API RP 74 : 2001 : R2013
Current
The latest, up-to-date edition.
RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
Hardcopy , PDF
English
01-10-2001
1 GENERAL
2 REFERENCES
3 DEFINITIONS AND ACRONYMS
4 SAFETY
5 CONTRACTOR SAFETY AND TRAINING
6 SAFE WORK PRACTICES
7 DESIGN
8 TRAINING
9 PROCEDURES
10 MAINTENANCE
11 INCIDENT INVESTIGATION
12 EMERGENCY RESPONSE
13 SPECIAL OPERATIONS
APPENDIX A - EXAMPLE LEASE PRODUCTION SAFETY CHECKLIST
APPENDIX B - EXAMPLE COMPRESSOR/BOOSTER STATIONS
SAFETY CHECKLIST
Provides practices and procedures for promotion and maintenance of safe working conditions for personnel engaged in onshore oil and gas production, including special services.
| DocumentType |
Standard
|
| Pages |
36
|
| ProductNote |
Reconfirmed 2013 This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Current
|
| Supersedes |
| API STD 12R1:2025 | Installation, Operation, Maintenance, Inspection, and Repair of Tanks in Production Service |
| API 75 : 2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API SPEC 12J : 2008 | SPECIFICATION FOR OIL AND GAS SEPARATORS |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| API 761 : 3ED 2001 | MODEL RISK MANAGEMENT PLAN GUIDANCE FOR EXPLORATION AND PRODUCTION FACILITIES - GUIDANCE FOR COMPLYING WITH EPA'S RMP RULE (40 CODE OF FEDERAL REGULATIONS PART 68) |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| API 9100 : 1998 | MODEL ENVIRONMENTAL, HEALTH & SAFETY (EHS) - MANAGEMENT SYSTEM AND GUIDANCE DOCUMENT |
| API SPEC 11E : 2013 | SPECIFICATION FOR PUMPING UNITS |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| API 750 : 1990 | MANAGEMENT OF PROCESS HAZARDS |
| ANSI/ASSE Z359.1 : 2007 | THE FALL PROTECTION CODE |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| ISEA Z89.1 : 2014 | INDUSTRIAL HEAD PROTECTION |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| API SPEC 12K : 2008 | SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS |
| NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
| ANSI/ASA S1.26 : 2014 | METHOD FOR CALCULATION OF THE ABSORPTION OF SOUND BY THE ATMOSPHERE |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ANSI S12.36 : 0 | SURVEY METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| ANSI Z358.1 : 2014 | EMERGENCY EYEWASH AND SHOWER EQUIPMENT |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ANSI Z87.1 : 2015 | OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES |
| API 1107 : 1991 | PIPELINE MAINTENANCE WELDING PRACTICES |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| ASME PV CODE 8 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF PRESSURE VESSELS (SET) |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
| API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
| API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Logging out.