AS 1418.1-2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cranes, hoists and winches General requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
24-07-2024
20-06-2002
Specifies general requirements for cranes as defined in AS2549. Includes the design of cranes by the traditional working stress method and also allows design by the limit states method. No set of generally accepted partial load factors necessary for crane design by the limit states method are available.
Committee |
ME-005
|
DocumentType |
Standard
|
ISBN |
0 7337 4372 2
|
Pages |
165
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies the general requirements for cranes, hoists, winches, and their components, and appliances intended to carry out similar functions, as defined in AS 2549. It does not include powered industrial trucks as defined in AS 2359.The term ‘crane’ used herein applies to a crane, hoist or winch as appropriate.NOTES: 1 Specific requirements for particular types of cranes and associated equipment are specified in other parts of AS 1418; these requirements take precedence over corresponding requirements in this Standard where any difference exists. Appendix A outlines the structure of the AS 1418 series of Standards.2 Requirements for the selection, operation and maintenance of cranes are given in the appropriate part of AS 2550.
Originated as part of AS CB2-1938.
Previous edition 1994.
Fourth edition 2002.
Reissued incorporating Amendment No.1 (November 2004)
AS/NZS 2080:1995 | Safety glass for land vehicles |
AS/NZS 1801:1997 | Occupational protective helmets |
AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
AS 4171-1994 | Rolling bearings - Static load ratings |
AS/NZS 1359.102.3:2000 | Rotating electrical machines - General requirements - Methods for determining losses and efficiency - Three-phase cage induction motors |
AS/NZS 1269.3:1998 | Occupational noise management - Hearing protector program |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS/NZS 2381.2:2006 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure d |
AS/NZS 61000.6.2:2002 | Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments |
AS 1170.2-1989 | Minimum design loads on structures (known as the SAA Loading Code) Wind loads |
AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
AS/NZS 3947.4.3:2000 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads |
AS 2381.7-1989 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance Intrinsic safety i |
AS 3859-1991 | Effects of current passing through the human body |
AS/NZS 61000.2.5:1999 | Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016) |
AS 4041-1998 | Pressure piping |
AS/NZS 1841.5:2007 | Portable fire extinguishers Specific requirements for powder type extinguishers (Reconfirmed 2021) |
AS 1831-2002 | Ductile cast iron |
AS 4142.3-1993 | Fibre ropes Man-made fibre rope for static life rescue lines |
AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
AS/NZS 61000.3.3:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A |
AS 2074-1982 | Steel castings |
AS 2550-1982 | Cranes - Mobile, tower and derrick - Selection and operation |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 2549-1996 | Cranes (including hoists and winches) - Glossary of terms |
AS 1250-1981 | The use of steel in structures (known as the SAA Steel Structures Code) |
HB 13-2000 | Electrical equipment for hazardous areas |
AS 3608-1989 | Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c. |
AS 2019-1986 | Fluid power - Hydraulic and pneumatic cylinders - Bore and rod dimensions |
AS 3007.1-1987 | Electrical installations - Surface mines and associated processing plant - Scope and definitions |
AS 1832-2007 | Malleable cast iron (Reconfirmed 2017) |
AS 2550.4-1994 | Cranes - Safe use Tower cranes |
AS 1418.3-1997 | Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016) |
AS/NZS 1554.4:1995 | Structural steel welding - Welding of high strength quenched and tempered steels |
AS 1720.1-1997 | Timber structures Design methods |
AS 1170.1-1989 | Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads and load combinations |
AS/NZS 61000.3.7:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD) |
AS 2550.10-1994 | Cranes - Safe use - Elevating work platforms |
AS 2321-2006 | Short-link chain for lifting purposes |
AS 1448-1981 | Carbon steels and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS/NZS 3947.3:2001 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
AS 4142.2-1993 | Fibre ropes Three-strand hawser-laid and eight-strand plaited |
AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
AS 3007.2-1987 | Electrical installations - Surface mines and associated processing plant - General protection requirements |
AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
AS 2550.5-1993 | Cranes - Safe use - Mobile and vehicle-loading cranes |
AS 2841-2005 | Galvanized steel wire strand (Reconfirmed 2016) |
AS/NZS 61000.3.5:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
AS/NZS 1554.5:1995 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 4142.1-1993 | Fibre ropes Care and safe usage |
AS/NZS 2381.1:1999 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements |
AS 1418.5-1995 | Cranes (including hoists and winches) Mobile and vehicle-loading cranes |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS 2550.13-1997 | Cranes - Safe use Building maintenance units |
AS/NZS 61000.4.1:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of immunity tests |
AS 2550.16-1997 | Cranes - Safe use Mast climbing work platforms |
AS/NZS 2080:2006 | Safety glazing for land vehicles |
AS 3608-2005 | Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c. |
AS 3007.1-2004 | Electrical installations - Surface mines and associated processing plant - Scope and definitions |
AS/NZS 1554.6:1994 | Structural steel welding - Welding stainless steels for structural purposes |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 1768-1991 | Lightning protection |
AS 3776-2006 | Lifting components for Grade T chain slings |
AS/NZS 3947.1:2001 | Low-voltage switchgear and controlgear General rules |
AS 1438.1-1998 | Wire-coil flat slings Product specification |
AS/NZS 1418.9:1996 | Cranes (including hoists and winches) Vehicle hoists |
AS 1403-2004 | Design of rotating steel shafts (Reconfirmed 2016) |
AS/NZS 1269.1:1998 | Occupational noise management - Measurement and assessment of noise immission and exposure |
AS/NZS 61000.2.3:1999 | Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016) |
AS 2550.6-1995 | Cranes - Safe use Guided storing and retrieving appliances (Reconfirmed 2018) |
AS 1210-1997 | Pressure vessels |
AS 1353.1-1997 | Flat synthetic-webbing slings Product specification (Reconfirmed 2014) |
AS 1418.13-1996 | Cranes (including hoists and winches) Building maintenance units |
AS 2550.15-1994 | Cranes - Safe use - Concrete placing equipment |
AS 1101.1-1993 | Graphic symbols for general engineering - Hydraulic and pneumatic systems |
AS 1418.16-1997 | Cranes (including hoists and winches) Mast climbing work platforms |
AS/NZS 1170.2:2002 | Structural design actions Wind actions |
AS 2670.1-2001 | Evaluation of human exposure to whole-body vibration General requirements (Reconfirmed 2016) |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS/NZS 1269.4:1998 | Occupational noise management - Auditory assessment |
AS 1380.1-1998 | Fibre-rope slings - Product specification |
AS 2740-2001 | Wedge-type sockets |
AS 1418.10-1996 | Cranes (including hoists and winches) - Elevating work platforms |
AS/NZS 1841.6:1997 | Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers |
AS/NZS 1841.6:2007 | Portable fire extinguishers Specific requirements for carbon dioxide type extinguishers (Reconfirmed 2021) |
AS/NZS 2550.9:1996 | Cranes - Safe use Vehicle hoists |
AS/NZS 1269.2:1998 | Occupational noise management - Noise control management |
AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
AS 1418.18-2001 | Cranes, hoists and winches Crane runways and monorails |
AS 2381.2-1993 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure d |
AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
AS 3569-1989 | Steel wire ropes |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 1726-1993 | Geotechnical site investigations |
AS 2074-2003 | Cast steels |
AS/NZS 61000.3.2:1998 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) |
AS 2430.2-1986 | Classification of hazardous areas - Combustible dusts |
AS 2076-1996 | Wire-rope grips for non-lifting applications |
AS 1353.2-1997 | Flat synthetic-webbing slings Care and use |
AS/NZS 61241.3:1999 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
AS/NZS 61000.4.6:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
AS/NZS 1891.2:2001 | Industrial fall-arrest systems and devices Horizontal lifeline and rail systems |
AS/NZS 1841.7:1997 | Portable fire extinguishers - Specific requirements for vaporizing-liquid type extinguishers |
AS 1418.17-1996 | Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016) |
HB 13-2007 | Electrical equipment for hazardous areas |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 2729-1994 | Rolling bearings - Dynamic load ratings and rating life |
AS 1288-1994 | Glass in buildings - Selection and installation |
AS 2550.1-2002 | Cranes, hoists and winches - Safe use General requirements |
AS 1418.15-1994 | Cranes (including hoists and winches) - Concrete placing equipment |
AS/NZS 1269.0:1998 | Occupational noise management Overview |
AS 3108-1990 | Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers |
AS/NZS 3108:1994 | Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers |
AS 1085.1-2000 | Railway permanent way material Steel rails |
AS/NZS 1841.5:1997 | Portable fire extinguishers - Specific requirements for powder type extinguishers |
AS 3775-1990 | Chain slings - Grade T |
AS 1055.2-1997 | Acoustics - Description and measurement of environmental noise Application to specific situations |
AS 2430.3-1991 | Classification of hazardous areas - Specific occupancies |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS/NZS 61000.4.7:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
AS 1418.4-2001 | Cranes (including hoists and winches) - Tower cranes |
AS 2381.6-1993 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance Increased safety e |
AS/NZS 3947.5.1:2000 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
AS/NZS 1891.3:1997 | Industrial fall-arrest systems and devices - Fall-arrest devices |
AS 3007.3-2004 | Electrical installations - Surface mines and associated processing plant General requirements for equipment and ancillaries |
AS 1418.12-1991 | Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016) |
AS 2752-2003 | Preferred numbers and their use |
AS 1269-1989 | Acoustics - Hearing conservation |
AS 1666.2-1995 | Wire-rope slings - Care and use |
AS 3600-2001 | Concrete structures |
AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
AS 1666.1-1995 | Wire-rope slings - Product specification |
AS 2759-2004 | Steel wire rope - Use, operation and maintenance |
AS 1418.7-1999 | Cranes (including hoists and winches) Builders hoists and associated equipment |
AS/NZS 61000.1.1:2000 | Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016) |
AS 1138-1992 | Thimbles for wire rope |
AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
AS 1418.2-1997 | Cranes (including hoists and winches) Serial hoists and winches |
AS/NZS 1800:1998 | Occupational protective helmets - Selection, care and use |
AS 2318-1990 | Swivels for hoists |
AS 3585-1990 | End fittings for flat-webbing slings |
AS 2430.1-1987 | Classification of hazardous areas - Explosive gas atmospheres |
AS 2319-2001 | Rigging screws and turnbuckles |
AS/NZS 1664.2:1997 | Aluminium structures Allowable stress design (Reconfirmed 2020) |
AS 3890-1991 | Rolling bearings - System life and reliability |
AS/NZS 61000.4.3:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test |
AS 2670.3-1990 | Evaluation of human exposure to whole-body vibration - Evaluation of exposure to whole-body Z-axis vertical vibration in the frequency range 0.1 to 0.63 Hz |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 2670.2-1990 | Evaluation of human exposure to whole-body vibration - Continuous and shock-induced vibration in buildings (1 to 80 Hz) |
AS/NZS 1768:2007 | Lightning protection |
AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 2670.4-2001 | Evaluation of human exposure to whole-body vibration Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
AS 2317-1998 | Collared eyebolts |
AS/NZS 1891.1:1995 | Industrial fall-arrest systems and devices Safety belts and harnesses |
AS/NZS 3100:1997 | Approval and test specification - General requirements for electrical equipment |
AS 1163-1991 | Structural steel hollow sections |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS/NZS 61000.3.6:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD) |
AS 1680-1976 | Code of practice for interior lighting and the visual environment |
AS 2550.7-1996 | Cranes - Safe use Builders' hoists and associated equipment |
AS 1288-2006 | Glass in buildings - Selection and installation |
AS 3679.1-1990 | Structural steel - Hot-rolled bars and sections |
AS 2670-1983 | Vibration and shock - Guide to the evaluation of human exposure to whole body vibration |
AS/NZS 1891.4:2000 | Industrial fall-arrest systems and devices Selection, use and maintenance |
AS/NZS 3947.4.2:2000 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
AS 1380.2-1998 | Fibre-rope slings - Care and use |
AS 3791-1991 | Hydraulic hose |
AS/NZS 3947.4.1:2001 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
AS 1438.2-1998 | Wire-coil flat slings Care and use (Reconfirmed 2014) |
AS/NZS 61000.4.5:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
AS 3007.2-2004 | Electrical installations - Surface mines and associated processing plant - General protection requirements |
AS 1101.1-2007 | Graphic symbols for general engineering Hydraulic and pneumatic systems |
AS 4024.1-1996 | Safeguarding of machinery General principles |
AS/NZS 1841.7:2007 | Portable fire extinguishers Specific requirements for vaporizing liquid type extinguishers (Reconfirmed 2021) |
AS 1029.1-1985 | Low voltage contactors - Electromechanical (up to and including 1000 V a.c. and 1200 V d.c.) |
AS 1403-1985 | Design of rotating steel shafts |
AS 1830-2002 | Grey cast iron |
AS 1832-2002 | Malleable cast iron |
AS/NZS 1554.1:2000 | Structural steel welding Welding of steel structures |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS 1418.8-1989 | Cranes (including hoists and winches) (known as the SAA Crane Code) - Special purpose appliances |
AS/NZS 1359.5:2000 | Rotating electrical machines - General requirements Three-phase cage induction motors - High efficiency and minimum energy performance standards requirements |
AS 1418.6-1988 | Cranes (including hoists and winches) (known as the SAA Crane Code) - Guided storing and retrieving appliances |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 3007.3-1987 | Electrical installations - Surface mines and associated processing plant - General requirements for equipment and ancillaries |
AS 1418.3-1997 | Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016) |
AS 2550.1-2011 | Cranes, hoists and winches - Safe use General requirements |
AS 1418.19-2007 | Cranes, hoists and winches Telescopic handlers |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 1418.5-2002 | Cranes, hoists and winches Mobile cranes |
AS 2740-2001 | Wedge-type sockets |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS 1666.2-1995 | Wire-rope slings - Care and use |
AS 2321-2006 | Short-link chain for lifting purposes |
AS 4797-2009 | Stainless steel chain for lifting purposes (Reconfirmed 2019) |
AS 1138-1992 | Thimbles for wire rope |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 2550.15-1994 | Cranes - Safe use - Concrete placing equipment |
AS 4324.1-1995 | Mobile equipment for continuous handling of bulk materials - General requirements for the design of steel structures |
AS 1485-1983 | Safety and health in workrooms of educational establishments |
AS 2550.11-2004 | Cranes, hoists and winches - Safe use Vehicle-loading cranes |
AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
AS 1418.15-1994 | Cranes (including hoists and winches) - Concrete placing equipment |
AS 2759-2004 | Steel wire rope - Use, operation and maintenance |
AS 1666.2-2009 | Wire-rope slings Care and use (Reconfirmed 2019) |
AS 1418.8-2008 | Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018) |
AS/NZS 1418.10:2011 | Cranes, hoists and winches Mobile elevating work platforms |
AS/NZS 2550.9:1996 | Cranes - Safe use Vehicle hoists |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 1418.12-1991 | Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016) |
AS 5804.1-2010 | High-voltage live working General |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 4991-2004 | Lifting devices |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS 1418.11-2004 | Cranes, hoists and winches - Vehicle-loading cranes |
AS 2550.5-2002 | Cranes, hoists and winches - Safe use - Mobile cranes |
AS 2550.20-2005 | Cranes, hoists and winches - Safe use Self-erecting tower cranes |
AS 2550.3-2002 | Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes |
AS 1418.2-1997 | Cranes (including hoists and winches) Serial hoists and winches |
AS/NZS 1418.9:1996 | Cranes (including hoists and winches) Vehicle hoists |
AS 1418.11-2007 | Cranes, hoists and winches - Vehicle-loading cranes |
AS 3533.1-2009 | Amusement rides and devices Design and construction |
AS 2317-1998 | Collared eyebolts |
AS 1576.4-1991 | Scaffolding Suspended scaffolding |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 1418.4-2004 | Cranes, hoists and winches Tower cranes |
AS 1418.13-1996 | Cranes (including hoists and winches) Building maintenance units |
AS 1418.17-1996 | Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016) |
AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding (Reconfirmed 2024) |
AS 3785.5-1998 | Underground mining - Shaft equipment Headframes |
AS 3585-1990 | End fittings for flat-webbing slings |
AS 1418.8-2002 | Cranes, hoists and winches - Special purpose appliances |
AS 2601-2001 | The demolition of structures |
AS 1418.7-1999 | Cranes (including hoists and winches) Builders hoists and associated equipment |
AS 2321:2014 | Short-link chain for lifting purposes |
AS 2550.1-2002 | Cranes, hoists and winches - Safe use General requirements |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 3962-2001 | Guidelines for design of marinas |
AS 1418.6-2004 | Cranes, hoists and winches Guided storing and retrieving appliances (Reconfirmed 2018) |
AS 2550.10-2006 | Cranes, hoists and winches - Safe use Mobile elevating work platforms |
AS 4324.1:2017 | Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS 3775.2-2004 | Chain slings - Grade T Care and use |
AS 5804.4-2010 | High-voltage live working Barehand work |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.