AGMA 2004 : C
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL
Available format(s)
Hardcopy
Superseded date
09-03-2020
Superseded by
Language(s)
English
Published date
01-01-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Materials
4 Manufacturing - material preparations
5 Heat treating of ferrous materials
6 Post heat treatment processes - metallurgical effects
7 Inspection and certification
Bibliography
Annexes
Annex A (informative) Definition of terms
Annex B (informative) Test methods and test coupons
Annex C (informative) Distortion and residual stress
Annex D (informative) Sources for additional information
Presents basic information and recommend sources of additional information pertaining to metallic gear materials, their treatments, and other considerations related to the manufacture and use of gearing.
| DevelopmentNote |
Supersedes AGMA 240.01 (03/2002)
|
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
American Gear Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AGMA 6135 : 2002 | DESIGN, RATING AND APPLICATION OF INDUSTRIAL GLOBOIDAL WORMGEARING (METRIC EDITION) |
| AGMA 6035 : 2002 | DESIGN, RATING AND APPLICATION OF INDUSTRIAL GLOBOIDAL WORMGEARING |
| AGMA 2005 : D | DESIGN MANUAL FOR BEVEL GEARS |
| AGMA 2101 : D | FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH (METRIC EDITION) |
| AGMA 2001 : D | FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH |
| BS EN ISO 14693:2003 | Petroleum and natural gas industries. Drilling and well-servicing equipment |
| API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| AGMA 937 : A2012(R2017) | AEROSPACE BEVEL GEARS |
| API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| ISO 14693:2003 | Petroleum and natural gas industries — Drilling and well-servicing equipment |
| EN ISO 14693:2003 | Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
| AGMA 6034 : B | PRACTICE FOR ENCLOSED CYLINDRICAL WORMGEAR SPEED REDUCERS AND GEARMOTORS |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| AGMA 6114 : B2015 | GEAR POWER RATING FOR CYLINDRICAL SHELL AND TRUNNION SUPPORTED EQUIPMENT |
| AGMA 6011 : I | SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ASTM A 833 : 2008 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| SAE J422_198312 | MICROSCOPIC DETERMINATION OF INCLUSIONS IN STEELS |
| ASTM A 291 : 2003 | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| AGMA 2003 : B | RATING THE PITTING RESISTANCE AND BENDING STRENGTH OF GENERATED STRAIGHT BEVEL, ZEROL BEVEL AND SPIRAL BEVEL GEAR TEETH |
| AGMA 6008 : A | SPECIFICATIONS FOR POWDER METALLURGY GEARS |
| AGMA 2101 : D | FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH (METRIC EDITION) |
| AGMA 1010 : E | APPEARANCE OF GEAR TEETH - TERMINOLOGY OF WEAR AND FAILURE |
| ASTM B 783 : 2013 : REDLINE | Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts |
| AGMA 920 : A | MATERIALS FOR PLASTIC GEARS |
| ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
| ASTM A 897/A897M : 2016 : REDLINE | Standard Specification for Austempered Ductile Iron Castings |
| AGMA 938 : A | SHOT PEENING OF GEARS |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| AGMA 6135 : 2002 | DESIGN, RATING AND APPLICATION OF INDUSTRIAL GLOBOIDAL WORMGEARING (METRIC EDITION) |
| SAE J423_199802 | Methods of Measuring Case Depth |
| AGMA 2007 : C | GEARS - SURFACE TEMPER ETCH INSPECTION AFTER GRINDING |
| SAE AMS2301K | STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| AGMA 6001 : D | DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| AGMA 939 : A | AUSTEMPERED DUCTILE IRON FOR GEARS |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ASTM E 1077 : 2014 : REDLINE | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| SAE J419_198312 | METHODS OF MEASURING DECARBURIZATION |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| AGMA 6005 : B | POWER RATING FOR HELICAL AND HERRINGBONE GEARING FOR ROLLING MILL SERVICE |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM A 148/A148M : 2015-09 | SPECIFICATION FOR STEEL CASTINGS, HIGH STRENGTH, FOR STRUCTURAL PURPOSES |
| SAE AMS2304B | STEEL CLEANLINESS, SPECIAL AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| SAE AMS2300L | STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM A 290 : 2002 | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| AGMA 6133 : B | MATERIALS FOR PROPULSION GEARING (METRIC EDITION) |
| AGMA 6032 : A | STANDARD FOR MARINE GEAR UNITS: RATING AND APPLICATION FOR SPUR AND HELICAL GEAR TEETH |
| ASTM A 275/A275M : 2015-05 | PRACTICE FOR MAGNETIC PARTICLE EXAMINATION OF STEEL FORGINGS |
| AGMA 930 : A | CALCULATED BENDING LOAD CAPACITY OF POWDER METALLURGY (P/M) |
| AGMA 1012 : 2005 | GEAR NOMENCLATURE, DEFINITIONS OF TERMS WITH SYMBOLS |
| SAE J864_199305 | SURFACE HARDNESS TESTING WITH FILES |
| ASTM A 534 : 2017 : REDLINE | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.