API 2FPS : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
Available format(s)
Hardcopy , PDF
Superseded date
19-02-2021
Superseded by
Language(s)
English
Published date
01-01-2011
Publisher
Special Notes
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Overall considerations
6 Basic design requirements
7 Actions and action effects
8 Global analysis
9 Structural considerations
10 Fatigue analysis and design
11 Monohulls
12 Semi-submersibles
13 Spars
14 Conversion and reuse
15 Hydrostatic stability and compartmentation
16 Mechanical systems
17 Stationkeeping systems
18 In-service inspection, monitoring and maintenance
19 Floating structure design and analysis - Other hulls
Annex A (informative) - Additional information and guidance
Annex B (normative) - API Floating Structures Design
Standards
Bibliography
Gives requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: a) production; b) storage and/or offloading; c) drilling and production; d) production, storage and offloading; and e) drilling, production, storage and offloading.
| DocumentType |
Standard
|
| Pages |
208
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 2SIM : 2014 | STRUCTURAL INTEGRITY MANAGEMENT OF FIXED OFFSHORE STRUCTURES |
| 04/19985215 DC : DRAFT DEC 2004 | BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| ABS 0276 : 2017 COR 2018 | GUIDANCE NOTES ON CONVERSION OF MOBILE OFFSHORE DRILLING UNITS TO FLOATING PRODUCTION INSTALLATIONS |
| API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
| ISO 19904-1:2006 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars |
| CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| ABS 0249 : 2017 | GUIDANCE NOTES ON AIR GAP ANALYSIS FOR SEMI-SUBMERSIBLES |
| 17/30291980 DC : 0 | BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
| I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
| EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
| ABS 0286 : 2017 COR 2018 | GUIDANCE NOTES ON NEARSHORE POSITION MOORING |
| ABS 0217 : 2017 | GUIDANCE NOTES ON LIFE EXTENSION METHODOLOGY FOR FLOATING PRODUCTION INSTALLATIONS |
| BS ISO 19904-1 : 2006 AMD 16927 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API 2INT-DG : 2007 | INTERIM GUIDANCE FOR DESIGN OF OFFSHORE STRUCTURES FOR HURRICANE CONDITIONS |
| CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| IMO IB701 : 2005 SUPP 2016 | INTERNATIONAL CONFERENCE ON LOAD LINES |
| BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
| BV NR494 : R02 | RULES FOR THE CLASSIFICATION OF OFFSHORE LOADING & OFFLOADING BUOYS |
| ISO 17643:2015 | Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| ABS 0075 : 1995 | GUIDE FOR IMPROVEMENT FOR STRUCTURAL CONNECTIONS AND SAMPLE STRUCTURAL DETAILS - SERVICE EXPERIENCE AND MODIFICATIONS FOR TANKERS |
| ISO 19901-2:2017 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| BV NR384 : R01 | HULL STRUCTURE DESIGN - ALUMINIUM ALLOY SHIPS (CHAPTER 12) |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 9089:1989 | Marine structures — Mobile offshore units — Anchor winches |
| BV NR184 : R00 | RULES FOR THE CLASSIFICATION AND CERTIFICATION OF LIFTING APPLIANCES OF SHIPS AND OFFSHORE UNITS |
| AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| BV NI171 : R00 | SLOSHING ON BOARD SHIP PARTIAL FILLING STUDY |
| ISO 10420:1994 | Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ISO 2394:2015 | General principles on reliability for structures |
| ISO 17636:2003 | Non-destructive testing of welds — Radiographic testing of fusion-welded joints |
| ABS 0131 : 2004 COR 2012 | GUIDE FOR INERT GAS SYSTEM FOR BALLAST TANKS |
| ABS 0132 : 2004 | GUIDANCE NOTES ON RELIABILITY-CENTERED MAINTENANCE |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 19903:2006 | Petroleum and natural gas industries — Fixed concrete offshore structures |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ISO 281:2007 | Rolling bearings — Dynamic load ratings and rating life |
| ABS 0120 : 2003 | GUIDE FOR SURVEYS USING RISK-BASED INSPECTION FOR THE OFFSHORE INDUSTRY |
| IMO IB874 : 2009 SUPP 2011 | INTERNATIONAL CODE ON INTACT STABILITY |
| ISO 17640:2017 | Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment |
| IMO IA617 : 2000 SUPP 2007 | CRUDE OIL WASHING SYSTEMS |
| ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
| BV NI299 : R00 | GUIDELINES ON DOCUMENTS TO BE SUBMITTED FOR STABILITY STUDY |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| ISO 13535:2000 | Petroleum and natural gas industries — Drilling and production equipment — Hoisting equipment |
| ISO 19906:2010 | Petroleum and natural gas industries — Arctic offshore structures |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| ABS 0097 : 2000 | GUIDANCE NOTES ON RISK ASSESSMENT APPLICATION FOR MARINE AND OFFSHORE OIL AND GAS INDUSTRIES |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ABS 0140 : 2006 COR 2017 | GUIDE FOR 'SAFEHULL DYNAMIC LOADING APPROACH' FOR VESSELS |
| BV NR497 : R00 | HULL STRUCTURE OF PRODUCTION, STORAGE AND OFFLOADING SURFACE UNITS |
| IMO I661 : 1998 | GUIDELINES ON HARMFUL AQUATIC ORGANISMS |
| API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| ISO 2103:1986 | Loads due to use and occupancy in residential and public buildings |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| ABS 0074 : 1995 | GUIDE FOR ASSESSING HULL GIRDER RESIDUAL STRENGTH FOR TANKERS |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| BV NI409 : R00 | GUIDELINES FOR CORROSION PROTECTION OF SEAWATER BALLAST TANKS AND HOLD SPACES |
| ABS 0003 : 1975 NOTICE 11 | RULES FOR BUILDING AND CLASSING ALUMINIUM VESSELS |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API BULL 2U : 2004 | BULLETIN ON STABILITY DESIGN OF CYLINDRICAL SHELLS |
| BV NI393 : R01 | FATIGUE STRENGTH OF WELDED SHIP STRUCTURES |
| BV NR460 : R00 | SAFETY FEATURES OF OFFSHORE UNITS AND INSTALLATIONS |
| EN 13173:2001 | Cathodic protection for steel offshore floating structures |
| ABS 0122 : 2004 COR 2010 | GUIDANCE NOTES ON ALTERNATIVE DESIGN AND ARRANGEMENTS FOR FIRE SAFETY |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ISO 19901-5:2016 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction |
| AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
| BV NR445 : 2016 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS (FULL PACKAGE) |
| IMO IA867 : 1996 | CODE ON ALARMS AND INDICATORS |
| ABS 0073 : 2015 NOTICE 1 2016 | GUIDE FOR HULL CONDITION MONITORING SYSTEMS |
| ISO 13628-5:2009 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals |
| BV NI165 : R00 | ULTRASONIC TESTING OF HULL BUTT WELDS |
| API 2TD : 2006 | GUIDELINES FOR TIE-DOWNS ON OFFSHORE PRODUCTION FACILITIES FOR HURRICANE SEASON |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| IMO IA646 : 2006 | POLLUTION PREVENTION EQUIPMENT UNDER MARPOL |
| ISO 17638:2016 | Non-destructive testing of welds — Magnetic particle testing |
| API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
| ISO 76:2006 | Rolling bearings — Static load ratings |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| API 8A : 1997 | SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.