AS 1531-1991
Current
The latest, up-to-date edition.
Conductors - Bare overhead - Aluminium and aluminium alloy (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
10-06-1991
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Sets out requirements and tests necessary for homogeneous bare electrical conductors for overhead power transmission and constructed of all aluminium and aluminium alloy wires. A range of wire sizes, 2.50mm to 4.75mm, and their properties are provided.
| Committee |
EL/10
|
| DocumentType |
Standard
|
| ISBN |
0 7262 6881 X
|
| Pages |
12
|
| ProductNote |
Reconfirmed 27/05/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements and tests for homogeneous bare electrical conductors for overhead power transmission, and constructed of all aluminium or all aluminium alloy wires.NOTES:1 Appendix A gives methods to calculate conductor properties.2 Appendix B gives the coefficient of linear expansion and the theoretical basis for the calculation of modulus of elasticity.3 Appendix C lists code names which may be used to refer to specific type and construction of conductor.4 Appendix D lists information which should be supplied with enquiries and orders for conductors.
AS 1531 first published as part of AS C75-1936 (endorsement of BS 215-1932 without amendment).
AS C75-1936 revised and redesignated in part as AS C75.2-1965.
Revised and redesignated AS 1531.1-1974.
AS C75.3 first published 1965.
Revised and redesignated AS 1531.2-1974.
AS 1531.3 first published 1984.
AS 1531.1-1974, AS 1531.2-1974 and AS 1531.3-1984 revised, amalgamated and redesignated AS 1531-1991.
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 2505.5-1982 | Methods for bend and related testing of metals - Torsion and wrapping tests on wire |
| AS/NZS 2857:1996 | Timber drums for insulated electric cables and bare conductors |
| AS 2857-1986 | Timber drums for insulated electric cables and bare conductors |
| AS 2505.5-2002 | Metallic materials Wire - Simple torsion test |
| AS 2848.1-1998 | Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018) |
| AS 1391-1991 | Methods for tensile testing of metals |
| AS C365.2-1970 | Drums for bare stranded conductors - Metal drums |
| AS/NZS 3599.2:1999 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
| AS 3822(INT)-1998 | Test methods for bare overhead conductors |
| AS/NZS 1768:2007 | Lightning protection |
| AS/NZS 7000:2016 | Overhead line design |
| AS/NZS 3008.1.1:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS 3822-2002 | Test methods for bare overhead conductors |
| HB 331-2012 | Overhead line design |
| AS/NZS 3008.1.2:2010 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
| DR 00391 | Conductors - Covered overhead - For working voltages 6.35/11(12)kV up to and including 19/33(36)kV |
| AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
| AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
| AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS/NZS 3675:2002 | Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV (Reconfirmed 2017) |
| AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS/NZS 3008.1.2:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
| AS 3675-1993 | Conductors - Covered overhead - For working voltages 6.35/11 kV up to and including 19/33 kV |
| AS/NZS 1768(INT):2003 | Lightning protection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.