF COMPRESSED GASES
27 - SCOPE
27 - QUALITY OF MATERIAL
27 - CHEMICAL COMPOSITION
27 - STEEL MAKER'S CERTIFICATE
27 - MARKING OF STEEL
27 - FUSION WELDED
27 - MANUFACTURE OF CONTAINERS
28 - THICKNESS OF CONTAINER WALLS
28 - NOMENCLATURE
28 - THICKNESS OF END CAPS
29 - EXAMINATION OF COMPONENTS OF CONTAINERS BEFORE WELDING
29 - PREPARATION OF EDGES
29 - TYPES OF WELDED JOINTS
29 - METHOD OF MAKING WELDED JOINTS
29 - RADIOGRAPHIC EXAMINATION
30 - HEAT TREATMENT
30 - TENSILE TESTS
30 - HARDNESS
30 - BEND TEST
31 - HYDRAULIC STRETCH TEST
31 - BURST TEST
31 - RESULTS OF TESTS
32 - CLEANING
32 - CORROSION PROTECTION
32 - MARKING
32 - WITHDRAWAL OF CYLINDERS FOR EXAMINATION
32 - MAXIMUM SERVICE LIFE
37 - APPENDIX G - RADIOGRAPHIC EXAMINATION OF HOLASW 1 AND DOT 4E CYLINDERS
37 - RADIOGRAPHIC EXAMINATION.
37 - 1.1 General.
37 - 1.2 Acceptance Standards.
37 - 1.3 Repair.
40 - APPENDIX H - SPECIFICATION HOLASS 1 FOR LIGHTWEIGHT ALLOY SEAMLESS STEEL CONTAINERS FOR THE CONVEYANCE OF COMPRESSED GASES
40 - SCOPE
40 - QUALITY OF MATERIAL
40 - CHEMICAL COMPOSITION
40 - STEELMAKER'S CERTIFICATE
40 - MARKING OF STEEL
40 - MANUFACTURE OF CONTAINERS
40 - THICKNESS OF CONTAINER WALLS
41 - EXAMINATION OF CONTAINER BEFORE CLOSING-IN
41 - EXAMINATION FOR INTERNAL FOLDS IN THE NECK
41 - HEAT TREATMENT
41 - HARDNESS TEST
41 - TENSILE TEST
42 - BEND TEST
42 - HYDRAULIC STRETCH TEST
42 - BURST TEST
42 - RE-HEAT TREATMENT
42 - RESULTS OF TESTS
42 - CORROSION PROTECTION
43 - MARKING
43 - WITHDRAWAL OF CONTAINERS FOR EXAMINATION
44 - APPENDIX J - COMPRESSED GASES APPROVED FOR USE WITH ALUMINIUM ALLOY CYLINDER MANUFACTURED TO (BRITISH) HOME OFFICE SPECIFICATION

Sets out conditions and limitations of acceptance for certain foreign gas cylinder specifications intended to be used under the terms of AS 2030.

This supplement to AS 2030 prescribes the conditions, additional requirements and modifications applying to cylinders manufactured to certain foreign specifications, so that the cylinders may be deemed to comply with AS 2030 for use in Australia. The cylinder specifications included in this supplement are as follows:(a) (British) Home Office Specification HOAL 1-Seamless Aluminium Alloy Cylinders (see Appendix A).(b) (British) Home Office Specification HOAL 2-Seamless Aluminium Alloy Cylinders (see Appendix B).(c) (British) Home Office Specification HOAL 3-Seamless Aluminium Alloy Cylinders (see Appendix C).(d) (British) Home Office Specification HOAL 4-Seamless Aluminium Alloy Cylinders (see Appendix D).(e) (British) Home Office Specification HOT-Alloy Seamless Steel Cylinders (see Appendix E).(f) (British) Home Office Specification HOLASW 1-Lightweight Alloy Steel Welded Containers (see Appendix F).(g) (British) Home Office Specification HOLASS 1-Lightweight Alloy Seamless Steel Containers (see Appendix H).This supplement is intended to permit the use in Australia of cylinders manufactured overseas to certain foreign specifications.In addition, this supplement may provide specifications for manufacture of cylinders within Australia, but such manufacture should only be with the specific approval of the relevant Statutory Authority, and only within the currency of the particular specification.NOTE: All (British) Home Office Specifications listed herein are no longer current, having been superseded by British standards.