AS 1901-2004
Current
The latest, up-to-date edition.
Electroplated coatings - Gold and gold alloys
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
29-10-2004
Specifies the requirements for electrodeposted coatings (single-layer or multi-layer) of gold and its alloys for electrical, electronic and other engineering applications on metallic and non-metallic materials.
Committee |
MT-009
|
DocumentType |
Standard
|
ISBN |
0 7337 6330 8
|
Pages |
39
|
ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for electrodeposited coatings including composition (single-layer or multi-layer) for gold and its alloys for electrical, electronic and other engineering applications, as well as for decorative purposes, on metallic and non-metallic materials.In the case of double-layer and multi-layer coatings, the thickness requirements apply to the total gold or gold alloy coating, but the requirements for gold content apply to each layer. Appendix A sets out information to be supplied by the purchaser to the electroplater.NOTES:1 Appendix B shows a means of demonstrating compliance to this Standard.2 Appendix C lists a number of applications for electrodeposited gold coatings.3 Appendix F discusses electrolytes and associated factors which affect electrodeposited gold and gold alloy coatings.
Originated in part as AS K158-1967.
Previous edition AS 1901-1993.
Third edition 2004.
AS 2483-2003 | Metal finishing - Recommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) |
AS 4108-2005 | Metal finishing - Glossary of terms in electroplating and related processes (Reconfirmed 2017) |
AS 2331.1.6-2004 | Methods of test for metallic and related coatings Local thickness tests - Taper section method |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS 2400.6-1986 | SAA Packaging code Paper and paperboard (Reconfirmed 2016) |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 4108-1993 | Metal finishing - Glossary of terms used in electroplating and related processes |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2331.4.5-2001 | Methods of test for metallic and related coatings Physical tests - Electroplated plastics - Thermal cycling tests |
AS 2331.1.2-2001 | Methods of test for metallic and related coatings Local thickness tests - Coulometric method (Reconfirmed 2017) |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 2331.1.5-2001 | Methods of test for metallic and related coatings Local thickness tests - Beta-backscatter method |
AS 2400.21-1986 | Packaging - Packaging of dangerous goods |
AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
AS 1627.1-2003 | Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017) |
AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.