API 607 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS
Available format(s)
Hardcopy , PDF
Superseded date
31-10-2022
Superseded by
Language(s)
Russian, English
Published date
01-06-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative References
3 Terms and Definitions
4 Test Conditions
5 Fire Test Method
6 Performance
7 Qualification of Other Valves by Representative Size,
Pressure Rating, and Materials of Construction
Bibliography
Describes fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test.
| DocumentType |
Standard
|
| Pages |
22
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-PRF-32307 Revision A:2017 | VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 609 CHINESE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
| I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
| PIP PNSMV058 : 2010 | NICKEL AND NICKEL ALLOY PLUG VALVE DESCRIPTIONS |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| PIP PNSMV026 : 2013 | STAINLESS STEEL BALL VALVE DESCRIPTIONS |
| PIP PNSMV027 : 2017 | STAINLESS STEEL BUTTERFLY VALVE DESCRIPTIONS |
| API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
| DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| MIL V 24624 : 0 | VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE |
| 11/30246933 DC : 0 | BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
| API 608 REDLINE : 2008 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| 17/30334488 DC : 0 | BS ISO 21157 - SHIPS AND MARINE TECHNOLOGY - BALL VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS |
| BS ISO 28921-1 : 2013 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| NFPA 1 : 2021 | FIRE CODE |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| BS 6755-2:1987 | Testing of valves Specification for fire type-testing requirements |
| MIL-PRF-32187 Revision A:2017 | Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| MIL-A-24780 Base Document:1992 | ACTUATING ASSEMBLY, SINGLE LINEAR MOTION, FOR THE REMOTE ACTUATION OF QUICK ACTING VALVES, GENERAL SPECIFICATION FOR |
| API 553 : 2012 | REFINERY VALVES AND ACCESSORIES FOR CONTROL AND SAFETY INSTRUMENTED SYSTEMS |
| FM 7400 : SEP 2016 | LIQUID AND GAS SAFETY SHUTOFF VALVES |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| EEMUA 182 : 2004 | SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK |
| UNI EN 13942 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| MSS SP 92 : 2012 | MSS VALVE USER GUIDE |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
| API 608 CHINESE : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
| BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
| API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| API 608 RUSSIAN : 2012 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| 08/30180264 DC : DRAFT JUNE 2008 | BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| API 609 REDLINE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| API 556 REDLINE : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| API RP 615 : 2016 | VALVE SELECTION GUIDE |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| NFPA 1 : 2018 | FIRE CODE |
| PIP PCECV003 : 2017 | GUIDELINES FOR APPLICATION OF REMOTELY ACTUATED ON-OFF VALVES |
| NFPA 58:2024 | Liquefied Petroleum Gas Code |
| PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| PIP PNSMV056 : 2013 | NICKEL AND NICKEL ALLOY BALL VALVE DESCRIPTIONS |
| PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| PIP PNSMV007 : 2017 | CARBON STEEL BUTTERFLY VALVE DESCRIPTIONS |
| PIP PNSMV006 : 2013 | CARBON STEEL BALL VALVE DESCRIPTIONS |
| API STD 598 : 2016 | VALVE INSPECTION AND TESTING |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.