AS 1210 SUPP 1-1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
09-07-2024
English
02-04-1990
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for design and construction of pressure vessels in which material design strengths higher than those specified in AS 1210 are permitted. It applies only to static vessels, and specifies only those requirements which differ from or are additional to the requirements for Class 1 vessels in AS 1210. Two new classes (2HA and 2HB) of vessels are introduced.
| Committee |
ME-001
|
| DocumentType |
Supplement (Main)
|
| ISBN |
0 7262 6003 7
|
| Pages |
37
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
Clause 1.1 applies with the following additions: Supplement 1 (hereafter referred to as 'the Supplement' or 'this Supplement') specifies requirements for two additional classes of vessel identified as Class 1H and Class 2H with the latter further subdivided into classifications 2HA and 2HB, and for cast and forged vessels, which -(a) utilize advanced design and construction methods;(b) generally permit design strengths higher than those specified in AS 1210; and(c) comply with the requirements specified in AS 1210 for cast, forged or Class 1 welded vessels as appropriate, except as modified by this Supplement. This Supplement does not apply to transportable vessels nor does it apply to vessels of riveted or brazed construction. Only those requirements which supplement or differ from those specified in AS 1210 for cast, forged or Class 1 welded construction are specified in this Supplement.
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 1710-2007 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification (Reconfirmed 2017) |
| AS 1065-1988 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022) |
| AS 1210-1997 | Pressure vessels |
| AS 1548-1995 | Steel plates for pressure equipment |
| AS/NZS 1200:2000 | Pressure equipment |
| AS/NZS 1715:2009 | Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024) |
| AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
| AS/NZS 4645.2:2008 | Gas distribution networks Steel pipe systems |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS 2885.0-2008 | Pipelines - Gas and liquid petroleum General requirements |
| AS/NZS 2739:2009 | Natural gas (NG) fuel systems for vehicle engines |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 1796-1993 | Certification of welders and welding supervisors |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS/NZS 2299.1:2007 | Occupational diving operations Standard operational practice |
| AS 1228-2006 | Pressure equipment - Boilers |
| AS/NZS 4645.1:2008 | Gas distribution networks Network management |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 2809.3-2008 | Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gases |
| AS/NZS 1200:1994 | Pressure equipment |
| AS 1418.8-2008 | Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018) |
| AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
| AS 2746-2008 | Working areas for gas-fuelled vehicles |
| AS/NZS 3788:1996 | Pressure equipment - In-service inspection |
| AS 2885.2-2007 | Pipelines - Gas and liquid petroleum Welding |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS 3780-2008 | The storage and handling of corrosive substances |
| AS 3533.1-1997 | Amusement rides and devices Design and construction |
| AS 2885.1-2007 | Pipelines - Gas and liquid petroleum Design and construction |
| AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
| AS/NZS 2843.1:2006 | Timber preservation plants Timber preservation plant site design (Reconfirmed 2016) |
| AS 5062-2006 | Fire protection for mobile and transportable equipment |
| AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
| AS/NZS 1425:2007 | LP Gas fuel systems for vehicle engines |
| AS 3533.1-2009 | Amusement rides and devices Design and construction |
| AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
| AS/NZS 1596:2008 | The storage and handling of LP Gas |
| AS 3857-1999 | Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016) |
| AS 1210-1997 | Pressure vessels |
| AS 4738.1-2007 | Metal castings Ferrous sand moulded |
| AS 3597-2008 | Structural and pressure vessel steel - Quenched and tempered plate |
| AS 4983-2010 | Gas fuel systems for forklifts and industrial engines |
| AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
| AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
| AS/NZS 2843.2:2006 | Timber preservation plants Treatment area operation (Reconfirmed 2016) |
| AS/NZS 3788:2001 | Pressure equipment - In-service inspection |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
| AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.