API TR 17TR8 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
26-02-2021
Superseded by
Language(s)
English
Published date
01-03-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative References
3 Terms, Definitions, Acronyms, Abbreviations, and
Symbols
4 Addressing Issues Posed in API Technical
Report 1PER15K-1
5 Design Verification
6 Materials for High-pressure High-temperature
Equipment
7 Seals and Bolting/Fasteners
8 Design Validation
9 Hydrostatic Body Test for High-pressure
High-temperature Equipment
Annex A (informative) - Load Monitoring
Annex B (informative) - Material Selection
Annex C (normative) - Material Quality Control
Annex D (informative) - Material Characterization Protocols
Annex E (informative) - Strain Limit Damage Material Evaluation
Bibliography
Gives design guideline for high-pressure high-temperature (HPHT) equipment, specifically for subsea applications.
| DocumentType |
Standard
|
| Pages |
1222
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria New child ADD 1 2019 is added.
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API SPEC 6A:2018+ERR 5:2024 | Specification for Wellhead and Tree Equipment |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| MIL HDBK 5 : G_VOL2 | METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES |
| ASTM E 328 : 2013 : REDLINE | Standard Test Methods for Stress Relaxation Tests for Materials and Structures |
| BS 7608:1993 | Code of practice for fatigue design and assessment of steel structures |
| ISO 2921:2011 | Rubber, vulcanized Determination of low-temperature retraction (TR test) |
| NACE TM 01 87 : 2011 | EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
| API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ASTM A 833 : 2008 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM A 923 : 2014 : REDLINE | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM E 562 : 2011 : REDLINE | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| API 6J1 : 2000 | ELASTOMER LIFE ESTIMATION TESTING PROCEDURES |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 899:1981 | Plastics — Determination of tensile creep |
| ASTM D 6147 : 1997 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
| ASME PV CODE 2 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET) |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ASTM D 1238 : 2013 : REDLINE | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASME B31.3:2016 | PROCESS PIPING |
| ANSI B11 : 2008 | GENERAL SAFETY REQUIREMENTS COMMON TO ANSI B11 MACHINES |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ASTM G 78 : 2015 : REDLINE | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| NACE SP 01 76 : 2007 | CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM E 768 : 1999 : R2018 | Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| NACE TM 01 98 : 2016 | SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| API TR 6MET : 2010 | METALLIC MATERIAL LIMITS FOR WELLHEAD EQUIPMENT USED IN HIGH TEMPERATURE FOR API 6A AND 17D APPLICATIONS |
| ISO 13879:1999 | Petroleum and natural gas industries — Content and drafting of a functional specification |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ASTM D 1525 : 2017 | Standard Test Method for Vicat Softening Temperature of Plastics |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| ISO 4664:1998 | Rubber Guide to the determination of dynamic properties |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| API 20F : 2015 | CORROSION RESISTANT BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| ISO 13880:1999 | Petroleum and natural gas industries — Content and drafting of a technical specification |
| ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM D 696 : 2016 : REDLINE | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| API 6AB : 1ED 83 | SPECIFICATION FOR 30000 PSI WELLHEAD EQUIPMENT |
| ASTM E 999 : 2015 : REDLINE | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 6914:2013 | Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| API 20B : 2013 | OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API TR 17TR5 : 2012 | AVOIDANCE OF BLOCKAGES IN SUBSEA PRODUCTION CONTROL AND CHEMICAL INJECTION SYSTEMS |
| ISO 62:2008 | Plastics Determination of water absorption |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ASTM D 4065 : 2012 : REDLINE | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
| ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| ASTM E 2760 : 2016 : REDLINE | Standard Test Method for Creep-Fatigue Crack Growth Testing |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| BS EN 473:2008 | Non-destructive testing. Qualification and certification of NDT personnel. General principles |
| ASTM E 571 : 2012 : REDLINE | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| ASTM E 1382 : 1997 | Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| API 6X : 2014 | DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| API RP 17N : 2017 | RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| API 20C : 2015 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.